MyCableMart FE-ADT-345P Ethernet Splitter 1 to 2 for 2 Devices to Concurrent Network Pair User Manual
- June 6, 2024
- MyCableMart
Table of Contents
MyCableMart FE-ADT-345P Ethernet Splitter 1 to 2 for 2 Devices to
Concurrent Network Pair
WARNING: The product, when used as directed, can allow for the use of a
SINGLE ethernet cable to provide concurrent connectivity to two devices (such
as 2 computers). This product is sold as a PAIR (2 units) and the pair MUST be
used together and as directed to achieve the capabilities of providing 2
concurrent networked devices on your network.
This product is sold as a PAIR (2 splitters) that MUST be used together. ONE
splitter device (#1) is connected to a router (or networking switch) using TWO
RJ45 ports. A SINGLE ethernet cable is then connected from splitter (#1) to
the second splitter (#2). 2 concurrent network ports are then available at
splitter #2.
2 example usages are diagrammed below. BOTH ports MUST be connected to the router (or networking switch) to Splitter #1 for this connectivity to work properly:
Connection Example 1
Connection Example 2
Dimension
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>