MyCableMart ZT-T-505A 3D Full HD 1080P HDMI Extender Over Single CAT5e-6 With IR (60M) User Manual
- June 6, 2024
- MyCableMart
Table of Contents
ZT-T-505A 3D Full HD 1080P HDMI Extender Over Single CAT5e-6 With IR (60M)
User Manual
Bring High-Definition to your life!
3D Full HD 1080P HDMI Extender Over Single CAT5e/6 With IR (60M)
Thank you for purchasing our product. To ensure the safety and many years of trouble-free operation of this product, please read the manual carefully before using this product.
INTRODUCTION
The HDMI to RJ45 Extender uses a single cat-5e or cat-6 (recommended) cables up to 60 meters instead of HDMI cable to transmit high definition signal, helping reduce costs. Long-distance transmission of high definition is very difficult because HDMI cable is very expensive. The Extender is designed to supply long-distance transmission of high-definition signals.
FEATURES
-
Signal transmission: CAT5e or CAT6(recommended) cables up to 60 meters instead of HDMI cables are connected between TX and RX Extender.
-
Support HDMI1.3,HDCP 1.2 protocol compliant.
-
Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i.
-
Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i.
-
Support CEC.
-
Support 20~60KHz IR working.
-
Audio format support :
DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD. -
No loss of quality.
-
Installs in minutes.
-
Needs DC5V/1A power supply (included).
PACKAGING ACCESSORIES:
When first unpacking your extender please check to see if the following items are included:
1. HDMI Transmitter——————1 PC
2. HDMI Receiver———————1 PC
3. IR-TX ———————————1 PC
4. IR-RX ———————————1 PC
5. Power supply————————2 PC
6. User manual————————-1 PC
SPECIFICATION
Length of CAT-6 cable between Transmitter and Receiver—————————————–Up to 60
meters
HDMI Input——————————————————–24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format input —————————–DTS-HD/Dolby-TrueHD/LPCM7.1/DTS/Dolby-
AC3/DSD
HDMI Output——————————————————24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format output———————————————————–LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth———————————————————————————————————-165MHz
Max baud rate———————————————————————————————————-4.95Gbps
Input Video signal ——————————————————————————————-0.5~1.5Volts p-p
Output DDC signal—————————————————————————————–5Volts p-p (TT1L)
Input/Output HDMI cable distance——————————————- ≤20m AWG26 HDMI standard cable
Max working current—————————————————————————————————-800mA
Power adapter format ———————————–Input: AC (50HZ, 60HZ) 100V-240V; Output:
DC5V/1A
Operating Temperature Range—————————————————————————— (-15 to +55 ℃)
Operating Humidity range————————————————————5 to 90%RH (No Condensation)
PANEL DESCRIPTIONS
Please study the panel drawings below and become familiar with the signal inputs, outputs, and power requirements.
DC/5V——————————————-Power Input
Power—————————————Power Indicator
HDMI Input ——————————-HDMI Input port
IR-TX —————————————–IR transmitter
CAT5e/6 Out —————————–CAT5e/6 output
EDID ————————————-EDID copy button
IR-RX ———————————————IR receiver
CAT5e/6 In ———————————CAT5e/6 Input
DC/5V——————————————-Power Input
Power—————————————Power Indicator
HDMI Output —————————HDMI output port
CONNECT AND OPERATE
Before installation, please make sure all devices you wish to connect have been turned off.
Connect HDMI signal source to the transmitter of HDMI extender.
Use LAN cable (Recommend: CAT 6) to connect transmitter and receiver of HDMI
Extender.
Connect the display equipment with an HDMI connector to the receiver of the
HDMI extender.
Power on all connected devices, Choose the input of the display device to its
HDMI channel.
The method of EDID copy of display terminal:
Connect the HDMI input port of the HDMI extender transmitter to the TV with
the power adapter, and press the EDID button on the transmitter for 1-3
seconds to complete the EDID copy.
INSTALLATION AND PRECAUTIONS
To avoid electric shock, product damage and to protect your safety, please note the following:
- Please slowly plug or unplug signal cables and do not repeatedly plug and unplug.
- The equipment should not be placed under direct sunlight, damp areas, or an unventilated environment.
- Liquids should not be placed on the equipment.
- Do not install the equipment near heat sources such as fire, power, or other amplifiers that produce heat.
- Do not insert the metal or other objects into the equipment in addition to connecting cables to ports.
- Dispose of electronics properly based on local disposal regulations