zokop ALW-Q16 Commercial Blender User Guide

: June 6, 2024
: zokop

Table of Contents

on the subject of the email, so that we can find your order and better

ALW-Q16 Commercial Blender
User Guide

zokop ALW Q16 Commercial Blender

Thanks for your purchase. Any questions please don’t hesitate to contact us. We will handle all your problems ASAP. Your feedback is vital to us! And we will always try to do better. For more details, please contact us by email via your seller’s order [email protected]

on the subject of the email, so that we can find your order and better

assist your issue)Or call us at (1)855-882-2333.

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

This appliance only can be used by adults and persons with reduced physical,sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children.
Always disconnect the appliance from the main supply socket if it is left unattended and before assembling, disassembling or cleaning.
If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
The blades have very sharp edges. Take care when handling or cleaning them
Never use this appliance for anything other than its intended use. This appliance is for household use only. Do not use this appliance outdoors.
Always ensure that hands are dry before handling the plug or starting the appliance.
Always ensure the appliance is on a stable, secure, dry, and level surface.
This appliance must not be placed on or near any potentially hot surfaces(such as a gas or electric hob).
Never immerse any parts of the appliance or power cord and plug in water or any other liquid.
Never let the power cord hang over the edges of the worktop, touch a hot surface or become knotted, trapped or pinched.
Do not use the appliance if it has been dropped or if there are any visible signs of damage or if it is leaking.
Never use any accessory or attachment not recommended by the manufacturer.
Make sure that all attachments are securely and correctly fitted before operating the appliance.
Allow moving parts to come to a stop before changing or cleaning accessories.
Never use harsh, abrasive, or caustic cleaners to clean this appliance.
To reduce the risk of injury, never place the cutting unit on base without ensuring the jug is properly attached. Never remove the jug during operating.
Only operate the appliance with the lid in place.
The jug should not be more than 2/3 full when blending or when the mixing rod is left in place. The mixing rod must be ONLY be used through the hole in the lid when the blender is in operating.
Over-processing will cause the mixture to overheat.
Always ensure that the jug is properly seated in the position and the jug lid is properly fitted and secured before starting the appliance.
when blending hot liquids: do not fill jug above the 1- liter mark, leave the lid plug out to allow steam to escape.
Always start the motor on low speed or auto mode.
Ensure that the lid is located under raised projections on the jug before starting the machine. The lid can only be removed when the appliance is OFF and the cutting unit has ceased turning.
Never leave the blender unattended when in use.

Before using

Ensure that the appliance is turned off and unplugged from the supply socket.
if it is left unattended and before assembling, disassembling, or cleaning.
The cutting unit has very sharp edges. Take care when handling or cleaning them.
Never immerse any parts of the appliance or power cord and plug in water or any other liquid.
Never use harsh, abrasive, or caustic cleaners to clean this appliance.

Remove your blender carefully from the box. You may wish to store the packaging for future use.
Check the contents:
Motor base x1
Jug with cutting unit x1
Mixing rod x1
Lid insert x1
Lid x1
Manual x1
Wash all parts that will come into contact with food. Use warm soapy water then rinse and dry thoroughly.
Using a mild detergent solution, wipe the motor unit with a damp cloth. Dry thoroughly

Parts & Functions

zokop ALW Q16 Commercial Blender - Parts & Functions

Features

High-speed powerful motor
The blender comes with a full copper motor which a speed is about 28000rmp. It can blend any food materials within a limited time. The power of the blender is 2200W, it can do the job quickly and effectively.
SUS420 Food grade cutting unit.
2500ml big capacity jug
Touch control
Preset programs make you easily finish your job

Operating instructions

Operate blender on a flat, clean, and dry surface.
Never operate the blender when the jug is empty.
Do not attempt to remove or replace the jug while the motor is running.
Never run motor where jug is not in place.
Wipe water off of the cushion before the operation, Any water present could be pulled in and will cause damage to the motor.
Make sure the driveshaft on the jug is fully engaged into the drive socket and that the blade is firmly affixed to the drive shaft.
This blender is a high-speed unit. Blending times are much faster than those of other blenders, but extended use will heat up the content of the blender.
If a drink has mixed well but not blended completely, touch the PULSE button for extra blending time or choose a longer automatic cycle.
Always add some liquid to crush ice cubes.

Quick Guide

Ensure that the appliance is turned off and unplugged from the supply socket.
if it is left unattended and before assembling, disassembling, or cleaning.
Do not operate your blender continuously for more than 5 minutes without giving it a rest period of 10 minutes.
Take care if processing hot food.

Add the ingredients to the jug. Don’t fill the jug above the 2500ml mark.
Attach the lid to the jug firmly and put the lid insert into the lid.
Properly place the blender jug on the motor base, making sure the jug fits securely and the lid is tightly attached.
Insert the power plug into an electrical outlet. Then you can hear the sound of bi one time.
Touch the ON/OFF button to activate the control panel. Then you have two ways to operate the blender
1. Normal operation: Touch the MENU button one by one to find the jobs you need. Once you selected, the indicator of the job will light in the window.
Then you can touch the TIMING button to adjust the working time and touch the ON/OFF button to start or just directly touch the ON/OFF button to start. Each job will work according to the order of preset programs and shut off automatically. There are 7 working modes: Smoothies, Ice crush, Soy milk, Sauce, Grind, Extract, Frozen Drink.
2. Quick operation: Touch the jobs shown in the control panel directly to start There are 4 quick operation working models: Smoothies, Ice crush, Soy milk, Extract.

Cleaning & Storage

Ensure that the appliance is turned off and unplugged from the supply socket.
if it is left unattended and before assembling, disassembling, or cleaning.
The cutting unit has very sharp edges. Take care when handling or cleaning them.
Never immerse any parts of the appliance or power cord and plug in water or any other liquid.
Never use harsh, abrasive, or caustic cleaners to clean this appliance.

For ease of cleaning, we recommend that you clean the jug, Lid, Lid insert, and mixing rod as soon as you have finished using them
Clean the motor base with a damp cloth only.
Place a little warm water with a small amount of detergent into the jug.
Attach lid and touch the PULSE button to start the appliance for approximately 15 seconds. This quick cleaning method will help you to remove almost all
residue.
Empty jug, rinse, and leave upturned to dry thoroughly.
To remove or replace cutting, simply turn the retaining ring at the bottom of the jug counter-clockwise..
To extend the lifespan of the cutting unit, please do not immerse the jug in water or leave water in the jug for a long period of time. Following this precaution will help to prevent rusting of the ball bearing by reducing its potential contact with water to a minimum.