AXLOIE-S5 True Wireless Sport Earbuds User Guide
- June 6, 2024
- axloie
Table of Contents
What’s in the Box
2 x Wireless Earbuds
1 x Charging Case
1 x USB Type-C Cable
4 x Pairs of Ear Tips (XS/S/M/L)
1 x User Manual
Product Overview
Precautions
- Make sure the earbuds. The Type-C port and USB port of the charging case are completely dry and clean before each charge.
- Please keep the earbuds dry and clean after each use.
- Please charge the charging case every 45 days at least to extend the battery life. • If you meet any problems during use, please contact us through the after-sales service hotline or E-mail.
Wearing
- Choose the ear tips that best suits your ears.
- Place the ear hooks on the ears, and then insert the earbuds into the inner ear canals.
- Adjust the earbuds to the most comfortable position.
Charging
- Open or close the charging case to activate the LED battery indicators.
- For the first time use, please tear off the insulation film on the charging pins of earbuds, and then fully charge the earbuds and the charging case.
- Please use the supplied Type-C cable to charge the charging case to prevent damage.
- Make sure the earbuds and Type-C port of the charging case are completely dry and clean before charging.
On/Off
Open the charging case and the earbuds will turn on automatically.
Put the earbuds back into the charging case and close the charging case, the
earbuds will turn off automatically.
Status of LED Indicator (Earbud)
| On| White light is always on for Is.
---|---|---
| Off| The red light is always on for Is.
- If you want to turn on the earbuds manually, press and hold the multi-function buttons (MFB) on both earbuds for 2 seconds until the LED indicators of the earbuds display white light for 1 second.
If you want to turn off the earbuds manually, press and hold the MFB on both earbuds for 5 seconds until the LED indicators of the earbuds display red light for 1 second.
Pairing
True Wireless Stereo Pairing: Open the charging case and the left earbud will pair with the right earbud automatically.
Status of LED Indicator (Earbud)
| White light flashes rapidly.| TWS pairing is going on.
---|---|---
| The white light goes out.| TWS pairing is done.
Connect to Bluetooth Device:
- Open the charging case and wait for 1 to 3 seconds. When the LED indicator on one earbud flashes red and white alternately, it indicates that the earbuds have been successful!. entered the Bluetooth connection mode.
- Turn on the Bluetooth function on your device, and then click “AXLOIE S5A:
- Wait for 3 to 5 seconds until a pop-up window appears, and then clic*tair! After the Bluetooth connection is successful, the indicators of the two earbuds go out.
| The LED indicator of the master earbud flashes red and white alternately and
the secondary one flashes white light once every 3s.| Bluetooth connection is
going on.
---|---|---
| The LED indicators of both earbuds go out.| Bluetooth connection is done.
The earbuds will automatically connect to your most recently connected device
(if available) when you turn on the AXLOIE 55 earbuds each time.
To pair with another Bluetooth device, open the charging case and make sure
the earbuds are being charged, then press and hold the button on the charging
case for 3 seconds until the LED indicator on one of the earbuds flashes red
and white alternately.
Control
Play/pause
|
Click the MFB on L/R
---|---
Previous song| Double-click the MFB on L
Next song| Double-click the MFB on R
Answer/hang up a call| Click the MFB on L/R
Reject a call| Press and hold the MFB on L/R for is
Activate voice assistant| Press and hold the MFB on L/R for is
Bass boost mode| In binaural mode, triple-click the MFB on L
Transparency mode| In binaural mode, triple-click the MFB on R
Volume -/+| 1. Directly adjust the volume through the phone.
2. For binaural use, in music playing or calling state, click the MFB on L
(volume -), or click the MFB on R (volume +).
•For single earbud use, it is not allowed to adjust the volume through the MFB
on earbuds.
Reset
If there are any connection or function problems with the earbuds, you can try resetting the earbuds.
- Put the earbuds in the charging case and make sure they are being charged.
- Keep the charging case open, and then press and hold the button on the charging case for 10 seconds until the LED indicators on the earbuds flash red light 3 times, and then turn white. At this time, all memory data will be cleared.
Status
| Descriptions|
Voice Prompt
---|---|---
On| White light is always on forts.| ‘AXLE “
Off| The red light is always on for ls.| “Power off”
Pairing| The LED indicator of the master earbud flashes red and white
alternately and the secondary one flashes white light once every 3s.|
“Pairing”
Connected successfully| The LED indicators of both earbuds go out.|
“Connected’
Being charged (earbuds)| Breathing red light| /
Fully charged (earbuds)| The red light goes out.| /
Low battery(earbuds)| Red light flashes once every 30s.| ‘Battery low’
Being charged (charging case)|
0%-30%: breathing (the first LED)30%-70%: always on (the first LED) + breathing (the second LED)More than 7055: always on(the first LED & the second one) + breathing (the third LED)Fully charged: all of the LEDs are on. Unplug: all of the LEDs go out.
| /
Low battery (charging case)| Lower than 10%: the first LED flashes slowly.| /
FAQs
-
The charging cases battery still has power, but why can’t the earphones be charged?
A. For the first time use, please confirm whether the insulation films of the earbuds are removed when using the earbuds.
B. Use a clean cotton cloth to wipe the charging contacts and pins (golden parts) of the earbuds and the charging case to ensure there is no residue that prevents the earbuds from being charged. (If there is sweat or any liquid on the charging contacts on the charging case and earbuds, they may be corroded. Please clean and dry before puning the earbuds into the charging case.) -
Why is there jamming when using the earbuds? Due to the characteristics of Bluetooth earbuds, other electromagnetic wave interference in the use environment may cause instantaneous disconnection and jamming.
Specifications
| Bluetooth Version | 5.2 |
|---|---|
| Support Protocol | HFP1.7, AVRCP1.6, A2DP1.3 |
| Working Range | 15m / 49.2ft (barrier-free) |
| Play Time (Varies by volume level and audio content) | Up to 8 hours (108 hours |
in total with the charging case)
Battery Capacity| 72mAh x2 (earbuds), 2600mAh (charging case)
Charging Time| 1.3 hours (earbuds), 3 hours (charging case)
Input Power| 5V = 2000mA
Driver Unit Size| +10mm x2
Frequency Range| 20Hz – 20KHz
Impedance| 3212
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and(2) this device must accept any interference received,
including interference that may cause undesired operation.
This device complies with CAN ICES-3 (B)/NMB-3(8).
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Tel.
US/CA: +1-886- 795.8560 Mon-Fri 9:00-17:00 (PST)
UK: +44 -121-7900609 Mon-Fri 8:00-17:00 (GMT)
DE: +4915735989502 Mon-Fri 9:00-18:00
Email: support@axloie.com
Model:ET8
FCC ID:2ATWG-ET8L
FCC ID:2ATWG-ET8R
FCC ID:2ATWG-ET8C IC:26891-AEA05
EC REP
Prolinx GmbH
Brehmstr. 56,40239 Duesseldorf Germany
Shenzhen Yuanggu Technology could.
No.101, Ist Factory Building, Hebei Industrial Park, Malang
Community, Hebeizbongxing Road, Bantian Sub-district, Longgang District,
Shenzhen, China
Made In China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>