AXLOIE 01 GOIN Wireless Earphones User Manual
- June 13, 2024
- axloie
Table of Contents
AXLOIE 01 GOIN Wireless Earphones
What’s in the Box
Product Overview
- Please tear off the insulating films attached the earphones and fully charge them before first use.
How to Pair
Binaural Mode
- Take out the earphones or press and hold the multi-function buttons(MFB) for 2 seconds to turn them on.
- Once paired automatically, the LED indicator of the main earphone will flash red and blue alternately; the indicator of the secondary earphone will be off. A voice prompt will say “Pairing”
- Select “AXLOIE Goin” on your phone to connect from the Bluetooth list. Once connected, the indicators will be off. A voice prompt will say “Connected”
Mono Mode
- Take out a single earphone or press and hold the MFB for 2 seconds to turn it on.
- Double-click the MFB, a voice prompt will say “Pairing”; the indicator will flash red and blue alternatively.
- Select “AXLOIE Goin” on your phone to connect from the Bluetooth list. Once connected, a voice prompt will say “Connected”
Mode Switch
- To switch to mono mode during the binaural mode, simply put either the right or left earphone into the charging case.
- To switch to binaural mode during the mono mode, simply open the charging case or take out the other earphone.
How to Reset
- Delete “AXLOIE Goin” in the Bluetooth list and turn off the Bluetooth function of your phone.
- Turn off the earphones, press and hold the MB for 10 seconds; the indicator will flash red and blue for 3 times at the same time.
- Put the earphones into the charging case and close the lid; now the reset is done.
- If it fails, repeat the above three steps.
How to Control
LED Status Indicators
Specifications
Contact Us
Email :support@axloie.com
- Technical Support
- Customer Service
Website :www.axloie.com
- Discount
- Extra Warranty of 6 month
- Online Chat
- E-mail CEO
Social media
@axloie
- Giveaway
- Coupon
- Event
FCC Conditions
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
EU Conformity Statement
This product and – if applicable – the supplied accessories too are marked
with “CE” and comply therefore with the applicable harmonized Europe- an
standards listed under the EMC Directive 2004/108/EC, the RoHS Directive
2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the European Union. For
proper recycling, return this product to your local supplier upon the purchase
of equivalent new equipment, or dispose of it at designated collection points.
For more information see: www.recycle– this.info.
www.axloie.com
Shenzhen Yuangu Technology Co., Ltd.
No. 101, 1st Factory Building, Hebei Industrial Park, Ma’antang Community.
Hebeizhongxing Road, Bantian Sub-district, Longgang District, Shenzhen
Prolinx GmbH Brehmstr. 56,40239, Duesseldorf, Germany
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>