SOAIY Lamp-007 Sound Machine and Night Light User Guide
- June 5, 2024
- SOAIY
Table of Contents
SOAIY Lamp-007 Sound Machine and Night Light User Guide
Email:[email protected]
Phone: + 1 (833) 5011185
New Version Relaxation Projection Light
Thank you so much for choosing our product, Lamp-007 is an upgrade relaxation
projection lamp, it can cast a vivid aurora borealis on ceiling, more than 7
kinds of light models. Create an enjoyable and relaxing bedtime experience for
children. Also perfect for adults to create various of hypnotic sounds, it can
imitate a sleep scene, let you could fall asleep fast, it is very helpful for
you to improve sleep quality.
Attention: Please read and follow all the alerts and instructions, to keep this user manual for further reference.
Precautions
- “Caution – use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.”
- “CAUTION – The use of optical instruments with this product will increase eye hazard.”
Each Part of the Product
- Long press for power on or off / Short press to rotate on or off
- Long press for Vol + / Short press to switch light pattern
- Long press for Vol – / Short press to switch sound
- USB Power Port
- Cover
- Stand
- Right speaker
- Left speaker
- Anti slip mat
Special Function Instructions
- Built-in 7 lighting patterns and 6 music patterns.
- It has self-support, when you open it, it is 0 degree, otherwise it is 45 degrees angel when it closed. ( Default closed position).
- Take off the dome cover, it is a beautiful projection lamp, with the dome on, you could use it as a little night light.
- Built-in a stereophonic loudspeaker, can adjust volume.
- Built-in Bluetooth Function (Should be used with remote control).
General Operation
A. Basic operation
- Turn On/Off Projection light: Long press “Power Button” on the light base or ” d) ” button on the remote.
- Adjust lighting patterns: Short press the “+” button on the light base or “Light Pattern” button on the remote.
B. Bluetooth paring operation
- lf you are listening to 6 nature sounds, press “Audio Switch” on the remote then you can hear a small voice “Bluetooth Mode”, then open your phone’s Bluetooth, find “Lamp-007” on Bluetooth list and connect with this device.
(Attention: When the volume reached the maximum or the minimum will
appear beep sound)
Exchange of the all modes
You could use the remote to change the any working modes you wanted.
- Whether it is Bluetooth mode, it has one key to the nature sound.
- When in the nature sound mode, you could use “Audio Switch”button on the remote to Bluetooth mode.
Remote control operation
Attention: Before you use the remote, please check whether it has battery isolate piece or not, if yes, please remove it.
Product Specification
Product name:Sound Machine & Night Light
Model No: LAMP-007
Laser class: Class I
Manufacturer’s name:
Shenzhen LongXiang lntelligent Technology Co.Ltd.
Manufacturer’s address:
FLOOR 4,BUILDING D,FUXINLIN INDUSTRIAL AREA,
HENGCHENG INDUSTRIAL ZONE FUHUA COMMUNITY XIXIANG STREET,BAOAN DISTRICT
SHENZHEN GUANGDONG CHINA
Made in China
Production Date:March 2022
Complies with 21 CFR Chapter 1,Subchapter J.
Package Includes:
- Ix User Manual
- Ix Remote control
- Ix AC adapter
- Ix 1.8m USB cable
- Ix Relaxation Projection Light
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance
could void the user’s authority to operate the equipment. This equipment has
been tested and
found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful
interference to radio communications. However, there is no guarantee that
interference will
not occur in a particular installation. If this equipment does cause harmful
interference to
radio or television reception, which can be determined by turning the
equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
Read More About This Manual & Download PDF: