SVEN PS-600 Portable Speaker System with Bluetooth and FM-radio User Manual

SVEN PS-600 Portable Speaker System with Bluetooth and FM-radio

SPECIAL FEATURES

•  Bluetooth wireless signal transmission
•  Effective multi-colored lighting
• Wireless connection of two speakers to one source**
• Wired/wireless audio signal transmission
• Built-in audio files player from USB-flash and microSD card storage devices
•  Built-in equalizer
•  Microphone input with echo function
• Built-in FM tuner
•  LED display
•  Remote control (only in PS-655 model)

Speaker system description (Fig. 1.)

1.  MIC: 6.3 mm jack microphone jack

2. AUX: 3.5 mm mini-jack for audio signal connecting (phone, MP3 player, etc.)

3. TF CARD: micro SD card slot

4. Display

5. USB: USB-flash card slot

6. ON/OFF: POWER butto

7. DC 5V: micro USB jack for charger connecting, the USB port of laptop/PC

8. Indicator

9. 0-9: track number selection (in Player mode); Station number/frequency selection (in Radio mode)

10. MODE: switching modes button: Bluetooth/Radio/Player/LINE IN (short press); ON/OFF the service signals (long press)

11. LIGHT: switching backlight modes (short press); Turn off the backlight (long press)

12. DEL/TWS: FM station deletion (long press in Radio mode); Connecting an additional speaker (Bluetooth mode only)

13. EQ: EQ mode switch button (short press); Reset (long press)

14. FM+/ : next track (short pressing in Player and Bluetooth mode); Navigation on the track (long pressing in Player mode);
    Next track/station (in Radio mode)

15. AUTO SCAN/ : Play/Pause button (in Player and Bluetooth mode); Start/Stop auto scan (long pressing in Radio mode); Mute (short pressing in Radio mode

16. FM-/ : next track (short pressing in Player and Bluetooth mode); Navigation on the track (long pressing in Player mode); Next track/station (in Radio mode)

17. CH/ : button for switching between stations or frequency (in Radio mode); Save radio frequency (long pressing in Player mode (FR)); Disconnecting from the sound source (long pressing in Bluetooth mode); Repeat mode selection button (in the Player mode): ONE – repeats the current track; RAND – play tracks in the random order; ALL – plays all tracks in the sequential order

18. MIC VOL +/-: microphone volume control knob
    PS-655 only;
    Only for models with date of production from 04.2021.

19. ECHO +/-: microphone echo adjustment knob t

20. VOLUME+/-: volume control knob

Remote control (PS-655 only)

1.  MODE: switching modes button: Bluetooth/Radio/Player/LINE IN (short pressing); ON/OFF the service signals (long pressing)
2.  LIGHT (MUTE): switching backlight modes (short pressing); Mute (long pressing)
3.  REP: disconnect from the device (long pressing Bluetooth mode); repeat mode selection button (in Player mode) Save frequency in Radio (FR) mode)
4.  EQ: EQ mode switch button
5. VOL-/+: volume up/down
6.  CH-: previous track (in Player and Bluetooth mode); Rewind track in Player mode (long pressing); Previous station (in Radio mode)
7.  CH+: next track (in Player and Bluetooth mode); Rewind track in Player mode (long pressing); Next station (in Radio mode)
8.  AUTO SCAN: Play/Pause button (in Player and Bluetooth mode); Start/Stop auto scan (long pressing in Radio mode); Mute (short pressing in Radio and LINE IN mode)
9. FM-/+: frequency changeа (in Radio mode)
   0-9: numeric pad for entering track number (in Player mode) or number track/station in Radio mode

CONNECTION AND OPERATION

Attention! The built-in battery must be charged completely prior to the application.
Speaker system battery charging

• Connect speaker system to a USB port of PC or USB charger using USB type C to USB cable (included). During battery charging the indicator h is red. Indicator h goes out when the battery is charged.
• The battery is used in the speaker system as an integral part of the device, therefore do not try to extract or replace it, because this can result in the warranty cancellation or the device damage.

OPERATION MODES Bluetooth mode

•  Wireless data transfer via the Bluetooth protocol enables to the connection speaker system to compatible devices. The maximum radius of action of data transfer is 10 m. Such obstacles as walls or other electronic devices can interfere with signal transfer.
•  Turn on the speaker system Bluetooth mode – press button МODE j several times until display shows «bt» inscription.
• It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone, notebook, smartphone, etc.). «SVEN PS-600/650/655» massage will be displayed on the screen which is to be connected to*.
•  When the connection is successful, there will be a short beep and the indication of the search mode on the speaker system is over
•  You might have to enter the «0000» code to connect some models of devices via Bluetooth.
•  If the item has been already registered in the device list of a source, then the second search mode activation is not obligatory. Choose the item name «SVEN PS-600/650/655» and the «connect» command on the source.

**Portable Speaker System with Bluetooth and FM-radio

**

Radio mode

• To improve the reception quality of the radio signal, connect the 3.5 mm mini-jack cable (included) to the AUX input b or USB cable to USB type C (included) to DC 5V g input.
• Turn on the speaker system – press button МODE j several times until the display shows the station frequency. Long-term pressing button o activates auto search mode. After scanning completion, the first scanned radio station will start to operate automatically. With buttons p and n select a desired radio station.

Player mode
Attention! The file system of a micro SD carrier is FAT32. Maximum volume is 32 GB. It is not recommended to use the micro SD Ultra Speed.
The system will enter the Player mode automatically when a carrier (USB flash or SD card) is connected to corresponding ports. Use button o to switch between Play / Pause modes. You can control tracks by using buttons p (previous track) and n (next track).

The use in the wired mode

The Speaker system can be used as an external device for amplifying any audio source with a 3.5 mm output mini-jack. Connect a cable mini USB, plug 3.5 mini-jack to the audio input AUX b. Turn the speakers to the LINE mode – press the MODE button j several times until «LINE» appears on the display.

Reset
To reset the timbres and memorized radio stations: long press EQ m on display will appear «—-».

Connecting an additional speaker
(Only for models with date of production from 04.2021. )
For models PS-600/PS-650/PS-655 you can connect an additional speaker (Bluetooth mode only):

•  Turn both speakers into Bluetooth mode;
• Connect the signal source to one of the speakers via Bluetooth (the second column should be in search mode);
• On both speakers, press and hold button TWS l. On display d the inscription starts flashing TWS;
• If two speakers are successfully connected between themselves, the inscription TWS will glow constantly.

TECHNICAL SPECIFICATIONS

Notes:

• Technical specifications given in this table are supplemental information and cannot give occasion to claims.
• Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.

Technical support is on www.sven.fi.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>