MARQUANT 943134 Wireless Thermometer Instruction Manual
- June 6, 2024
- MARQUANT
Table of Contents
943134-9431345
Wireless Thermometer
Instruction Manual
WIRELESS THERMOMETER
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for
future reference. (Translation of the original instructions).
Care for the environment!
Recycle discarded products in accordance with local regulations.
JULA AB, BOX 363, SE-532 24 SKARA 2022-01-11
© Jula AB
EU DECLARATION OF CONFORMITY
Item number: 943134, 943135
Jula AB, Box 363, SE-532 24 SKARA, SWEDEN
This declaration of conformity is issued under the sole responsibility of the
manufacturer
WIRELESS THERMOMETER
Conforms to the following directives, regulations, and standards:
| Directive/Regulation | Harmonized standard |
|---|---|
| RED 2014/53/EU | ETSI EN 301489-1 V2.2.3, ETSI EN301489-3 V2.1.1, EN 663:2017, |
ETSI 300220-1 V3.1.1, ETSI EN 300220-2 V3.2.1, EN 62368-1:2014+A1
RoHS 2011/65/EU + 2015/863| EN 50581:2012
This product was CE marked in a year:
Skara
Christian Blank
BUSINESS AREA MANAGER
Signatory for Jula and authorized to compile the technical documentation.
SAFETY INSTRUCTIONS
Read the operating instructions carefully before use. Save them for future reference.
TECHNICAL DATA
| Transmitter frequency (wireless communication) | 433.92 MHz |
|---|---|
| Transmission range | <60 m |
| Battery sold separately) | 2x LRO3 AM |
| Measuring range (indoors) | 0°C (32°F) — 50°C (122 °F) |
| Measuring range (outdoors) | -39.9 °C (-39.8 °F) — 59.9 °C (139.8 °F) |
| Size (indoor unit) | 60×22.5×90 mm |
| Size (outdoor sensor) | 92x40x23 mm |
DESCRIPTION
Functions
- Display of highest and lowest measured indoor and outdoor temperatures.
- Temperature display in °C or °F.
- 12 or 24-hour display with manual setting of the clock.
USE
Before using it for the first time
-
Open the battery compartment on the back of the receiver and insert the batteries with the correct polarity. Replace the battery compartment cover.
-
Open the battery compartment on the back of the transmitter and insert the batteries with the correct polarity. Replace the battery compartment cover.
-
When the batteries are inserted all the symbols on the display will
go on for 3 seconds. -
The receiver searches for a connection to the transmitter. This takes about 3 minutes and a flashing icon for the RF antenna is shown in the receiver display outdoor field.
- IN/OUT button
- MEM/+ button
- SET/°C/°F button
Manual setting of the clock
- Press the button (3) for about 3 seconds to confirm. The display field for 12/24 hour display flashes. Press the button (2) to set the 12/24 display.
- Press the button (3) again to confirm. The display field for hours flashes. Press the button (2) to set the right hour.
- Press the button (3) again to confirm. The display field for minutes flashes. Press the button (2) to set the right minutes.
- Press the button (3) again to confirm and finish, and to switch to clock mode.
- After 30 seconds without pressing a button the clock switches automatically from setting mode to normal mode.
Temperature display in °C/° F
-
Select the temperature display in °C or °F by tapping the button (3).
Display of highest and lowest measured temperature. -
Switch between display of current temperature and highest/lowest since last reset for indoor and outdoor temperature by pressing the button (2).
– Press once to show the highest measured indoor and outdoor temperature.
— Press twice to show the lowest measured indoor and outdoor temperature.
– Press three times to go back and show the actual temperatures. -
Press the button (3) for about 3 seconds to reset the highest and lowest temperature.
Switching between displaying the indoor and outdoor temperature
- Tap the button (1) to switch between showing the indoor and outdoor temperature on the display.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>