LAB T YAK-001 Yakook Smart Medicine Checker User Manual
- June 6, 2024
- LAB T
Table of Contents
User Manual
SMART MEDICINE CHECKER
Quick Guide
Contents of the Package
Contents of the Package
How to Attach it
▶ Use double-sided tape on the bottom of the product to attach the product to
a place where it is easy to hang
▶ Hang the medicine bag in the hollow in the center of the product.
Power Control & Battery Change
How to turn on the power
The battery is already inserted when purchasing the product, so you can use it right after assembling the product.
How to change the battery
When replacing the battery of Yakook, disassemble the top and bottom plates, remove the used one, and insert a new one.
App Installation
Medication checker only works with its exclusive app. Take a picture of the QR code below or check out the app store or play store to find the exclusive Yakook app.
http://yakook.co.kr/en/app|
---|---
▶ Follow the instructions provided by the app for the connection between Yakook app and Yakook button.
Cautions
Refer to the safety precautions and the product guide for using on Yakook website to use this product safely.
Safety Precautions.
http://yakook.co.kr/en/guide|
---|---
Customer Support / Product Specifications
If you experience any problems using this product, contact customer support by
emailing appinfo@medisolution.co.kr
The limited warranty period for this product is one year from the date of
purchase.
If the product is defective or a functional error occurs during this period,
you can be exchanged the product for free or get its firmware updated.
| Connectivity | BLE 4.2 | Working Temp | 20 to 120°F |
|---|---|---|---|
| Optimal Range | Up to 30 ft. | Battery. | CR2477 (3v) |
| Dimensions | 2.2 x 2.0” | Certification | R-R-Mdp-YAK-001 |
| Weight | 8.8 oz | FCC ID | XXXXXX-XXXXX |
| Frequency | 2402 to 2480 MHz | Frequency output | -2 dBm ± 1 dB |
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Any Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
A minimum separation distance of 20 cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements.
SMART MEDICINE CHECKER
Main Features
Main Features
Button Test
If you press the button when
it is not the time to notify you
of the medication, the green
indicator flashes once.
**Flash once per click
**
| No Device Added
If you press the button of Yakook
that is not added on the app,
the red indicator flashes once. **Flash once per click
| No Notification Scheduled
Enter the medication time on the app.
The green indicator flashes every
10 seconds for 5 minutes from
the medication time. Flash every 10 min. With no schedules
※ Synchronizing the app and the device is recommended.
---|---|---
Medication Notification**
Enter the medication time on the app.
The green indicator flashes every
10 seconds for 5 minutes from
the medication time.
**Flash every 10 sec.
**
| Medication Input
Take medicine at the notification
and press the button to record
the medication. The green indicator
flashes three times.
**Flash three times with medication input
**
| Duplicate Medication Warning
If you press the button within five minutes
again after the medication, the red indicator
flashes three time.
**Flash three times for duplicated warning
**
---|---|---
Medication Reminding
If you do not press the medication
button despite the medication
reminder, the red indicator flashes
every 10 seconds for an hour.
Flash every 10 sec.
※ If a reminder for another medication is scheduled within an hour, it only
flashes until the next medication time.
| Power turned on
The green indicator flashes for
three seconds when the battery
is inserted.
**Lights on for 3 sec.
**
| Low Battery
When the battery remains at 20%,
the green and red indicators flash
alternately once every 10 minutes.
**Green & red flashes
**
---|---|---
MediPlus Solution Co., Ltd.
2nd Fl, 39 Seongbuk-ro, Seongbuk-gu, Seoul 02880, Korea
Copyright ⓒ 2021. Lab-T, Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>