ROCKLER Dust Right 650 CFM Dust Canister Filter Instructions

GENERAL SAFETY WARNINGS

This product is designed only for specific applications as defined in the instructions and should not be modified or used for any manner not described in these instructions. Use only recommended accessories. Before using the 650 CFM Dust Canister Filter:
READ, UNDERSTAND and FOLLOW ALL INSTRUCTIONS AND SAFETY WARNINGS. KEEP THESE INSTRUCTIONS READILY AVAILABLE FOR FUTURE REFERENCE.

Always confirm that you are using the most recent version of the Instructions and safety warnings for your product (see the Instructions link on the product page at Rockler.com).
Before using another tool with this product, always read, understand, and follow the instructions and safety warnings in the owner’s manual for that tool. If you do not have the owner’s manual, obtain one from the tool’s manufacturer before using it with this product.

Before using any chemical with this product, always read, understand, and follow all safety warnings and guidelines in the manufacturer’s Safety Data Sheet (SDS; formerly  called “MSDS”), especially regarding:

• How to safely use the chemical, including potential hazards and recommended first aid measures;
• Personal safety equipment required to safely use the chemical (e.g. gloves, eye protection, mask/respirator, etc.);
• Proper and safe handling, storage, and disposal of the chemical.

Before using this product, review and verify that all tools to be used with it have safety equipment installed and are in proper working order as defined by the tool’s owner’s manual.
Do not use this product until you have read and are confident you understand:

• Product Specific Safety Warnings (p. 3);
• Assembly (pp. 3-4);
• Maintenance (p. 4).

The user assumes all risk and responsibility for the proper and safe use of this product and for ensuring product suitability for the intended application.
It is the sole responsibility of the purchaser of this product to ensure that anyone you allow to use this product reads and complies with all instructions and safety precautions outlined in this manual prior to use.

Follow all standard shop safety practices, including:

• Keep children and bystanders away from the tool operating area;
• Do NOT use power tools in explosive environments, or in the presence of flammable liquids, fumes, or dust;
• TURN OFF AND UNPLUG all power tools BEFORE making any adjustments or changing accessories;
• Remain alert and use good judgment. Do not use this product if you are in any way impaired by medications, alcohol, drugs, or fatigue;
• Keep your work area well lit and clean;
• Dress appropriately. Secure loose clothing, remove all jewelry, and tie up long hair before using this product;
• ALWAYS wear safety glasses, hearing protection, and respiratory protection that complies with NIOSH/OSHA/ANSI safety standards;
• Use dust collection tools and dust face masks to reduce exposure to dust;
• Use safety equipment such as feather boards, push sticks and push blocks, etc., when appropriate;
• Maintain proper footing at all times and do not overreach;
• Do NOT force woodworking tools.

These warnings and instructions do NOT represent the total of all information available regarding tool safety, use, and technique. Always seek out opportunities to learn more and improve your skills and knowledge.

WARNING Drilling, sawing, sanding, or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.

| Danger indicates a hazardous situation that, if not avoided, will result in death or serious injury.
Warning indicates a hazardous situation that, if not avoided, could result in death or serious injury.
Caution indicates a hazardous situation that, if not avoided, may result in minor or moderate injury or property damage.
The notice indicates important or helpful information and/or user tips.
---|---

PRODUCT-SPECIFIC SAFETY WARNINGS

Turn off and unplug your Dust Right 650 CFM Wall-Mount Dust Collector before attempting to install the Canister Filter, emptying or changing the Plastic Bag before any maintenance.

Make sure to read, understand and follow all of the safety rules and instructions in the manual that came with your Dust Right 650 CFM Wall-Mount Dust Collector when using it with the Canister Filter.
Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
Periodically inspect dust and filter bags for any cuts, rips or tears. Do NOT operate the dust collector with a damaged bag or hose.
After assembly or maintenance, make sure that you have removed all loose tools from the machine before turning it on.
Empty bag regularly. Do NOT fill the bag more than half-full.
Wear safety glasses and a dust mask/respirator while emptying the bag.

Use proper lifting technique and get the help of another adult to lift the Canister Filter when attaching it to the Dust Collector. Failure to do so could result in serious injury.

For the easiest installation of the Canister Filter, first mount the Dust Right 650 CFM Wall-Mount Dust Collector at its final location, following the instructions that came with the dust collector.
When mounting the Dust Collector, the top set of Lag Screws must be located at least 65″ from the floor to provide needed clearance for the Large Canister Filter.
This Canister Filter is designed for use ONLY with the Dust Right 650 CFM Wall-Mount Dust Collector.

Assembly

1. Wrap the 30mm Foam Tape around the bottom of the wall mount dust collector outlet, making sure the bottom edge of the tape is against the outlet flange. Trim any excess.
2. Fit the Gasket onto the wall mount dust collector outlet, keeping it toward the bottom, against the flange.

1/4″ x 1/2″ Flange Bolts will thread into the Attachment Collar pieces in only one direction, and be sure to align the holes in the Attachment Collar with the holes in the Gasket.

3. Bring the two pieces of the Attachment together around the Foam Tape on the dust collector outlet and connect them with the 1/4″ x 1/2″ Flange Bolts. Use the Open
   Wrench to tighten.

Use proper lifting techniques and get the help of another adult to lift the Canister Filter when attaching it to the Dust Collector. Failure to do so could result in injury.

4. Bring the Canister Filter to the dust collector outlet, making sure the post for the Foldable Handle is oriented toward the right. Align the holes in the Canister Filter top with the holes in the Attachment Collar and attach with the 5/16″ x 1/2″ Flange Bolts. Use the Open Wrench to tighten.
5. Slide the Handle onto the post projecting from the top of the Canister Filter, lining up the hole for the 5/16″ x 3/4″ Set Screw with the flat area on the post. Thread the Set crew into the Handle and thread the 5/16″ Nut loosely onto the Set Screw. Use the Hex Wrench to tighten the Set Screw; then use the Open Wrench to tighten the nut.  (The Handle is used to spin a paddle mechanism inside that dislodges built-up dust from the pleated filter.)
6. Apply the bottom of the 20mm Foam Tape around the bottom of the Canister Filter. Trim any excess.
7.  Fit the Plastic Bag over the bottom of the Canister Filter, making sure the edge extends at least to the top of the Foam Tape. Install the Clamp tightly around the Plastic Bag.

Maintenance

Turn off and unplug your Dust Right 650 CFM Wall-Mount Dust Collector before attempting to install the Canister Filter, emptying or changing the Plastic Bag, and before any maintenance.
Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
Periodically inspect dust and filter bags for any cuts, rips, or tears. Do NOT operate the dust collector with a damaged bag or hose.
After assembly or maintenance, make sure that you have removed all loose tools from the machine before turning it on.
Empty bag regularly. Do NOT fill the bag more than half-full.
Wear safety glasses and a dust mask/respirator while emptying the bag.

1. With the Dust Collector turned off, turn the handle a couple of times to dislodge dust that has built up in the pleated filter.
2. Once the Plastic Bag becomes about half-full, turn off and unplug the Dust Collector and then release the Clamp to free the bag for emptying or replacement.
3. Reinstall the emptied Plastic Bag or install a replacement as described in Step 7 in the Assembly section. Check Rockler.com for updates. If you have further questions,  please contact our Technical Support Department at 1-800-260-9663 or support@rockler.com

Distributed by Rockler Companies, Inc.
4365 Willow Dr. Medina, MN 55340
53522
Rev 05/21
1-800-279-4441
www.rockler.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>