LAB T LavvieBeacon Directional Bluetooth Antenna User Manual
- June 4, 2024
- LAB T
Table of Contents
User Manual
Copyright 2022. Lab-T, Inc.
LavvieBeacon Manual
LavvieBeacon Directional Bluetooth Antenna
LavvieBeacon is the Directional Bluetooth antenna that transmits electric signals inside LavvieBot S and supports data transmission between LavvieBot S and LavvieTAG.
How to use
1~2. Open the beacon cover and put the two batteries in it and close the cover
3~4. Attach the two double-sided tapes on the beacon cover and detach the sticker
5. Open the LavvieBot door and attach the beacon on the indented LavvieBot ceiling to the correct direction
MARKING ACCORDING TO THE ELECTRICAL APPLIANCES AND CONSUMER PRODUCTS SAFETY CONTROL ACT
-
Certification Information
****PurrSong
-
Product: Directional Bluetooth antenna
-
Model: LavvieBeacon
-
Input: DC 3V (AA*2)
-
Manufacturer: PurrSong, Inc.
-
AS center: +82-10-8853-1250 [email protected]
-
MADE IN KOREA
R-R-PSw-LavvieBeacon
XXX-XXXXX
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC ID : 2AWFPBCN1
IC: 26107-BCN1 -
Product Name: Directional Bluetooth antenna
-
Model Name: LavvieBeacon
-
Size: 8811737 (mm)
-
Input: DC 3.0V(AA*2)
-
Temperature setting for the use: 0 ~ 45
-
Place for the use: For residential use (indoor)
-
Manufacturer: PurrSong, Inc.
-
Address: D2, 179, Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea
-
Country of Origin: Republic of Korea
-
Date of manufacture: Indicated separately
-
RF SPEC.
1. Bluetooth- Frequency : 2402 ~ 2480 MHz
- Version : Bluetooth Low Energy 5.0
- Output : 3 dBm ± 1 dBm
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions : (1) This device may not
cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
-
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
-
RF Exposure Statement
A minimum separation distance of 20 cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements -
Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)this device must accept any interference, including interference that may cause undesired operation of the device.