JLAB 6460027 Studio Pro ANC Over-Ear Headphone User Manual

JLAB 6460027 Studio Pro ANC Over-Ear Headphone

FIRST TIME SETUP: BLUETOOTH PAIRING

1. Turn on the Bluetooth in your device settings.
   

2. Press and hold button for 8 seconds. Release. Lights will flash blue/red. Settings Bluetooth
   

3. Select “JLab Studio Pro ANC” in your device settings to connect.
   

PAIRING NEW / ADDITIONAL DEVICES

Turn OFF Bluetooth on your previously paired device and turn ON Bluetooth on new device. Repeat FIRST TIME STEUP process for new devices.

Notes:

• Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device.
  The headphone is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.).

• Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future.
  Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings.

• If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.

BUTTON FUNCTIONS

ACTIVE NOISE CONTROL

CHARGING

Connect to computer or USB 5v 1A (or less) output device.

AUX INPUT

NOTE:

• The ANC function can work when connected with AUX INPUT. Press and hold 2+ seconds the ANC button to power ON ANC.
• The AUX INPUT will override your Bluetooth device connection. Unplug and press power button 2+ seconds to revert back to Bluetooth.
• The button functions for your Bluetooth device will not work when AUX INPUT is connected.
• The volume will be dependent on your AUX device settings. Adjust accordingly.

CAUTIONS

• Avoid getting moisture or liquids on the headphone cups.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
• Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality
•  If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use

Shop products | Product alerts | Burn-in your headphones
JLab Store + Burn-in Tool

|

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>