zokop 850-Watt 8 oz. Red Countertop Popcorn Machine User Manual
- June 6, 2024
- zokop
Table of Contents
zokop 850-Watt 8 oz. Red Countertop Popcorn Machine
INTRODUCTION
Thank you for purchasing this 8OZ RETRO POPCORN MACHINE! This popper will be the hit of every party, home movie theatres, little League, varsity games, businesses, etc. Convenient 3 switches operation Includes a light warmer, stirrer, and pot heater. The RETRO POPCORN MACHINE features a large, stainless steel kettle with a built-in stirring system, providing hot, fresh, kettle- cooked popcorn per batch. The machine includes a drawer to keep un-popped kernels out of each perfect batch and a warm system to keep popcorn fresh and delicious. The popper has an easy-to-clean design and an accessible connection system to combine with a moveable cart.
SAFETY
Your safety and the safety of others are very important. We have provided
many important safety guides in this user manual and on the equipment. Always
read and obey all safety guides. This is the safety alert symbol. This symbol
alerts you to potential hazards that can kill or hurt you and others. All
safety guides will follow the safety alert symbol. All safety guides will tell
you what the potential hazard is and how to reduce the chance of injury, and
tell you what can happen if the safety guides are not followed.
IMPORTANT PRECAUTIONS
- NEVER immerse any part of this equipment in the water.
- NEVER use near water, gas, or electric burner.
- NEVER place objects in contact with heated surfaces.
- NEVER use an abrasive sponge or cloth.
- NEVER use a scouring pad on the appliance.
- NEVER leave the appliance unattended while in use.
- ALWAYS unplug the equipment when not in use, and during cleaning or servicing.
- DO NOT operate this appliance with a damaged cord or plug, nor if the appliance ever malfunctions.
- This appliance is NOT A TOY. Keep out of reach of children.
- Unsupervised young children and cognitively challenged individuals should never operate this appliance.
IMPORTANT SAFETY GUIDES
- Read all instructions before operating this appliance.
- The machine must be properly grounded to prevent electrical shock to personnel, failure to do so could result in serious injury.
- DO NOT touch the kettle or any heated surface, Touching directly will result in burns.
- ALWAYS use the handle to operate.
- ALWAYS keep the door of Main Unit closed while operating.
- Keep cord and plug off the ground and away from moisture.
- DO NOT operate any appliance with a damaged cord or plug, nor if the appliance has been damaged in any manner.
- Always unplug the equipment before cleaning or servicing.
- Make sure all mechanical switches are in the OFF position before plugging the equipment into the receptacle.
- DO NOT operate the equipment without oil as corn may burn or smoke.
- DO NOT move the equipment during operation.
- Extreme caution must be used when moving this appliance.
- DO NOT leave Kettle motor running once popping has ceased.
- The equipment must be properly assembled before use.
- Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death.
- This appliance is intended for residential or personal use only, any alterations to this equipment will void the warranty and may cause a dangerous condition.
- Do not attempt to service this appliance yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
POPCORN MACHINE PARTS:
- Main Unit x1
- Door x2
- Kettle x1
- Popcorn scoop x1
- Corn measuring cup x1
- Oil measuring cup x1
- Popcorn cup x3
- Powder shaker x1
- Corner cap x4
ASSEMBLY OF THE MAIN UNIT
- Remove all packaging and take out the parcel which was stored in the Main unit (A), find Glass doors (B), and insert pins into hinges. meanwhile, put the four triangular caps (I) onto the corner of top plate. Note: Always place the equipment on a sturdy & level base.
- Put the Kettle (C) onto hangers located in the Main Unit (A), slip hanger bars into slots on hangers. Make sure gears properly mesh together.
- Plug the Kettle (C) into the outlet located on the ceiling of Main unit (A). CAUTION: Before plugging, make sure all switches are in the OFF position.
- The assembly of the Main unit finished. MAKE SURE the Kettle is seated well and all parts are well assembled.
HOW TO OPERATE
WARMER SWITCH: Supplies power to the interior cabinet light and warming element in the bottom tray. STIRRER SWITCH: Supplies power to the agitator motor, operates the stirrer inside the kettle. Be sure gears on the kettle and motor are properly meshed together before starting. POT HEATER SWITCH: supplies power to the heating element in the kettle. Kettle gets very hot, ALWAYS use the handle to operate. Before first use, clean the inside of the unit by wiping with a moist, non-abrasive sponge, towel, or cloth and then wiping with a non-abrasive dry towel. Wipe down the inside of the Kettle and be sure it is properly placed in the brackets before starting.
- Place the equipment on a flat surface near an electrical outlet. Make sure the cord is away from any water source.
- Gather your popcorn-making supplies: popcorn, seasonings, bowls or bags for holding the popcorn, cooking oil, Kernel Measuring Cup, and Oil Measuring Spoon. (Kernel Measuring Cup and Oil Measuring Spoon are included with your unit).
- Make sure Kettle is properly secured in support brackets.
- Make sure the Kettle motor is plugged in.
- Plugin the appliance while the switch is flipped to the OFF position.
- Switch on the WARMER and POT HEATER, add oil (8 TBSP of oil for every 1 CUP of popcorn kernels), let heat for 3 to 4 minutes.
- Once oil is heated, turn on the STIRRER switch and add popcorn kernels. Close the door. Always keep the door closed while operating.
- Do not exceed (2)1/2 CUPS of popcorn kernels per batch (1 CUP total).
- Once the popping has completed, turn OFF the carefully dump all popcorn from the kettle.
CLEANING & MAINTENANCE
- Turn all switches to the OFF position.
- Unplug the outer plug to the outlet.
- Allow kettle to cool at least 1 hour before cleaning. DO NOT use ice or water to cool down a hot kettle!
- After cooling, unplug the kettle motor plug and remove the kettle from the main unit.
- Fill ²⁄ ³ of Kettle with hot, soapy water and let sit for 15 – 20 minutes to cut the grease. (Time may vary – use your own judgment depending on the amount of cleaning necessary.)
- Empty water. If necessary, use the scrubber side of a cleaning sponge to scrub inside of Kettle.
- Wipe the inside of the kettle with a clean, soft cloth. DO NOT use an oven or abrasive cleaners as they will damage the kettle.
- clean the inside & outside of the main unit by wiping with a clean, soft, moist cloth.
CAUTION:
- ALWAYS UNPLUG the equipment before cleaning or servicing.
- DO NOT use ice or water to cool down a hot kettle!
- DO NOT use the oven or abrasive cleaners as they will damage the kettle.
- DO NOT immerse any part of this equipment in the water.
CUSTOMER SERVICE
www.rovsun.com Phone service: (1) 855-882-2333 E-mail Service: Support@rovsun.com (Working Day: MON-FRI 11:00AM-5:00PM ET)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>