HyperX HX-HSCRS-GM-NA Cloud Revolver S Gaming Headset User Manual

HyperX HX-HSCRS-GM-NA Cloud Revolver S Gaming Headset User Manual

Introduction

HyperX™ Cloud Revolver S is primed for action with Plug N Play virtual Dolby® Surround 7.1 audio — no software required. Hear every footstep, explosion and gunshot with cinematic clarity as the simulated seven positional speakers provide precise sound with distance and depth. The advanced USB DSP sound card handles everything, delivering consistent premium-quality sound, no matter what system you’re playing on.

What’s included

• HyperX Cloud Revolver S Headset
• Detachable Microphone
• USB Audio Control Box

Features

• Plug N Play Dolby® Surround 7.1 audio technology
• Advanced USB Audio Control Box with DSP Sound Card
• Studio grade sound stage
• Signature HyperX memory foam
• Wide Headband for Maximum Comfort

Technical Specifications

Headphone

• Driver: Dynamic, 50mm with neodymium magnets
• Type: Circumaural, Closed back
• Frequency Response: 12Hz–28,000 Hz
• Impedance: 30 Ω
• Sound pressure level: 100.5dBSPL/mW at 1kHz
• T.H.D.: < 2%
• Input power: Rated 30mW, Maximum 500mW
• Weight: 360g
• Weight w/ mic: 376g
• Cable length: Headset (1m) USB Audio Control Box (2.2m)
• Connection: Headset – 3.5mm plug (4 pole) USB Audio Control Box – USB

Microphone

• Element: Electret condenser microphone
• Polar Pattern: Uni-directional, Noise-canceling
• Frequency Response: 50Hz-18,000 Hz
• Sensitivity: -40dBV (0dB=1V/Pa,1kHz)

Overview

A. Durable Steel Frame
B. Suspension headband
C. Detachable noise cancellation mic
D. Attached cable w/ 4 pole 3.5mm plug
E. USB Audio control box

USB Audio Control Box operation

The USB Audio Control Box has the following features:

• Dolby® Surround 7.1 audio technology
• 3 preset equalizer modes
• Microphone Mute
• Headphone volume adjustment
• Microphone volume adjustment

Usage with USB Audio Control Box (PC/Mac)

To use the headset to your computer, connect the headset’s 3.5mm plug to the female 3.5mm jack on the USB Audio Control Box, then plug the USB cable into your computer.

Using with USB Audio Control Box

Configuration with USB Audio Control Box (Windows)

For optimal surround sound performance configure Windows using the steps below.

1. Right-click the speaker icon in the task tray and select ‘Playback Devices’.

2. Right-click on ‘HyperX Cloud Revolver S’ and select ‘Set as Default Device’. Document No. 480HX-HSCRS001.A01 HyperX Cloud Revolver S Headset Page 9 of 19
   

3. With ‘HyperX Cloud Revolver S’ selected click on the ‘Configure’ button.
   

4. In the ‘Audio channels’ list select 7.1 Surround and click on ‘Next’.

5. In the ‘Optional speakers’ list make sure all boxes are checked then click ‘Next’.

6. In the ‘Full-range speakers’ list make sure all boxes are checked then click ‘Next’.

7. Click ‘Finish’ to save the settings.
   

8. Click on the ‘Recording’ tab, then right-click ‘HyperX Cloud Revolver S’ and select ‘Set as Default Device’.
   

Your HyperX Cloud Revolver S is now ready to use.

Configuration with USB Audio Control Box (Mac)

For optimal surround sound performance configure Mac using the steps below.

1. Click the Apple menu, then select ‘System Preferences’.
   

2. In ‘System Preferences’ click on ‘Sound’.

3. Select output then select ‘HyperX Cloud Revolver S’.

4. Select input then select ‘HyperX Cloud Revolver S’.

5. Open Finder then select Applications > Utilities > Audio MIDI Setup

6. Select ‘HyperX Cloud Revolver S’ then select Output.

7. Click the ‘Format’ drop down and select ‘8 ch 16-bit Integer 44.1 kHz’.

8. Click ‘Configure Speakers’.

9. Click the ‘Configuration’ drop down and select 7.1 Surround.

10. Click Apply.
    

Your HyperX Cloud Revolver S is now ready to use.

Usage (Xbox One™ & Xbox One S ™)

To use the headset with Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller

If your Xbox One™ controller does not have a 3.5mm jack you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox One™ controller (pictured below.)

Using with Xbox One™

Usage (PS4™ & PS4™ Pro) with USB Audio Control Box

To use the headset with PlayStation™ 4 (PS4™), connect the headset’s 3.5mm plug to the female 3.5mm jack on the USB audio control box, then plug the USB cable to the PS4™ USB port.

Once the ‘HyperX Cloud Revolver S’ device is detected configure the PS4™ Audio Devices using the steps below:

1. Turn on your PS4™ game console.
2. Navigate to the Settings Menu and select it.
3. Highlight the ‘Devices’ menu option and select it.
4. Scroll down to ‘Audio Devices’ and select it.
5. Set ‘Input Device’ to HyperX Cloud Revolver S.
6. Set ‘Output Device’ to HyperX Cloud Revolver S.
7. Choose ‘Output to Headphones’ and select ‘All Audio.’
   

Usage (PS4™ & PS4™ Pro) with direct 3.5mm connection

To use the headset with PlayStation™ 4 (PS4™), connect the 3.5mm plug on the headset directly to the PS4™ game controller and follow these steps:

1. Turn on your PS4™ game console.
2. Navigate to the Settings Menu and select it.
3. Highlight the ‘Devices’ menu option and select it.
4. Scroll down to ‘Audio Devices’ and select it.
5. Choose ‘Output to Headphones’ and select ‘All Audio.’
   

Usage (Wii U™)

To use the headset with Wii U  ™, connect the 3.5mm plug on the headset directly to the Wii U™ gamepad controller.

Usage (Mobile Device)

To use the headset with a mobile device (or other device) with a headset jack (4  pole CTIA), connect the 3.5mm plug directly into the headset jack on your device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>