DEWALT PFM3612000 Wood-Knocker II+ Installation Tool Instruction Manual
- June 6, 2024
- Dewalt
Table of Contents
DEWALT PFM3612000 Wood-Knocker II+ Installation Tool Instruction Manual
Wood-Knocker II+ Installation Tool PFM3612000
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings, and instructions may result in electric shock, fire and/or serious injury.
WARNING! To reduce the risk of injury, read the instruction manual.
WARNING: Always use identical replacement parts to assure product safety and reliability of repairs, maintenance and adjustments.
The tool is constructed of materials that could act as a conductor of electrical current. Do not use on or near live electrical circuits.
Do not use in the presence of flammable liquids or vapors as sparking or static discharge could occur.
Do not strike with another striking tool.
To avoid possible injury from flying objects, safety goggles or equivalent eye protection conforming to ANSI Z87.1 should be worn by the user and by all persons in the immediate area in which any striking tool is being used.
Assembly Instructions
-
Release locking pin by pulling outwards. Rotate 90° to keep the locking pin clear of the hammer.
-
Attach preassembled Wood-Knocker II+ Installation Tool with Wood-Knocker II+ anchor.
-
Attach preassembled WoodKnocker II+ Installation Tool to DEWALT Wood-Knocker II+. Ensure install tool and anchor are perpendicular to wood material.
-
Pull handle vertically upward with top hand, then forcefully drive downward. The mass of the internal bar will impact the anchor for installation. Repeat until anchor is fully embedded into material per proper Wood-Knocker II+ installation instructions.
-
Drive head of anchor downwards until head contacts plastic.
-
Align safety pin position to lock when complete with application. Slide outer tube upward to ensure locking pin is engaged.
WARNING: Always lock the tool for carrying or moving to another anchor location. Grip the tool firmly when carrying.
If you have any questions or comments about this or any DeWALT tool, call us toll free at: 1-800-4-DeWALT (1-800-433-9258)
DeWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 Part No. N884802 PFM3612000 Copyright © 2020
The following are trademarks for one or more DeWALT power tools: the yellow and black color scheme, the “D” shaped air intake grill, the array of pyramids on the handgrip, the kit box configuration, and the array of lozenge-shaped humps on the surface of the tool.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>