LIECKE EP18108 Smart Bluetooth Speaker “DJ Roxxx Big Woody” User Guide

LIECKE EP18108 Smart Bluetooth Speaker “DJ Roxxx Big Woody”

Specifications

• DIMENSIONS: ‎8 x 13.6 x 4.6 cm
• WEIGHT: 560 grams
• BLUETOOTH-VERSION: 1, up to 10 m range
• CAPACITY OF INTEGRATED BATTERY: 1200 mAh
• POWER SUPPLY: 5V / 1A
• MAXIMUM OUTPUT: 5 Watt, 0.5%THD @ 1kHz
• FREQUENZBAND: 2402 MHz
• AUX INPUT RESISTANCE : 20kΩ
• MAXIMUM PLAY TIME: 6-8h, depending on volume and genre
• SUPPORTED AUDIO FORMATS: MP3
• SUPPORTED MEMORY CARDS: TF / Micro SD up to 32Gbyte
• POWER SUPPLY: USB 5V / 1A

The wireless Bluetooth speaker was created for fans of vintage design, and its true wood construction, which is reminiscent of vintage radios, makes it stand out in your home. It is perfect for use in the living room, on a desk, or in the kitchen. gives your decor a contemporary feel.

PACKAGE CONTENTS
Before attempting to use this device, please check the packaging and make sure the following items are contained in the package:

GETTING STARTED

Step 1 : To switch the device on, just move the slide switch at the back of the device to the “ON” position.

Step 2: After switching on, the device will be in Bluetooth mode (signal tone sequence). To activate pairing, short press Play/Pause button. Now pair it with your smartphone or tablet. If a memory card is inserted, the speaker automatically switches to MP3 player mode. To activate radio mode, press Play/Pause for about 3 seconds.

Step 3: Volume can be controlled through turning the knob at the front.

Step 4 : Short press the forward and backward button to switch songs or radio channels depending on the mode the device is in. Station scanning will be activated by short pressing Play/Pause while in radio mode and can be interrupted by pressing a single button.

Step 5: Incoming phone calls can be taken by short pressing the multifunctional button (MFB). The calls can also be ended by pressing the MFB. The integrated microphone enables hands-free calls with the speaker.

Step 6: Switch the device off by using the slide switch at the side of the device.

Note: Before attempting to use the device for the first time, please charge the Battery for at least two hours. Like this the maximum life span will be ensured.

ESTABLISHING THE BLUETOOTH CONNECTION

Step 1: Switch the music box on. To use the Bluetooth function, NO memory card must be used.

Step 2: Open the settings menu of your device and look for the Bluetooth option. This must be activated. In the list of the found devices you will now find “LEICKE EP18108”. Connect. If a code is to be entered, please enter “0000”.

Step 3: Now the speaker is ready for use. Pairing will be saved and available when switching on the device the next time.

MP3 PLAYER

The MP3 function is activated by inserting a memory card. To switch between songs short press the forward or backward buttons. Volume can be controlled through turning the knob at the front. Please keep in mind, that Bluetooth is not available while a memory card is inserted.

RADIO

Before using the radio function, connect the charging cable to the speaker. The speaker must be switched off and the other end of the cable must not be connected to anything! It will work as antenna. Switch on the speaker and activate radio function by pressing Play/Pause until you hear a signal. Station scanning will be activated by short pressing Play/Pause while in radio mode. The scan is finished when the channels stop changing automatically. To change the channel short press forward or backward. Adjust volume by long pressing the forward and backward buttons.

To switch back to Bluetooth mode keep Play/Pause button pressed.

HANDS-FREE FUNCTION
Receive and finish incoming calls by short pressing the MFB. The integrated microphone will be activated automatically.

AMAZON ALEXA APP
Download the Alexa app for Android from the LEICKE website and set it up. If the Bluetooth speaker is paired with your smartphone while the app is running, you can activate Alexa from the speaker by short pressing the Play/Pause button. The microphone integrated in the loudspeaker records your voice commands and forwards them to the smartphone.

CONTROL ELEMENTS

CHARGING THE INTEGRATED BATTERY

When the battery is low (about 10 minutes run time left) the speaker alerts acoustically. In this case charge the speaker as soon as possible. Use a 5V 1A USB power supply to charge. Higher voltage may damage speaker and power supply. The red indicator light will stay on when the speaker is charging. Once it has finished charging the indicator light will go out.

TROUBLESHOOTING

First check if the speaker is charged and switched on. Our customer support will be glad to help you at info@leicke.com.

SAFETY NOTES

For your own safety and for long enjoyment of our product, please follow the following safety instructions:

• Please use device as described in the manual.
• To protect your hearing and widen the life span of the speaker, maximum volume should not be adjusted over a longer period of time.
• Use 5V /1 A power supplies only. The connection of power supplies with higher voltage leads to irreparable damage.
• Please keep power adapter and speaker dry and use in dry environment only. Do not touch with wet hands.
• Keep away from damp, high temperature, dusty, erosive and oxidative environment.
• Keep safe from being hit or falling down.
• Turn off power when device is not in use for a longer time.
• Do not open cover and do not touch inner parts.

FCC INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

IMPORTANT NOTE: Radiation Exposure Statement:

1. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users should follow the specific instructions in the user’s manual to comply with the FCC rules.
2. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

DISPOSAL

This device contains materials that must not be disposed of as household waste. Please check local laws concerning the applicable disposal regulations. Protect the environment by participating in recycling programs.

DECLARATION OF CONFORMITY
LEICKE GmbH herewith declares that the device complies with the RED 2014/53/EU und ROHS 2011/65/EG regulations. The declaration of conformity can be found at www.leicke.com. Go to the product you bought and look at downloads.

FAQs

If a Bluetooth speaker is left on, does the battery drain?

When phones are not in use, Bluetooth doesn’t seem to have an impact on battery life. As a result, it won’t drain your battery if unintentionally left on all night or for an extended period of time when inactive. If users forget to turn off Bluetooth, their batteries won’t typically drain more quickly.

Can the battery in a Bluetooth speaker be changed?

The bottom or back of Bluetooth speakers are often where you’ll find the batteries. The battery should be gently removed when the screws keeping it in place have been removed. It might even be necessary to pry the battery open. Use your screwdriver very cautiously as you do this.

How does the Bluetooth speaker on my phone work?

Ensure that Bluetooth is activated. Keep Bluetooth close at hand. Tap a connected but unpaired device from the list of paired devices. The Bluetooth gadget displays “Connected” when it is connected to your phone.

Can you use a Bluetooth speaker when it’s plugged in?

Every time you use it close to an outlet, leave it plugged in. The anode and the cathode are the two electrodes that make up a battery cell.

Are Bluetooth speakers musically superior to wired ones?

The two methods for playing music that are most frequently utilized are Bluetooth and auxiliary sound. Due to the fact that they both have important advantages, they are different from one another. Wired aux systems are absolutely unrivalled in terms of sound quality. Despite the fact that it could be challenging to tell the difference, Bluetooth fails in this regard.

What applications are there for Bluetooth speakers?

When paired with Bluetooth-enabled audio equipment, Bluetooth speakers are capable of wirelessly receiving digital audio over the Bluetooth protocol. Similar to conventional speakers, BT speakers receive digital audio through BT wireless transmission, convert it to analogue audio, amplify it, and then produce sound.

How long does a Bluetooth speaker last?

Of course, a built-in battery is necessary for a Bluetooth speaker to be portable. A portable speaker’s battery life typically lasts between 6 and 12 hours, while some versions have a 24-hour battery life.

Do Bluetooth speakers have a lower quality?

Although Bluetooth as it is now used does considerably reduce audio quality, it doesn’t have to. It is primarily the responsibility of device manufacturers to use Bluetooth in a manner that reduces audio quality as little as possible, or better yet, not at all.

How do you evaluate a Bluetooth speaker’s quality?

The sound quality of a Bluetooth speaker is the most crucial factor to consider. The overall harmonic distortion, which should be less than 1%, must be taken into consideration when evaluating the audio quality. The frequency range, which should be between 100 Hz and 20 kHz, should also be considered.

Does a Bluetooth speaker need Wi-Fi?

Yes. The use of Bluetooth is possible without Wi-Fi. Without an online connection, Bluetooth can be configured and used.

Why do people use Bluetooth speakers?

You want to be able to listen to the music wherever you go now that you have it. A nice Bluetooth speaker will come in helpful if you want to share the music with others, even if normally doing so requires bringing a pair of headphones.

Why are Bluetooth speakers different from wireless speakers?

Bluetooth and WiFi are the two wireless technologies now in use. In order to connect to your home network, use WiFi speakers. Since the majority run on AC power, outlets are typically needed. Bluetooth speakers can be instantaneously connected to by a computer, phone, or other device.

Is it worthwhile to buy a Bluetooth speaker?

Nearly all Bluetooth speakers are discreet but powerful. A Bluetooth speaker will be the ideal choice if you want to conduct a conference in a space without a radio or play music at your backyard barbecue. There’s no need to carry the stereo out to the terrace anymore.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>