IMOU F Series Indoor IP Camera User Guide

June 6, 2024
imou

IMOU F Series Indoor IP Camera

Packing List

Packing List

Camera Introduction

Camera Introduction

Note

  • Press the Reset/WPS button to enable WPS.
  • Press and hold the Reset/WPS button for 10 s to reset the camera
  • The pattern of the LED indicator is included in the following table.
LED Indicator Status Device status
Off l  Powered off/LED turned off

l  Rebooting after reset

Red light on| l  Booting completed

l  Device malfunction

Green light flashing| Waiting for network
Green light on| Operating properly
Red light flashing| Network connection failed
Green and Red light flashing alternately| Firmware updating

Operation with Imou App

  1. Scan the following QR code or search “Imou” in Google Play or App Store to download and install Imou App.Operation with Imou App
  2. Run Imou App, and then register an account for first use.
  3. Connect the camera to power source with the power adapter.
  4. Wait for booting to be finished, and then the camera indicator flashes with green light.
  5. Connect your smart phone to your Wi Fi network, and make sure your smartphone is connected to Wi Fi network with 2.4 GHz band, and then do the following operations to finish adding camera.

Operation with Imou App 1

Note

  • If you have more than one camera, do step 5 to add them one by one.
  • If the Wi Fi network changed or the indicator status goes wrong, reset the camera, and then do step 5 to add it again.

Installation Camera

Installation Camera

Disclaimer

  • This quick start guide is for reference only. Minor difference might be found in user interface.
  • All the designs and software here are subject to change without prior written notice.
  • All trademarks and registered trademarks mentioned are the properties of their respective owners.
  • Please visit our website or contact your local service engineer for more information.
  • If there is any uncertainty or controversy, please refer to our final explanation.

Hereby, ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. declares that the radio equipment type Ranger Pro is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.dahuasecurity.com/support/notice/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals