MaxiAIDS 124684 Radio Controlled Clock Alarm with Indoor Thermometer Instruction Manual
- June 6, 2024
- MaxiAIDS
Table of Contents
MaxiAIDS 124684 Radio Controlled Clock Alarm with Indoor Thermometer
Instruction Manual
FUNCTIONS INTRODUCTION
- U.S. Radio controlled dock (RCC) function
- Time display: Hour, Minute and Second. 12HR/24HR format.
- Alarm with 5-minute snooze function
- Date, Week, and indoor temperature display in C/F.
- Switch 4 different time zones(P-M-C-E) in U.S. .
- Daylight saving time (DST) function
MAIN FEATURES WITH CONTROL BUTTONS:
ABOUT RADIO RECEPTION INSTRUCTIONS
- Within the range of RCC signal, the dock will receive RCC and adjust time automatically
- When the dock is electrified and reset to the default values, the clock will receive RCC automatically
- Press UP/MANUAL key for 2 seconds, he dock will forcibly receive RCC.
- When the clock is receiving radio signal, the radio reception icon will start to blink.
- The clock will receive RCC at 2:00am, 3:00am, 4:00am automatically every day. If the clock receives RCC once, it won’t receive it again that day, e.g. if the clock receives RCC at 2:00am, it won’t receive RCC at 3:00am or 4:00am. Next day, it will receive RCC again automatically
SETTING THE TIME AND CALENDAR MANUALLY
- Under time display mode, press set key for 2seconds, the clock will enter into Time setting mode, press again to display following different setting modes in sequence: 12HR/24HR → hour→ minute → year→ month→ day→confirmation
- Under above setting mode, Press UP key to advance values,had the key to increase values quickly Press SET key to confirm the adjustment and return to time display mode.
- Under above setting modes, if the clock is left untouched for 30 more minutes, the clock will return to the normal time display mode.
SETTING ALARM
- Press MODE key to enter into the alarm setting mode, press SET key for 2 seconds, the clock will enter into the alarm setting mode, press again to switch the following setting modes in sequence: hour → minute→ confirmation
- Under above setting mode, Press UP key to advance values, hold he key to increase values quickly.
- Under alarm display mode not setting mode, press UP key to turn on/off the alarm.
- When the alarm is working, press SNZ key, the alarm will react after 5 minutes.
- Under alarm display mode not setting mode, if the dock is left untouched for 1 minute, the dock will return to time display mode.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>