zokop SH-36 Oil Filled Radiator Heater Owner’s Manual

zokop SH-36 Oil Filled Radiator Heater Owner’s Manual

Thanks for your purchase. Any questions please don’t hesitate to contact us, We will handle all your problem ASAP. Your feedback is vital to us ! And we will always try to do better. For more details, please contact us by email via support@rovsun.com. (Write your seller’s Order # on the subject of the email, so that we can find your order and better assist your issue) Or call us at (1)855-882-2333 .

WARNING
Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in fire, electric shock, or serious personal injury.
CAUTION
Keep this owner’s manual for future reference.

Thank you for choosing our Product. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product.Thoroughly read the instructions and familiarize yourself with all the operational aspects of your new product.

IMPORTANT INSTRUCTIONS

When using this electric unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Read ALL instructions before using this unit.
2. CAUTION: Risk of Electric Shock. DO NOT open or try to repair the heater yourself.
3. This heater may get hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If provided, use handle(s) when moving this heater. DO NOT place it against walls, furniture, curtains, etc.
4. Keep combustible materials, such as furniture, pillows, bedding, paper, clothes, and curtains at least 3 ft from the front of the heater and keep them away from the sides, top, and rear. DO NOT place towels or other objects on the heater.
5. Extreme caution is necessary when any heater is used.
6. DO NOT operate any heater with a damaged cord or after the heater malfunctions, has been dropped or dam-aged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
7. This heater is not intended for use in bathrooms, laundry areas, showers or swimming pools and similar locations. NEVER locate heater where it may fall into a bathtub or other water container. To protect against electrical hazards, DO NOT immerse in water or other liquids.
8. DO NOT touch the control panel or plug with a wet hand.
9. DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
10. DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
11. To prevent a possible fire, DO NOT block the air intakes or exhaust in any manner. DO NOT use on soft surfaces, like a bed, where openings may become blocked.
12. A heater has hot and arcing or sparking parts inside. DO NOT use in areas where gasoline, paint, explosive and/or flammable liquids are used or stored. Keep unit away from heated surfaces and open flames.
13. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
14. To avoid fire or shock hazard, plug the unit directly into a 120 V AC electrical outlet.
15. To disconnect heater, turn controls to OFF, then remove plug from outlet. Pull firmly on the plug, DO NOT unplug by pulling on the cord.
16. Always unplug the unit before moving or cleaning, or whenever the heater is not in use.
17. Use only for intended household use as described in this manual. Any other use not recommended by the manufac-turer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by unauthorized dealers may cause hazards.
18. Always use on a dry, level surface. Use on floor only.
19. DO NOT use outdoors.
20. WARNING: To reduce the risk of fire or electric shock, DO NOT use this unit with any solid-state speed control device.
21. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user service-able parts.
22. Always use the product in an upright position.

SAFETY FEATURES

Tip-Over Safety Feature
This heater is equipped with a shut-off safety feature. Once the heater is tipped over, an internal switch will automatically shut the heater off. Once the heater is restored to an upright position, the heater will reset. To continue operation, press the power button on the control panel.
Overheat Safety Feature
This heater is equipped with an overheat safety feature. When the heater’s internal components reach a certain temperature that could cause overheating and possible fire, the heater will automatically shut off.

WARNING
It is normal for the power cord to feel warm to the touch; however, a loose fit between the outlet and the plug may cause overheating of the plug. If this occurs, try inserting the plug into a different outlet. Contact a qualified electrician to inspect the original outlet for damage.

IN THE BOX

PRODUCT DIAGRAM

INSTRUCTIONS FOR ASSEMBLY

1. Turn the heater (A) upside down. Remove the Butterfly Nuts from the bolts (B). Then insert the bolts (B) in “U” direction into the heater (A).

2. Use the Butterfly Nuts (E) removed from Step 1 to secure both pedals (D) to the bolts (B).

3. Remove the Nuts (C) preassembled to the Casters (F). Insert the top of Casters into the holes on the Pedals (D). Use the removed Nuts to secure the Casters to the Nuts.

4. Turn the assembled unit upright. Ensure the Casters are installed correctly and level.

Place the heater only on a flat, stable surface. Placing the heater on an incline can cause damage to the heater and lead to hazardous situations.

WARNING
DO NOT open or refill/change oil fins. Oil fins are permanently sealed and DO NOT require refilling or oil changing. Attempting to open fins will damage the unit. This unit is filled with a non-toxic mineral oil.

CONTROL PANEL BUTTON/DISPLAY

| ON/OFF| Turns the heater ON or OFF.

| Mode| Selects between High, Low and Fan modes.

| Temp Up| Increases desired temperature.

|  Temp Down| Decreases desired temperature.

| Timer| Sets hour value for the timer.

| Low Mode Indicator| Lit when Low Heat mode is engaged.

| Medium Mode Indicator| Lit when Medium Heat mode is engaged.

| High Mode Indicator| Lit when High Heat mode is engaged.

| Fahrenheit Indicator| Lit when temperature displayed is in Fahrenheit.

| Digital Display| Indicates set room temperature or time.

| Timer Indicator| Lit when the Timer mode is engaged.

INSTRCTIONS FOR USE

1. Place the product on a firm, level surface.
2. With the power in the OFF position, plug the unit directly into a 120 V AC electrical outlet.

STARTING UNIT AND SELECTING HEAT MODE

Heat Modes

High| | High Heat Mode uses 1500W
Medium|

| Medium Mode uses 900W
Low|

| Low Heat Mode uses 600W

NOTICE
When the heat function is used for the first time, a slight odor may be present. This is normal and should not occur again unless the heater is not used for an extended period of time.
NOTICE
It is normal for the heater to cycle ON and OFF as it maintains the preset temperature. To prevent the unit from cycling, you need to change the thermostat setting.

SELECTING DESIRED TEMPERATURE

NOTE: Once you have chosen the desired temperature, the heater will remain on until room temperature increases to the sot temperature on the LED display. The heater will cycle ON and OFF to maintain set room temperature.

SETTING POWER OFF TIMER FUNCTION

NOTICE

The Power OFF Timer function will allow for the heater to power OFF after a certain set time, and can only be set while the heater is in the ON mode.

1. Turn the heater ON.
2. Press the Timer button.

| LED display changes from the °temperature” to the “hours” option for the timer. Hour options for the timer are 0 to 12 hours (in 1 hour increments).

3. Continue to press the timer button to change the number of hours the heater will run before powering itself OFF.

MAINTENANCE

1. Turn the POWER OFF.
2. Unplug the unit and let it cool completely.
3. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. A mild detergent can be used if necessary.
4. After cleaning, dry the unit with a soft cloth.
5. Wait until the unit is completely dry before use.

WARNING

• DO NOT let liquid enter the heater.
• DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater.
• DO NOT immerse the heater in water.

STORAGE

Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original packaging to repack the unit.

TROUBLESHOOTING

If the heater will not operate, please check the following:

1. Check if the power cord is plugged into an electrical outlet. If not, plug in unit to appropriate outlet.
2. Check if electricity to the outlet is working
3. Ensure power is turned to ON position.
4. Make sure heater is placed on a flat solid surface.
5. See SAFETY FEATURES section for additional information.

NOTICE: The product is equipped with an overheat safety feature protector which will switch off the heater in case of accidental over heating (ex. Obstruction of air intake and outlet grills).

NOTICE : The product is equipped with tip-over switch inside. When the product tips over abnormally during its use, it can cut off power automatically.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>