AXLOIE ET11R Wireless Headphones User Guide

What’s in the Box

2 x Wireless Earbuds
1x Charging Case before
1x USB Type-C Cable
4x Pairs of Ear Tips (XS/S/M/L)
1x User Manual

Product Overview

Precautions

• Make sure the earbuds and Type-C port of the charging case are completely dry and clean before each charge.
• Please keep the earbuds dry and clean after each use.
• Please charge the charging case every 45 days at least to extend the battery life.
• For the first time use, please upgrade the firmware through the App first so as to enjoy the latest functions and services.
• If you meet any problems during use, please contact us through the after-sales service hotline or E-mail.

Wearing

• Choase the ear tips that best suits your ears.
• Place the ear hooks on the ears, and then insert the earbuds into the inner ear canals.
• Adjust the earbuds to the most comfortable position.

Charging

• Open or close the charging case to activate the LED battery indicators.
• Far the first time use, please tear off the insulation film on the charging pins of earbuds, and then fully charge the earbuds and the charging case.
• Please use the supplied Type-C cable to charge the charging case to prevent damage.
• Make sure the earbuds and Type-C port of the charging case are completely dry and clean before charging.

On/Off

Open the charging case and the earbuds will turn on automatically.
Put the earbuds back into the charging case and close the charging case, the earbuds will turn off automatically.
Status of LED Indicator (Earbud)

| On| White light is always on for 1s.
---|---|---
| Off| Red light is always on for 1s.

• If you want to turn on the earbuds manually, press and hold the lower multi-function buttons (MFB) on both earbuds for 2 seconds until the LED indicators of the earbuds display white light for 1 second.
• If you want to turn off the earbuds manually, press and hold the lower MFB on both earbuds for 5 seconds until the LED indicators of the earbuds display red light for 1 second. 5 seconds until the LED indicators of the earbuds display red light for 1 second.

Pairing

True Wireless Stereo Pairing:
Open the charging case and the right earbud will pair with the left earbud automatically.

Status of LED Indicator (Earbud)

| White light flashes rapidly.| TWS pairing is going on.
---|---|---
| White light goes out.| TWS pairing is done.

Connect to Bluetooth Device:

1. Open the charging case and wait for 1 to 3 seconds. When the LED indicator on one of the earbud flashes red and white alternately, it indicates that the earbuds have successfully entered the Bluetooth connection mode.
2. Turn on the Bluetooth function on your device, and then click “AXLOIE S6″
3.  Wait 3 to 5 seconds until a pop-up window appears, and then click “Pair” After the Bluetooth connection is successful, the indicators of the two earbuds go out.

Status of LED Indicator (Earbud)

| The LED indicator of the master earbud flashes red and white alternately and the secondary one flashes white light once every 3s.| Bluetooth connection is going on.
---|---|---
| The LED indicators of both earbuds go out.| Bluetooth connection is done.

The earbuds will automatically connect to your most recently connected device (if available) when you turn on the AXLOIE earbuds each time.
To pair with another Bluetooth device, open the charging case and make sure the earbuds are being charged, then press and hold the button on the charging case for 3 seconds until the
LED indicator on one of the earbuds flashes red and white alternately.

Control

2. In music playing or calling state, click the upper MFB on L (volume -), or click the upper MFB on R (volume +).

• For single earbud use, it is not allowed to adjust the volume through the MFB on earbuds.

LED Indicator

“Pairing”
Connected successfully| The LED indicators of both earbuds go out.| “Connected”
Being charged (earbuds)| Breathing red light| /
Fully charged (earbuds)| Red light goes out.| /
Low battery (earbuds)| Red light flashes once every 30s.| “Battery low”
Being charged (charging case)| Charged via the Type-C cable, 3 white LEDs first light up for is simultaneously and then display the battery level. 0%-30%: breathing (the first LED) 3096-70%: always on (the first LED) + breathing (the second LED) More than 70%: always on (the first LED & the second one) + breathing (the third LED)Fully charged: all of LEDs are on. Unplug: all of LEDs go out.| /
Low battery (charging case)| Lower than 10%: the first LED flashes slowly.| /

Heart Rate Monitor Function

Make sure the earbuds firmware is always up-to-date before use.
Download the AXLOIE App for heart rate monitoring, UI customization, EQ settings and earbuds firmware update.

• Heart rate monitoring: Provide continuous high-precision heart rate monitoring in real time in dynamic scenarios, including dynamic heart rate and RRI(R-to-R Interval) information.
• Ul customization: In stereo mode, all of the controls can be customized in the App. In mono mode, the controls are fixed.
• EQ setting: You can choose more than 20 EQ settings in the App to optimize your experience and enjoy different music genres.
• Earbuds firmware update: The earbuds firmware can be updated in the App. You will be informed once the new version af firmware is detected when you connect the earbuds with the App.

Reset

If there are any connection or function problems with the earbuds, you can try resetting the earbuds.

1. Put the earbuds in the charging case and make sure they are being charged.
2. Keep the charging case open, and then press and hold the button on the charging case for 10 seconds until the LED indicators on the earbuds flash red light 3 times, and then turn white. At this time, all memory data will be cleared.

FAQs

1. The charging case’s battery still has power, but why can’t the earphones be charged?
   A. For the first time use, please confirm whether the insulation films of the earbuds are removed when using the earbuds,
   B. Use a clean cotton cloth to wipe the charging contacts and pins (golden parts) of the earbuds and the charging case to ensure there is no residue that prevent the earbuds from being charged. (If there is sweat or any liquid on the charging contacts on the charging case and earbuds, they may be corroded, Please clean and dry before putting the earbuds into the charging case.)

2. Why is there a jamming when using the earbuds?
   Due to the characteristics of Bluetooth earbuds, other electromagnetic wave interference in the use environment may cause instantaneous disconnection and jamming.

Specifications

(32 hours in total with the charging case)
Battery Capacity| 52mAh x2 (earbuds), 600mAh (charging case)
Charging Time| 1.3 hours
Input Power| 5V = 550mA
Driver Unit Size| O1Omm x2
Frequency Range| 20Hz – 20KHz
Impedance| 16 Ω

FCC STATEMENT
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>