THOMSON WHP8650 On-Ear Bluetooth Headphones Instruction Manual

June 6, 2024
THOMSON

ON-EAR Bluetooth® Headphones
Casque SUPRA-AURAL Bluetooth®
ON-EAR Bluetooth® Kopfhörer
WHP8650
Operating Instructions

thomsonconsumer.com

Thank you for choosing a Thomson product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Controls and displays

  1. + button
  2.  – button
  3. Multi-function button (MFB)
  4. Status LED
  5. Microphone
  6. Micro-USB connection

Explanation of warning symbols and notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package contents

1x “WHP8650” Bluetooth® over-ear stereo headphones
1 x micro-USB charging cable
1 x bag
1 x quick guide
1 x warning and safety instructions

Safety instructions

  • The product is intended for private, non-commercial use only.
  • Use the product only for the intended purpose.
  • Children should be supervised to ensure that they do not play with the product.
  • Do not use the product in areas in which electronic products are not permitted.
  • Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
  • Do not open the device or continue to operate it if it becomes damaged.
  • Do not bend or crush the cable.
  • Do not drop the product and do not expose it to any major shocks.
  • Dispose of packaging material immediately in accordance with the locally applicable regulations.
  • Do not modify the product in any way. Doing so voids the warranty.
  • Protect the product from dirt, moisture, and overheating and use it in dry environments only.
  • Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
  • Only use the article under moderate climatic conditions.
  • As with all electrical products, this device should be kept out of the reach of children.
  • Do not operate the product outside the power limits specified in the technical data.
  • Do not use the product in a damp environment and avoid splashing water.
  • While driving a car or using sports equipment, do not allow yourself to be distracted by your product and keep an eye on the traffic situation and your surroundings.
  • The battery is permanently installed and cannot be removed; dispose of the product as a whole in accordance with the statutory regulations.
  • Do not incinerate the battery or the product.
  • Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.
  • Do not use the product during the charging process!

Warning — rechargeable battery A

  • Only use suitable charging devices or USB connections to charge the product.
  • Do not use defective chargers or USB ports and do not attempt to repair them.
  • Do not overcharge the product or allow the battery to completely discharge.
  • Avoid storing, charging, and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
  • Charge regularly (at least quarterly) during periods of prolonged storage.

Warning – magnets

  • This product generates magnetic fields. Persons with a cardiac pacemaker should consult a doctor before using this product, as the pacemaker’s proper function could be affected.
  • Do not store bank or similar cards with magnetic strips near the charging box or earphones. The data on the cards could be damaged or completely deleted.

Warning – high volume

  • High sound pressure!
  • There is a risk of hearing damage.
  • To prevent any loss of hearing, avoid listening at loud volumes for prolonged periods.
  • Always keep the volume at a sensible level. Loud volumes, even over short periods, can cause hearing loss.
  • hearing damageUsing this product limits your perception of ambient noise. You should therefore not drive or operate machinery while using them.

Switching on/off

ON Press the MFB button (3) for around 3 seconds until a signal tone is heard and the LED (4) flashes blue.
OFF To switch off, press the MFB button (3) for around 3 seconds until a signal tone is heard and the LED (4) flashes red and then goes out.

Note – Automatic switch-off of the product
The product is equipped with an automatic switch-off mechanism. If there is no connection to your device within 3 minutes, it switches itself off automatically.

Charging

Fully charge the headphones once before using them for the first time.

1. Switch off the headphones and connect them
Ensure that the headphones are switched off before charging them.
Connect the USB charging cable included to the charging socket (6). Connect the free plug on the micro-USB charging cable to a suitable USB charger. To do this, consult the operating instructions for the USB charger you are using.

2. Charging process for the headphones
The LED (4) lights up solid red during the charging process. Once the charging process is complete, the LED (4) lights up blue.

It can take up to 2 hours for the battery to be fully charged.

Note
During the charging process, the Bluetooth® connection is automatically disconnected.

3. Battery capacity
When the headphone battery capacity is low, the LED (4) flashes red and a short signal tone is heard.

Bluetooth® pairing

Note – Pairing

  • Make sure that your Bluetooth® -capable device is switched on and that Bluetooth® is activated.
  • For more information, please refer to the operating instructions of your device.

The headphones and the device should not be more than 1 meter apart. The shorter the distance, the better.
Switch the headphones on using the MFB key (3).

1. Check the status of the status LED (4)

If the status LED (4) is flashing alternately:
The headphones are searching for a Bluetooth® connection.

If the status LEDs (4) are flashing:

The headphones are already paired with a Bluetooth® device.
Search using your device for the headphones (only required on the first connection) Open the Bluetooth® settings on your device and wait until the list of found Bluetooth® devices shows WHP8650.
Select WHP8650 and wait until the headphones are shown as connected in your device’s Bluetooth® settings. You will hear a brief signal tone.

Note – Bluetooth® password
Some devices require a password in order to connect to another Bluetooth® device.

  • If your device requests a password to connect to the product, enter 0000.

3. Disconnecting the Bluetooth®  connection
Disconnect the headphones via your device’s Bluetooth® settings.

Controls

Note

  • Please be aware that your terminal device must support some functions if they are to be used.
  • For more information, please refer to the operating instructions of your device.
Voice assistant function

Tap the MFB button (3) twice to initiate communication with Siri or the Google Assistant.

Note – Siri
Siri is only available on suitable devices running iOS 5 (iPhone 4s or later) or higher.

Note – Google Assistant

  • The Google Assistant is only available on suitable devices running Android 5.0 or higher with Google Play Services, >1.5 GB of free memory, and a minimum screen resolution of 720P.
  • The Google Assistant App must be available on your device and be set as the default voice assistant.

Hands-free function

It is possible to use the earphones like a hands-free facility for your mobile phone.

1. Make a call
Dial the number directly via your device to make a call.

2. Accept a call

Press the MFB button (3) to accept an incoming call.

3. Reject a call

Press and hold the MFB button (3) for around 2 seconds or use your device to reject an incoming call.

4. End a call

During the call, press the MFB button (3) once to end the call.

5. Last number redial
You can redial the last number you called via the voice assistant function (7.1).

Audio playback

Note
Please note that this function is only possible when a Bluetooth® connection is active.

1. Start playback on your device.

2. Play / Pause

Press the MFB button (3) once to pause or start audio playback.

3. Next track

Press and hold the + button (1) for around 2 seconds to skip to the next track.

4. Previous track

Press and hold the – button (2) for around 2 seconds to skip to the previous track.

Volume control

1. Increase volume

Press the + button (1) to increase the volume. Once the maximum volume is reached, a signal tone is heard.

2. Reduce the volume

Press the – button (2) to reduce the volume. Once the minimum volume is reached, a signal tone is heard.

Technical data

Bluetooth ® headphones

Impedance headphones / microphone 320/<2.2k0
Frequency headphones / microphone 20 Hz — 20 kHz / 100 Hz — 10 kHz
Sensitivity headphones / microphone 93 dB +/- 3dB / -42 dB +/- 3dB
Range max. 10m
Bluetooth’ technology v5.0
Profiles A2DPv.1.3 / AVRCPv1.5 / HFP v 1.6
Transmission frequency 2.4 — 2.48 GHz
Rechargeable battery Li-P 3.7 V
Battery capacity 290 mAh
Power consumption Max. 250 mA
Charging voltage max. 5V USB
Total weight 139g
Standby/music/talk time max. 100 h / 36.5 h / 12 h

Care and maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-0 (German/English) Further support information can be found here: www.hama.com

Recycling information

Note on environmental protection:
After the implementation of the European Directives 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electrical and electronic devices, as well as batteries, must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries to the designated public collection points or to the point of sale at the end of their service lives. Detailed information on this topic is defined in the national laws of the respective country. The presence of the above symbol on the product operating instructions or package indicates that the product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices/ batteries, you are making an important contribution to protecting our environment.

Declaration of Conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00132505, 00132507] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www .thomson-av-accessories.eu -> 00132505, 00132507 -> Downloads.

Frequency band(s) 2402 MHz – 2480 MHz
Maximum radio-frequency power transmitted 2.63 dBm

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals