BG ELECTRICAL CUEMS1-01 Main Switch Enclosure Instruction Manual
- June 11, 2024
- BG Electrical
Table of Contents
ELECTRICAL CUEMS1-01 Main Switch Enclosure
Instruction Manual
TECHNICAL HELPLINE: 03300 249 279
SAFETY WARNING
The connection and installation of electrical devices must be performed by a
skilled electrician only. Any intervention into or modification of the
appliance shall lead to the lapse of all warranty rights. Comply with your
national regulations and all relevant safety stipulations.
Use
fixing screws to secure the base to the surface, the switch can be removed by
pulling back the black clips on the bottom edge of the Main Switch.
Note: – fixing screws not provided. Prepare the incoming supply cable, a
maximum diameter of 35mmIcan be accepted by the terminals in the Main Switch.
Insert the cables into the terminals on the bottom edge of the Main Switch.
Ensure that they are fully inserted and the screws tightened to 2.5Nm of
torque.
Assemble the cover and secure to the base. For the first installation ensure
that the larger part of the cover is used on the incoming, power supply side.
A safety screw is provided which allows a wire / security deal to be
installed.
When installing the security seal, feed the wire through the head of the screw
and the boss on the cover.
BATCH CODE EXPLANATION
Wxx: Manufacturing date code; year of manufacturing (yy) and week of manufacturing (Wax)
Supplied by Luceco PLC Stafford Park 1
Telford TF3 3BD
ENGLAND
(EU) Luceco SE
C/ Bobinadora 1-5 08302 Mataró SPAIN
www.bgelectrical.uk