sunsky EDA002181401 Smart Watch User Guide
- June 6, 2024
- sunsky
Table of Contents
- Product Overview
- Download “Aiwear” APP
- Specifications
- Function Description
- Shut down / restore factory settings
- Bluetooth On/Off
- Find Bracelet
- Notice
- Heart Rate Monitoring
- Motion Monitoring
- Raise your hand to light up the screen
- Remote camera
- Alarm clock reminder
- Health reminder
- Do not disturb mode
- Pulse function
- Precautions
- Warranty Card
- Maintenance instructions
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
sunsky EDA002181401 Smart Watch User Guide
Product Overview
Download “Aiwear” APP
- When prompted to install after downloading, check (allow) “run in background” and “trust the application”.
- When installing, if Bluetooth is not turned on, please press the prompt to turn on Bluetooth.
- For the convenience of users, the QR code on the last page and back cover of this operation guide is the same as that on this page, which can be scanned and downloaded.
Dear users
Thank you for using this smart sports watch! In order to facilitate you to use
it better, please read this operation guide carefully before use.
Specifications
HDware
- Bluetooth: BT 4.0
- Reminder: vibration / pulse
- The display screen shows : raise your hand to light the screen or turn your wrist to light the screen
- Supported versions: Android 4.4 and IOS 8.0 or above
Performs
- Motion data: long term storage
- Waterproof level: domestic waterproof
- Strap size: International Standard
Electrical
- Electrical parameters
- Charging time: about 3 hours
- Standby time: 5-8 days
- Bluetooth distance: 8-10m (open and interference free environment)
- Battery capacity and battery type: 100mA lithium battery
Material
- Material technology
- IBS Case material: IBS
- trap material: silicon tape
- Buckle material: stainless steel
- IBS Bottom cover material: IBS
- 47.7258.0mm Dial size (L w h): 47.7 25 8.0mm
- 20mm Strap width: 20mm
- 250mm Total length of strap: 250mm
Function Description
-
Raise your hand to light up the screen
Click “my” at the bottom of the app and turn on the “raise your hand to light up the screen” switch in the page to realize the function of raising your hand to light up the screen. -
Heart rate monitoring
After waking up the watch, click the touch point to enter the heart rate test menu to test the heart rate. -
Blood pressure monitoring
After waking up the watch, click the touch point to enter the menu and find the blood pressure monitoring. After the test, the current blood pressure value will be displayed and recorded in the app. -
Blood oxygen test
After waking up the watch, click the touch point to enter the menu and find the blood oxygen monitoring. After the test, the current blood oxygen value will be displayed and recorded in the app oxygen pressure record. -
Movement monitoring
Seven sports modes can be selected (walking, running, cycling, rope skipping, tennis, badminton, table tennis). -
Notice
Support incoming call notification, SMS notification (long press SMS notification to return to the main interface) and app message push. -
Remote control photography
Click “my” at the bottom of the app, click the “remote camera” function on the page, enter the camera page (give the app permission to take photos), shake the watch, and take photos after the mobile phone counts down for three seconds. -
Health reminder
Click “my” at the bottom of the app and “health reminder” on the page to watch vibration / pulse prompt. -
Find the bracelet
Click “my” at the bottom of the app and “find Bracelet” on the page to find the bracelet. -
Pulse function
- Pulse alarm clock reminder
- Pulse sedentary reminder
- Pulse motion reminder
- Relieve carsickness
- Focus mode
- Driving mode
Shut down / restore factory settings
Shutdown operation
Shutdown operation, tap the watch to enter the “more” menu, long press to enter, find the “shutdown” function option, and long press to shut down.
Restore factory settings
Restore the factory settings, tap the watch to enter the “more” menu, long press to enter, find the “restore” function option, and long press to restore.
Bluetooth On/Off
After the watch is turned on, Bluetooth has been searched. After the app is downloaded, click the “search Bracelet” menu, select the name of the watch device, and click the Bluetooth device to connect successfully.
After successful Bluetooth connection:
- You can view the Bluetooth name of the watch at “add device”;
- The time of the watch is synchronized with the time of the mobile phone. Click “find Bracelet” on the app, the watch will vibrate on the screen and display the corresponding prompt icon. (the Bluetooth ID on the watch side will show the connection)
Bluetooth auto Reconnection:
Beyond the Bluetooth connection range, there is no reminder at the watch end. When the watch reaches the valid range of Bluetooth connection, Bluetooth will automatically reconnect; Close the application background or restart the mobile phone, or click the one button cleaning provided by the mobile phone to enter the app again. When the Bluetooth connection is within the effective range, the Bluetooth will be automatically reconnected.
Unbind and disconnect Bluetooth:
Open the app, click “slide menu” in the “add device” interface, and select “unbind” to unbind and disconnect Bluetooth, the watch Bluetooth ID will show disconnected.
Find Bracelet
Find watch
Click “my” at the bottom of the app and “find Bracelet” on the page to remind you of the vibration of the watch
Notice
Call SMS reminder
After the watch is connected to the mobile app, when the phone has an incoming call or text message, the caller icon and phone number will be displayed at the top of the dial, and the watch will give a vibration reminder.
Information reminder
After the watch is connected to the mobile APP, when the mobile phone has a message, there will be a corresponding icon on the dial, and the watch will vibrate and alert. The information includes QQ, WeChat, Twitter, Facebook, WhatsApp, Skype, etc. (If the reminder watch of one of the above apps is closed in the app, the app’s information will not be alerted).Long press to enter information, tap page, and long press to exit.
Heart Rate Monitoring
After waking up the watch, click the touch point to enter the heart rate test menu to test the heart rate.
Motion Monitoring
Select the “exercise” mode in the menu bar of the watch, click OK to enter the submenu, and when switching to the exercise mode you need, multiple exercise modes can be selected,(running, cycling, rope skipping, tennis, badminton, table tennis) these sports modes. Select the motion mode, long press to enter, and long press to exit after entering the motion program.
Note: This product does not have GPS, no specific motion track function, motion track function in APP is invalid!
Raise your hand to light up the screen
Turn on the bright screen on the app, tilt the watch inward and face directly in front of you, and the watch end lights up
Remote camera
Operation steps
Click “my” at the bottom of the app, click the “remote camera” function on the page, enter the camera page (give the app permission to take photos), shake the watch, and take photos after the mobile phone counts down for three seconds.
Alarm clock reminder
Click “alarm setting” on the app, select the alarm reminder and add the alarm time. When the alarm time is reached, the watch end vibrates and lights up and displays the alarm icon (this setting only sets the alarm for the watch, which has nothing to do with the alarm clock of the mobile phone).
Health reminder
Click “my” at the bottom of the app and “health reminder” on the page to watch vibration / pulse prompt.
Do not disturb mode
After the do not disturb mode is turned on, except the alarm clock, all
notification
reminders turned on in the setting will no longer have automatic bright screen
vibration reminders at the watch end when pushing notifications.
Pulse function
Caution reminder: The skin is prone to allergies when using a pacemaker. Users who are too sensitive to pulse stimulation should not use this function;
- Adjust the pulse intensity through the “pulse intensity” menu.
- Turn on the alarm pulse switch to realize the alarm pulse reminder.
- Turn on the “sedentary reminder” switch to realize pulse sedentary reminder.
- Turn on the “moving target” switch to realize pulse moving target reminder.
- Turn on the “ease motion sickness” switch, wear the smart watch in the reverse direction, touch the pulse at the bottom, and click the “ease motion sickness” function menu on the smart watch to realize the ease motion sickness function.
- Turn on the “focus mode” switch and select the interval of pulse refreshing.
- Turn on the “driving mode” switch and select the interval of pulse refreshing.
Precautions
-
Android 4.2 or IOS 8.0 and above devices supporting Bluetooth 4.0;
-
Please connect the charger for the first time to activate the watch;
-
Please confirm whether the network is abnormal when downloading the APP;
-
Bluetooth connection:
- please ensure that the Bluetooth of the mobile phone is on and the watch is on;
- when searching Bluetooth, please ensure that the watch has not been bound by other accounts;
- when searching Bluetooth, the watch and mobile phone should be as close as possible.
-
If the watch terminal does not receive the push message, please ensure that APK is running in the background and the message notification is on (auxiliary functions also need to be on)
-
If the movement, sleep and heart rate data are not synchronized to APK, please try to disconnect Bluetooth and reconnect from APK;
-
The Bluetooth connection is abnormal and cannot enter the APK. Please try to enter the mobile application management to clean up the cached data of the APK;
-
If the Android phone APP will automatically exit, the phone needs to be set separately in the settings;
Find “Settings” – “battery” – “custom power consumption protection” in the mobile phone, select the “aiwear” menu, click enter, and select allow background operation.
Find “Settings” – “battery” – “application quick freezing” in the mobile phone, select the “aiwear” menu and turn off automatic quick freezing. -
The watch needs to be unbound from the current account before binding to another account;
-
If the watch cannot light up, please connect the watch to the charger
Warranty Card
Thank you for choosing our products and services! In order to protect your consumption rights and interests, we hereby make the following pledge to you for the products you purchased Warranty description.
Warranty service content
-
The warranty period of the product is 12 months from the date of purchase
(packaging materials are not within the scope of warranty); -
If the product has quality problems within 7 days after purchase, and the
appearance is not damaged by people after purchase, it can be directly replaced with a new machine of the same style and model; -
In case of product failure, it is recommended that you first consult your sales
organization. After eliminating misoperation factors, they will arrange after- sales maintenance services for you.
The following conditions are not included in the warranty
-
The product exceeds the warranty period;
-
The purchase certificate is not issued or the company is unable to verify the
purchase date; -
The product is broken, worn and scratched by external force, and the strap is
broken due to abnormal wearing; -
Failure and damage of the product due to water inflow;
-
Product failure or damage due to earthquake, fire and other force majeure;
-
Other quality problems caused by non product design and manufacturing defects.
Maintenance instructions
-
When sending for repair, we only accept defective devices (host or accessories), please do not send irrelevant devices to the sales organization or after-sales service center;
-
When sending for repair, please show this quality assurance card and purchase
certificate, and attach the product fault description (the professional maintenance of the company shall prevail, and we will call you for verification if necessary); -
The sender shall be responsible for the freight generated from the round-trip
inspection and the safety of goods transportation; -
After maintenance, the product will continue to enjoy after-sales service within
the warranty period; -
For non warranty products, the company provides paid maintenance services.
Please refer to relevant service regulations for relevant expenses and extended
warranty period.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>