MAGTEK 30056084 DynaPro Emv Pinpad USB Enet Installation Guide
- June 6, 2024
- MAGTEK
Table of Contents
DynaPro and DynaPro v3
NOTICE: DynaPro and DynaPro v3 reached PCI sunset on April 30, 2021.
Secure PIN Pad/Keypad
Quick Installation Guide
Use and Compliance
CAUTION : MAGTEK recommends plugging the unit in as soon as possible or
within one year, to maximize operation.
PLEASE HANDLE DEVICE WITH CARE. Subjecting the device to temperature extremes
(outside of 14°F to 140 °F (-10 °C to 60°C)) can adversely affect the device’s
battery life and tamper security switches, which can render the device
inoperable and void the warranty. MagTek recommends plugging the unit in as
soon as possible or within one year, to maximize operation.
Prevent card data breaches without compromising the speed and convenience of your cardholders’ financial transactions with DynaPro and DynaPro v3. DynaPro and DynaPro v3 are secure cryptographic devices for PIN and data entry. They protect cardholder data whether it is read using the MagneSafe® Secure Card Reader Authenticator (SCRA), contact, or contactless chip card reader. The DynaPro family of products is one of the most comprehensive, end-to-end security solutions available.
System Requirements
Windows 7 or later (32-bit or 64-bit), Microsoft .NET Framework version 2.0 (not required but suggested), USB port or Ethernet port. Power source within 6’ if using contactless functions or Ethernet.
Use and Operation
During normal operation, the operator selects the type of transaction from the PMS/POS terminal software. Data is entered on the DynaPro/DynaPro v3 keypad in response to the prompts on the device display.
Options
Privacy Shield: To install the privacy shield, hold the smaller end
firmly against the privacy shield clip holes that are above the chip card
insertion slot. Then pivot the larger end down and press it onto the device
until you feel a click.
Optional Stylus: Stylus with USB and Stylus with Ethernet
NFC Capabilities: DynaPro/ DynaPro v3 offers an optional contactless card
reader. Tap contactless cards on the device’s display.
DynaPro v3 PN| DynaPro V1 PN| DynaPro Description| Cable|
Capture| NFC
---|---|---|---|---|---
30056082| 30056001| PCI, NO CTLESS, NO SIGCAP, BLACK, USB 6FT| USB| NO| NO
30056085| 30056002| TST, NO CTLESS, NO SIGCAP, BLACK, USB 6FT| USB| NO| NO
30056083| 30056003| PCI, NO CTLESS, SIGNATURE CAPTURE, BLACK, USB 6FT| USB|
YES| NO
30056086| 30056004| TST, NO CTLESS, SIGNATURE CAPTURE, BLACK, USB 6FT| USB|
YES| NO
30056070| 30056013| PCI, CONTACTLESS, NO SIGCAP, BLACK, USB 6FT| USB| NO| YES
30056071| 30056014| TST, CONTACTLESS, NO SIGCAP, BLACK, USB 6FT| USB| NO| YES
30056072| 30056028| PCI, CONTACTLESS, SIGNATURE CAPTURE, BLACK, USB 6FT| USB|
YES| YES
30056073| 30056029| TST, CONTACTLESS, SIGNATURE CAPTURE, BLACK, USB 6FT| USB|
YES| YES
30056092| —| PCI, NO LESS, NO SIGCAP, BLACK, USB 6FT, QWICKCARDS| USB| NO| NO
30056084| 30056005| PCI, NO LESS, NO SIGCAP, BLACK, ETHERNET 6FT| ETHERNET|
NO| NO
30056094| —| TST, CONTACTLESS, NO SIGCAP, BLACK, ETHERNET 6FT| ETHERNET| NO|
YES
30056087| 30056006| TST, NO LESS, NO SIGCAP, BLACK, ETHERNET 6.75FT| ETHERNET|
NO| NO
0| 30056007| PCI, NO LESS, SIGNATURE CAPTURE, BLACK, ETHERNET 6.75FT|
ETHERNET| YES| NO
0| 30056008| TST, NO CTLESS, SIGNATURE CAPTURE, BLACK, ETHERNET 6.75FT|
ETHERNET| YES| NO
30056074| 30056030| PCI, CONTACTLESS, SIGNATURE CAPTURE, BLACK, ETHERNET
6.75FT| ETHERNET| YES| YES
30056075| 30056031| TST, CONTACTLESS, SIGNATURE CAPTURE, BLACK, ETHERNET
6.75FT| ETHERNET| YES| YES
Legal Terms and Conditions
PCI SSC’s approval applies only to PEDs that are identical to the PED tested by a PCI Security Standards Council recognized laboratory. If any aspect of the PED is different from that which was tested by the laboratory—even if the PED conforms to the basic product description contained in the letter—then the PED model should not be considered approved, nor promoted as approved. For example, if a PED contains firmware, software, or physical construction that has the same name or model number as those tested by the laboratory, but in fact is not identical to those PED samples tested by the laboratory, then the PED should not be considered or promoted as approved. | No vendor or third party may refer to a PED as “PCI Approved,” nor otherwise state or imply that PCI SSC has, in whole or part, approved any aspect of a vendor or its PEDs, except to the extent and subject to the terms and restrictions expressly set forth in a written agreement with PCI SSC, or in an approval letter. All other references to PCI SSC’s approval are strictly and actively prohibited by PCI SSC. | When granted, approval is provided by PCI SSC to ensure certain security and operational characteristics important to the achievement of PCI SSC’s goals, but the approval does not under any circumstances include any endorsement or warranty regarding the functionality, quality, or performance of any particular product or service. PCI SSC does not warrant any products or services provided by third parties. Approval does not, under any circumstances, include or imply any product warranties from PCI SSC, including, without limitation, any implied warranties of merchantability, fitness for purpose or non-infringement, all of which are expressly disclaimed by PCI SSC. All rights and remedies regarding products and services, which have received approval, shall be provided by the third party providing such products or services, and not by PCI SSC or the payment brand participants.
Connection
USB Connection (Figure 1)
USB Power Requirements
DynaPro/DynaPro v3 with USB connection requires an external power supply when
NFC capabilities are present.
Connecting via USB
DynaPro/DynaPro v3 USB devices need to be connected to the USB port of the
PMS/POS terminal being used. The USB cable included with the device has a
junction box approximately two feet from the end for an AC adapter.
Plug the AC adapter cable into the junction box. Plug the other end of the AC
adapter into the nearest available power outlet. Plug the USB end of the cable
into an available USB port of the associated PMS/POS terminal being used.
Verify Connection and Power
After the AC adapter is plugged in, DynaPro/DynaPro v3 powers on.
Initialization takes approximately 30 seconds. “Welcome” appears on the
display screen when ready. Contact MagTek support if the “Welcome” screen does
not appear. The PMS/POS host software automatically detects the device.
Ethernet Connection (Figure 2)
Ethernet Connection Requirements
DynaPro/DynaPro v3 with Ethernet connection requires an external power supply.
Connecting via Ethernet
The device comes with Ethernet cable part number 30019327. The Ethernet cable
included with the device has a junction box approximately two feet from the
end for an AC adapter. Plug the AC adapter cable into the junction box. Plug
the Ethernet cable into the nearest available network port.
Plug the other end of the AC adapter into the nearest available power outlet.
Verify Connection and Power
After the AC adapter is plugged in, DynaPro powers on. Initialization takes
approximately 30 seconds. “Welcome” appears on the display screen when ready.
Contact MagTek support if the “Welcome” screen does not appear.
Check with your host software provider for specific user functionality and
network connectivity validation.
WARNING Connecting or disconnecting the USB cable from the backside of the DynaPro when the PMS/POS terminal is ON may clear the encryption keys.
NOTICE: DynaPro/DynaPro v3 may be used as PIN Pads devices after sunset as long as they are replacement devices and/or shipped from the manufacturer before April 30, 2021. DynaPro/DynaPro v3 may be used as new or replacement secure keypad devices as long as they are not being used for PIN entry nor in a P2PE environment.
MagTek® Inc., 1710 Apollo Court, Seal Beach CA 90740 | p
562-546-6400 | support
651-415-6800 | f
562-546-6301 |
www.magtek.com
Please note that the use of this accessory with an Apple product may affect
wireless performance. Apple®, Apple Pay®, OS X®, iPhone®, iPad®, iPad Air®,
iPad Pro®, Lightning®, and Mac® are trademarks of Apple Inc., registered in
the U.S. and other countries.
EMV® is a registered trademark in the U.S. and other countries and an
unregistered trademark elsewhere. The EMV trademark is owned by EMVCo, LLC.
The Contactless Indicator mark, consisting of four graduating arcs, is a
trademark owned by and used with permission of EMVCo, LLC. MagTek®,
MagnePrint®, and MagneSafe® are registered trademarks of MagTek, Inc.
MAGTEK: Registered to ISO 9001:2015 © Copyright 2021 MagTek, Inc. PN D99875265
rev 110 4/21