Shenzhen Rti Tek AYLAIQ10 Serial-to-Wireless Device Server Instruction Manual

June 6, 2024
Shenzhen Rti Tek

AylaIQ: Diagnostic Plug-in Solution for IoT
Put Your Deployed Devices in the IoT Game

AylaIQ is a turnkey solution tailored for both product manufacturers and service enterprises to realize rapid time to IoT value. The solution, which comes in a simple and easy o deploy dongle form integrated with a cloud service and dashboard application, is designed for the ubiquitous RS-232/RS-485 serial port communication standard that is common across various types of residential and commercial equipment.
AylaIQ has a variety of applications in commercial / industry verticals that are capital intensive with fixed assets such as:

  • Building management – with HVAC, water management, and security systems
  • Commercial / Industrial automation – Equipment and production environment asset
  • Connected home monitoring – home appliances and smart services

Shenzhen Rti Tek AYLAIQ10 Serial-to-Wireless Device Server -
Benefits

Benefits

  • Rapid time to business value with low configuration effort
  • High visibility into device usage and performance to understand operational patterns
  • Extend the lifecycle of existing assets through timely maintenance  decisions
  • Optimized services through truck roll reduction

General Specification

Wi-Fi Specification

Antenna Specification

User Operations

Power On/Off Press  button once
Reset Press the button and hold for 10 seconds
System LED Solid Green => Power On

Green Blinking => System Self Test Red On => System Error
LED off => Power Off
Wi-Fi LED| Solid Green => Link Successful
Green Blinking => Data Traffic TX/RX LED Off => No Activity
RS-485 LED| Solid Green => Link Successfully Green Blinking => Data Traffic TX/RX
LED Off => No Activity

Mounting and Installation Steps

  1. Before mounting AylaIQ to your Device, ensure that your device is disconnected from the power source.
  2. Use an appropriate harness to fix AylaIQ to your device.
  3. Connect the RJ45 connector from your device to the slot provided in AylaIQ.
  4. Insert the power adapter’s pin to the appropriate slot in AylaIQ.
  5. Reconnect your device to a power source.
  6. Connect the power adapter of AylaIQ to a power source. The System LED of AylaIQ should turn green.
  7. Using the AylaIQ mobile app, connect your AylaIQ device to Wi-Fi and complete the onboarding process.
  8. Once AylaIQ is successfully connected to Wi-FI, the Wi-Fi LED would turn green. This LED will start blinking in green while data is being transferred.

Dimensions (in mm)

Shenzhen Rti Tek AYLAIQ10 Serial-to-Wireless Device Server -
Dimensions

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator & your body.

FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE 3: Ayla Networks has only provided software for connectivity of hardware and is not the party responsible for compliance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals