LEICKE EP18105 Outdoor Bluetooth Speaker DJ Roxxx Active User Guide

LEICKE EP18105 Outdoor Bluetooth Speaker DJ Roxxx Active

• DIMENSIONS: 7 x 7 x 7.2 cm
• WEIGHT: 160 grams
• BLUETOOTH-VERSION: V 4.0, up to 10 m range
• PAIRING MECHANISM: NFC or manual
• CAPACITY OF INTEGRATED BATTERY: 1500 mAh
• MAXIMUM OUTPUT: 2×5 Watts
• LOUDSPEAKER SYSTEM: Stereo, two-way, 2 x 1.5“ with Bass-Boost
• MAXIMUM PLAY TIME: 5-6h, depending on volume and genre
• FREQUENCY BAND: 2402 MHz
• SENDELEISTUNG: 2,68 dBm
• SUPPORTED AUDIO FORMATS: MP3
• SUPPORTED MEMORY CARDS: TF / Micro SD up to 32Gbyte
• POWER SUPPLY: USB 5V / 500 mA

The wireless Bluetooth speaker was created for fans of vintage design, and its actual wood construction, which is reminiscent of vintage radios, making it a focal point that blends in with your

PACKAGE CONTENTS
Before attempting to use this device, please check the packaging and make sure the following items are contained in the package:

GETTING STARTED

Step 1: To switch the device on, press and hold the power button for 3 seconds. When switched on, the device will give acoustic feedback.

Step 2: After switching on, the device will be in Bluetooth mode (“Bluetooth mode has been on”). You can switch between Bluetooth, radio, line- in or MP3 player operation by pressing the mode button “M” shortly. If the speaker has been connected to a phone during prior usage, the connection will be automatically established in Bluetooth mode.

Step 3: Volume is controlled in all modes of operation by long pressing the forward (+) or backward (-) button for more than 2 seconds.

Step 4: Short press the forward and backward button to switch songs or radio channels depending on the mode the device is in.

Step 6: Switch the device off by pressing the power button for 3 seconds. The device will respond by playing a two-tone sequence.

Note: Before attempting to use the device for the first time, please charge the battery for at least two hours. Thereby the maximum life span will be ensured.

ESTABLISHING THE BLUETOOTH CONNECTION

Step 1: Switch the speaker on. Wait until you hear the acoustic response “Bluetooth mode has been on” from the device. During pairing, the status LED will blink fast.

Step 2: Open the settings menu of your device and look for the Bluetooth option. This must be activated. In the list of found devices you will now find “Bamboo BT008”. Connect. If a code is to be entered, please enter “0000”. If your phone is NFC-enabled and NFC as well as Bluetooth are activated, you can connect simply by holding your phone close to the connector side of the loudspeaker. If the connection is established successfully, the device will respond acoustically (“Paired”).

Step 3: Now the speaker is ready for use. Pairing will be saved and available when switching on the device the next time.

MP3 PLAYER

The MP3 function is activated by inserting a memory card and pressing the mode button until the speaker responds with “reader music mode”. To switch between songs short press the forward “+” or backward “-“ buttons. Adjust volume by long pressing the “+” and “-“ backward buttons.

RADIO

Before using the radio function, connect the charging cable to the speaker. The speaker must be switched off and the other end of the cable must not be connected to anything! It will work as antenna. Switch on the speaker and activate radio function pressing the mode button until you hear white noise. Station scanning will be activated by pressing the mode and the Play button simultaneously. The scan is finished when the channels stop changing automatically. To change the channel short press + or – . Adjust volume by long pressing the + or – buttons.

To switch back to Bluetooth mode press the mode button.

HANDS-FREE FUNCTION
Receive and end incoming calls by short pressing the Play/Pause button. The integrated microphone will be activated automatically. The last dialed number can be called by a long press (more than 3 seconds) on the Play/Pause button.

CHARGING THE INTEGRATED BATTERY

When the battery is low (about 10 minutes run time left) the speaker alerts acoustically. In this case, charge the speaker as soon as possible. Use a 5V 1A USB power supply to charge. Higher voltage may damage speaker and power supply. The red indicator light will stay on when the speaker is charging. Once it has finished charging, the indicator light will go out.

CONTROL ELEMENTS

TROUBLESHOOTING

First check if the speaker is charged and switched on. Our customer support will be glad to help you at info@leicke.com.

SAFETY NOTES

For your own safety and for long enjoyment of our product, please follow the following safety instructions:

• Please use device as described in the manual.
• To protect your hearing and widen the life span of the speaker, maximum volume should not be adjusted over a longer period of time.
• Use 5V /1 A power supplies only. The connection of power supplies with higher voltage leads to irreparable damage.
• Please keep power adapter and speaker dry and use in dry environment only. Do not touch with wet hands.
• Keep away from damp, high temperature, dusty, erosive and oxidative environment.
• Keep safe from being hit or falling down.
• Turn off power when device is not in use for a longer time.
• Do not open cover and do not touch inner parts.

FCC INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

IMPORTANT NOTE: Radiation Exposure Statement:

1. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users should follow the specific instructions in the user’s manual to comply with the FCC rules.
2. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

DISPOSAL

This device contains materials that must not be disposed of as household waste. Please check local laws concerning the applicable disposal regulations. Protect the environment by participating in recycling programs.

DECLARATION OF CONFORMITY
LEICKE GmbH herewith declares that the device complies with the RED 2014/53/EU und RoHS 2011/65/EU regulations. The declaration of conformity can be found at www.leicke.com. Go to the product you bought and look at downloads.

FAQs

What distinguishes a Bluetooth speaker from a wireless speaker?

The two available wireless technologies are Bluetooth and WiFi. WiFi speakers are used to connect to your home network. Since the majority use AC power, they frequently require an outlet. A computer, phone, or other device can immediately connect to Bluetooth speakers.

Is purchasing a Bluetooth speaker worthwhile?

Almost all Bluetooth speakers are small but effective. If you want to play music at your backyard BBQ or organize a meeting in a room without a radio, a Bluetooth speaker will be the perfect solution. No longer need to bring the stereo outside to the patio.

Is Wi-Fi required for a Bluetooth speaker?

Yes. Bluetooth can be used in the absence of Wi-Fi. Bluetooth may actually be set up and used without any form of internet connection.

Why are Bluetooth speakers used by people?

Now that you have the music, you want to be able to listen to it everywhere you go. While typically doing so calls for bringing a pair of headphones, there are instances when you’ll want to share the music with others, in which case a good Bluetooth speaker comes in handy.

What is the lifespan of a Bluetooth speaker?

A Bluetooth speaker must, of course, have a built-in battery in order to be portable. The normal battery life of a portable speaker is 6 to 12 hours, while some models can last up to 24 hours.

How can you know whether a Bluetooth speaker is good?

The most important aspect to think about when choosing a Bluetooth speaker is its sound quality. The audio quality must be assessed in relation to the overall harmonic distortion, which ought to be less than 1%. It is also important to take into account the frequency range, which should be between 100 Hz and 20 kHz.

Are wired speakers more musical than Bluetooth ones?

Bluetooth and auxiliary sound are two of the most often used ways to play music. They are unique from one another because they both possess significant advantages. When it comes to sound quality, wired aux systems are simply unmatched. Bluetooth falls short in this area, albeit it could be difficult to notice the difference.

What may a Bluetooth speaker be used for?

Bluetooth speakers are capable of wirelessly receiving digital audio over the Bluetooth protocol when used in conjunction with Bluetooth-enabled audio equipment. BT speakers work similarly to regular speakers in that they accept digital audio via BT wireless transmission, convert it to analogue audio, amplify it, and then turn it into sound.

How does my phone’s Bluetooth speaker function?

Make sure Bluetooth is turned on. Hold Bluetooth in your touch. From the list of paired devices, tap a device that is connected but not paired. When the Bluetooth device is linked to your phone, it shows “Connected.”

Can a Bluetooth speaker still be used while plugged in?

Leave it plugged in each time you use it close to an outlet. The two electrodes that make up a battery cell are the anode and the cathode.

Does a Bluetooth speaker’s battery deplete if it is left on?

Bluetooth doesn’t appear to have an effect on battery life when phones are not in use. Therefore, if accidentally left on overnight or during prolonged periods of inactivity, it won’t drain your battery. Users’ batteries won’t normally drain faster if they neglect to turn off Bluetooth.

Can a Bluetooth speaker’s battery be changed?

A Bluetooth speaker battery is frequently found in the bottom or rear of the speakers. After unscrewing the screws holding it in place, carefully remove the battery. Even prying the battery open might be required. As you finish this, use your screwdriver very gently.

If you use Bluetooth speakers, do you lose quality?

It doesn’t have to, even though Bluetooth as it is now utilized does somewhat lower audio quality. Device manufacturers are primarily responsible for using Bluetooth in a way that degrades audio quality as little as possible, or better yet, not at all.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>