JLAB Talk USB Microphone User Guide
- June 6, 2024
- JLab
Table of Contents
JLAB Talk USB Microphone
We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab authorization and at our sole
discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlab.com or visit
jlab.com/contact
SETUP
-
Connect USB-C to Talk microphone.
-
Enter your PC or Mac settings to make sure connection is established.
-
SETUP TALK with PC / MAC
SETUP TALK WITH PC (WINDOWS 7, 8, or 10) -
From the Start menu, select the Control Panel.
-
From the Control Panel, select the Sound icon.
-
Select the Recording tab and select “JLab Talk”.
-
Select the Playback tab and select “JLab Talk”.
SETUP TALK WITH MAC (macOS 10.10 or HIGHER)
- Open System Preferences and select the Sound icon.
- Select the Input tab and select “JLab Talk”.
- Select Output tab and select “JLab Talk”.
- From this screen, set the Output volume to desired level.
CONTROLS
IN USE
-
The Talk works with almost any recording software installed on macOS, Windows, or Linux.
Review in your software’s setting and adjust accordingly. -
No additional drivers/software are needed for the Talk. Simply plug in and setup in device settings.
-
Talk will not work through a power bank/battery pack. It will only work with USB-A input with an operating system.
Shop products | Product alerts | Burn-in your headphones
JLab Store + Burn-in Tool
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>