MaxiAIDS BT-A31 Talking Digital Thermometer Instructions

MaxiAIDS BT-A31 Talking Digital Thermometer

Intended Use

Digital Thermometer, Model # BT-A31 is intended for monitoring human body temperature by physician or consumers in hospital or home.

Operation

1. When the thermometer is ready to measure the temperature, you will hear audio announcement “Please measure”
2. When the measurement is complete you will hear the audio announcement for the measured result.
3. Press blue audio button again, the latest temperature reading will be announced & displayed on the LCD screen.

What is a “Normal” temperature?

Although the generally accepted “normal” temperature reading is 37.0 ‘C /98.6°F. temperature readings can vary from 36.1’C/97.0’F to 37.2°C /99.0’F and still may be considered “normal”. Variations in temperature can be attributed to activities such as exercise, smoking, eating and drinking. Your temperature is lower in the morning than in the afternoon. Other variations may be due to the location of the temperature reading. While the oral temperature follows the guidelines previously described, a rectal temperature is generally 0.5°C /1.0’F higher. Conversely, an axillary (under the arm) temperature will be 0.5°C /1.0’F lower.

How to switch audio option to mute condition?

During POWER OFF mode, press POWER button for about 5 seconds until you see ‘ON’ or ‘OFF’ to display on the screen. Then you can remove your finger from the button and quickly click on the “POWER” button again to switch. (Reminder: This may take you 4 – 5 seconds to see ‘ON’ or ‘OFF’ icon to display on the screen for you to switch.

How to switch voice processor announcements between English and Spanish Feature?

During POWER OFF mode, press the POWER button for about 10 seconds until you see 01 displayed on LCD, then release the POWER button. Continually press POWER button to allow to switch the voice announcement between English and Spanish, 01 means English, 02 means Spanish.

How to switch Celsius and Fahrenheit degrees on the display screen?

During POWER OFF mode, press POWER button for about 15 seconds until “C” or “F” symbol blinks on LCD display, then release POWER button. Continually press POWER button to allow you to prompt to switch display to either Fahrenheit or Celsius.

Features of your digital thermometer

How to take your temperature

1. Press “POWER” button to activate. The unit would beep and (or ) for around 2 seconds.
2. 37.0°C (or 98.6’F) will display after the latest measured temperature is displayed with an “M” icon at the bottom of right corner.
3. When Lo and flashing ‘C (*F) displays, the thermometer is ready for measurement but if the room temperature is higher than 32.0°C (89.6’F), the room temperature would be displayed instead of Lo.
4. Beep sound alerts when measurement is complete.
5. Press “POWER” button to turn off the thermometer.
   • (The thermometer will automatically power off in ten minutes if the thermometer is not in use.)

Taking an Oral temperature

• Place the probe tip under the tongue and keep it near to the heat pocket as close as possible.
• Approximate measuring time: 8 seconds.
• Suggestion: Close your mouth for at least 2 minutes before taking your temperature.

Taking a Rectal temperature

• Apply a water-soluble lubricant to the probe cover.
• Gently insert the probe (MAXIMUM 1/2″) into the rectum.
• Approximate time for measurement: 10-30 seconds.

Note: Rectal temperatures are generally 0.5 C /1.0 F higher than oral readings.

Replacing the battery

• The battery in your digital thermometer needs to be replaced when you see the icon appear at the bottom of right corner.
• Replace the batteries with 2 CR2025.

To replace the battery

1. Remove the battery cover from the back of the thermometer.
2. Remove the plastic security chip from battery compartment.
3. Use a non-metal pointed tool to remove the battery.
4. Place battery cover back after the 2 new CR2025 (2*3V) batteries have been replaced.

Note

• Please properly discard the batteries.
• KEEP away from small children and heat.

Specifications

Cleaning instructions

• Each time, before or after using the thermometer, please clean it with a soft cloth that has Isopropyl rubbing alcohol diluted with water or wash it with cold soap and water.
• The thermometer can not be submersed into water or alcohol. Do not soak or sterilize by boiling, gas or steam autoclaves method.

Precautions

1. The thermometer should only be used under the supervision of an adult. Please keep away from children.
2. Do not walk, run or talk while taking temperature.
3. Do not keep the thermometer directly exposed in sunshine or any environment with dust, humidity or extreme temperature.
4. Dropping or subjecting your thermometer with strong shocks should be avoided.
5. Do not attempt to disassemble the thermometer, except for replacing the battery.

Guidance and manufacturer’s declaration – electromagnetic immunity

Explanation of Symbols

• Symbol for ‘CE’
• Symbol for batch code
• Symbol for manufacturer
• Symbol for “electrical and electronic equipment”
• Symbol for TYPE BF APPLIED PART”
• Symbol for “Follow operating instructions”
• Symbol for “the IP classification”

LIMITED WARRANTY

• REIZEN guarantees that its Digital Thermometer will be free from manufacturing defects under normal use for 1 Year.
• This warranty covers only normal use, and does not apply to use in any clinical or commercial applications. This warranty does not cover batteries or other power sources that may be provided with or used with the Digital Thermometer.
• This warranty is voided if the Digital Thermometer product is misused or abused in any manner.
• If the Digital Thermometer fails to operate during the time the original purchaser owns it. Please call Maxi Aids Inc. customer care team at our Toll Free number: 800.522.6694 for further assistance. Repair or replacement of the defective unit, at the warrantor’s option, is the sole remedy under this warranty.
• ANY IMPLIED WARRANTIES WHICH THE PURCHASER MAY HAVE ARE LIMITED IN DURATION TO THE TIME THAT THE ORIGINAL CONSUMER PURCHASER OWNS THE PRODUCT. Some states do not allow limitations or how long an implied warranty lasts, so the above limitaion may not apply to you.
• This warranty constitutes the warrantor’s only responsibility and obligation to repair and/or replace materials or components, or refund the purchase price. The warrantor will not be responsible for any indirect, incidental, special, consequential, or punitive damages or other loss, including, but not limited to, damage to or loss of other property or equipment and personal injuries, whether to purchaser or others.
• The warrantor shall in no event be liable to the purchaser for any amount in excess of the cost of repair and/or replacement of the unit, or the purchase price of the unit.
• Some states do not allow the exclusive or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
• This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

CONTACT

Distributed By

• Fudakang Industrial LLC.
• Princeton Junction, NJ08550

Customer Care By

• Maxi Aids Inc.
• Toll-Free: 800-522-6294

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>