EVERGREEN CLASSICS TG76P4C27P00 7.5-ft Holiday Symphony Pre-lit Traditional Artificial Christmas Tree Instructions

EVERGREEN CLASSICS TG76P4C27P00 7.5-ft Holiday Symphony Pre-lit

Traditional Artificial Christmas Tree

Use and Care Instructions

1.  Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
2.  When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
3.  When not in use, store neatly in a cool, dry location protected from sunlight.

Technical Specifications

• AC Adapter
• Input: AC 120 V- / 60 Hz, 0.83 A
• Output: DC 24 V, 2 A
• Controller: DC 24 V, 2 A

Physical Setup

Remote Control Instructions

Remove the insulation tab of the remote controller.

Key Functions

• Volume Up Press once to increase the volume by one level, a total of 10 levels can be adjusted.
• Volume Down Press once to decrease the volume by one level, a total of 10 levels can be adjusted.
• Play Press this button to play all 7 songs/light shows in sequence repeatedly. Once pressed, the sequence will always play from the start.
• Play Next Press this button to skip to the next song/light show when the light show is on.
• Color-Changing [RGB Lights) Press this button to select from the preset light colors/effects [1-3) or to turn off the lights.

Song List: 1.

• Carol of the Sugar Plums
•  Deck the Halls
•  Candela Teaser
•  Joy to The World/0 Come All Ye Faithful
•  We Wish You a Merry Jingle Bells
•  Russian Dance
•  Toys on the Housetop
• Random Light Colors/Effects
• [“Beautiful Movement”: Pre-programmed light effects cycle without music accompaniment)
•  Warm White Steady Glow
•  Warm White Twinkling
•  Multi-Color Steady Glow
•  Multi-Color Twinkling
•  off

This product may potentially trigger seizures for people with photosensitive epilepsy when using the motion effect light modes.

Aux Outlet

Songs can be played via an external speaker. simply connect the Music Controller Speaker to an external speaker with a 3.5 mm audio cable. Once connected to an external speaker, there will be no sound output from the controller speaker .

Battery Replacement

1.  Loosen the screw from the battery cover of the remote controller with a screwdriver (not included).
2.  Replace the used battery with a new CR2032 button cell battery (not included). Make sure that the battery is installed with the correct polarity[+ and-).
3. Retighten the screw to close and secure the battery cover.

WARNING

•  This product is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children. Ingestion of such batteries has been known to cause death.
•  This is a lithium battery which if swallowed has been known to cause death.
•  Small parts, keep batteries out of reach of children.
•  Do not expose the remote controller to moisture.
•  Dispose of used batteries properly (by following directions on batteries],and local laws and regulations regarding the disposal of hazardous waste.
•  Clean the battery contact surfaces prior to battery installation.
•  Remove batteries when not used for an extended period of time, or when depleted.
•  Use only CR2032 button cell battery for remote controller.
•  Do not dispose of batteries in fire – batteries may leak or rupture.

STORAGE INSTRUCTIONS

•  Unplug from power source, and detach plug from adapter. Remove all ornaments and decorations.
•  Disassemble the tree from top to bottom. Gently lift pole straight up to remove from the lower section, and fold all branches toward the pole.
•  Close the protective caps on the poles to avoid damaging the internal parts.
•  Place the disassembled tree into the shipping box and tape it shut.
• Store your tree in a cool, dry place away from sunlight. Exposure to excessive heat or humidity may damage your tree.

TROUBLESHOOTING TIPS

If Tree Does Not Illuminate / Some Bulbs Do Not Light or Flicker

•  Check to make sure that all plugs and adapter are properly connected as indicated.
•  Turn the poles gently to make sure pole-to-pole connection is secured.

Loose Hinge Pin

•  Place the branch into the hinge bracket.
•  Insert a new hinge pin all through the holes of bracket, and secure with a washer.

SPARE PARTS

This tree includes sets of hinge pins & washers.
If extra parts are needed, please contact our customer service center. www.polygroupstore.com or +1 888-919-0070.

Polygroup·
Polygroup• Trading LimitedUnit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive,Central, Hong Kong

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>