LeapFrog JNS_482949 Letter-Go-Round Educational Toy Instruction Manual

JNS_482949 Letter-Go-Round Educational Toy
Instruction Manual

This manual contains important information. Please keep it for future reference.

INTRODUCTION

Thank you for purchasing the Letter-Go-Round™!
Learning colors, counting, letters, and animal sounds have never been more fun! Tap the drum to count from 1-10 and learn about colors, or spin around the letter wheel to learn about animals from A to Z. Sit, spin, play, and learn!

INCLUDED IN THE PACKAGE

• Letter-Go-Round™
• Quick Start Guide

ASSEMBLY

1. Place both Panel Components A to Spinner Base, letter side up.
   

2. Attach the two Panel Components A to the Spinner Base, using five screws per panel.

3. Place both Panel Components B next to the Spinner Base, letter side up.
   

4. Attach the two Panel Components B to the Spinner Base, using five screws per panel.

5. Attach the Supporting Pillar to the Electronic Panel. You will hear a snap when the pieces are properly connected. These pieces cannot be taken apart after assembly.

6. Attach the Supporting Pillar to the Spinner Base. You will hear a snap when the pieces are properly connected. These pieces cannot be taken apart after assembly.

WARNING
All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords, and packaging screws are not part of this toy and should be discarded for your child’s safety.
NOTE
Please save this Instruction Manual as it contains important information.

Unlock the Packaging Locks

1. Rotate the packaging locks 90 degrees anticlockwise.
2. Pull out the packaging locks.

CAUTION:
This package contains small screws.
ADULT ASSEMBLY REQUIRED.
For your child’s safety, do not let your child play with the toy until it is fully assembled.

GETTING STARTED

BATTERY REMOVAL AND INSTALLATION

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the unit. Use a screwdriver to loosen the screw.
3. If used batteries are present, remove these batteries from the unit by pulling up on one end of each battery.
4. Install 2 new ‘AA’ (AM-3/LR6) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended).
5. Replace the battery cover and tighten the screw to secure.

WARNING:
Adult assembly is required for battery installation.
Keep batteries out of reach of children.

Disposal of batteries and product

The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicates they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains more than the specified value of mercury (Hg), cadmium (Cd) or lead (Pb) set out in Battery Directive (2006/66/EC).
The solid bar indicates that the product was placed on the market after 13th August 2005.
Help protect the environment by disposing of your product or batteries responsibly.

LeapFrog® cares for the planet.
Care for the environment and give your toy a second life by disposing of it at a small electrical collection point so all its materials can be recycled.
In the UK: Visit www.recyclenow.com to see a list of collection points near you.
In Australia & New Zealand:
Check with your local council for curbside collections.

IMPORTANT: BATTERY INFORMATION

• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.

RECHARGEABLE BATTERIES:

• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not charge non-rechargeable batteries.

PRODUCT FEATURES

1. On/Off/Volume Selector
   Slide the On/Off/Volume Selector to turn the toy on and select the volume.

2. Letter Wheel
   Sit on the Spinner Base and spin around the Letter Wheel while exploring 26letters and animals.

3. Colour LED Drum
   Tap the light-up color LED Drum button to hear learning phrases in different modes.

4. Mode Selector
   Move the Mode Selector to play in Letter mode, Colours & Counting mode, and Animal mode.

ACTIVITIES

Letter Mode
Sit on the Spinner Base and spin around the Letter Wheel and tap the Drum to hear letters and letter sounds.

Colors & Counting Mode
Sit on the Spinner Base and spin around the Letter Wheel to play a color game and tap the Drum to count from 1 to 10.

Animal Mode
Sit on the Spinner Base and spin around the Letter Wheel and tap the Drum to hear animal names and animal sounds.
Song Lyrics:
Letter Song
Here we go round the alphabet, alphabet, alphabet.
Here we go round the alphabet from A to Z.
Animal Song
Animals, animals all around Spin, spin yourself around and around
Colour Song
Red light, green light, give the wheel a spin!
Don’t stop, don’t stop, spin around again!
Let’s go!

CARE & MAINTENANCE

1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat sources.
3. Remove the batteries if the unit will not be in use for an extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
5. Try to change the batteries for new ones if the toy is not working properly.

CONSUMER SERVICES

Creating and developing LeapFrog® products is accompanied by a responsibility that we at LeapFrog® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department with any problems and/or suggestions that you might have. A service representative will be happy to help you.
UK Customers:
Phone: 01702 200244 (from UK) or +44 1702 200244 (outside UK)
Website: www.leapfrog.co.uk/support

Australian Customers:
Phone: 1800 862 155
Website: support.leapfrog.com.au

NZ Customers:
Phone: 0800 400 785
Website: support.leapfrog.com.au

Visit our website for more information about our products, downloads, resources, and more.www.leapfrog.com
Read our complete warranty policy online at leapfrog.com/legal

LeapFrog Enterprises, Inc.
A subsidiary of VTech Holdings Limited.
TM & © 2021 LeapFrog Enterprises, Inc.
All rights reserved.

Documents / Resources

| LeapFrog JNS_482949 Letter-Go-Round Educational Toy [pdf] Instruction Manual
JNS_482949, Letter-Go-Round, Educational Toy, JNS_482949 Letter-Go-Round Educational Toy, Toy
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>