ADLER AD 4082 Glass Bowl Shredder User Manual
- June 6, 2024
- ADLER
Table of Contents
ADLER AD 4082 Glass Bowl Shredder
SAFETY
CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial
purpose.
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only for home use. Do not use the product for any purpose that is not compatible with its application.
- The applicable voltage is 220-240V ~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never put the power cable, the plug or the whole device into the water or other fluid. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use product in humid conditions (bathroom, cabins).
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Place the device on a cool, stable, even surface, away from any kitchen appliances that heat up, such as: electric cooker, gas burner, etc.
- Never use the product close to combustibles.
- Do not let cord hang over edge of counter or touch hot surfaces.
- Never leave the product connected to the power source without supervision.
- In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
- Do not put your fingers or any other objects into the cup when the device is turned on.
- Make sure that long hair, scarves, ties, etc. do not hang over the cup and working parts of the device.
- For safety reasons, only original accessories and spare parts should be used.
- When removing accessories, handle the blades very carefully: they may injure.
- Changes to the accessories may only be made when the device is switched off. Before change disconnect device from the power supply.
- Do not put anything other than food into the chopper bowl. Do not put hot products and liquids (over 80°C) into the bowl.
- Do not use the appliance to crush ice, bones or other hard products.
- Make sure the cover is properly fitted before turning power on the device.
- The appliance is not suitable for whipping eggs and kneading dough.
- To clean the housing, do not use aggressive detergents, as they may remove the applied graphic informational symbols such as: scales, markings, warning signs, etc.
- THE MAXIMUM CONTINUOUS WORKING TIME OF THE CHOPPER IS 15 sec. After 15 sec. continuous operation, wait 2 minutes before restarting it.
- If the blades become jammed, always unplug the power cord from the electrical outlet before removing the blockage.
- Do not move nor lift the device while it is working.
- Handle the blades carefully to avoid injury. Be careful when handling cutting blades, when emptying the bowl and during cleaning.
- Always disconnect chopper from the power supply when it is left unattended and before assembling, disassembling or cleaning.
DESCRIPTION OF THE DEVICE
- A1. A2. On/off pulse buttons
- B. Motor unit
- C. Cover
- D. Bowl
- E1. Top set of blades
- E2. The lower set of blades
IMPORTANT NOTES:
- Do not operate the device continuously for more than 15 seconds, after this time leave it for 2 minutes to cool.
- Do not operate the device when the bowl is empty.
- Do not pour hot liquids (over 80°C) into the bowl.
BEFORE FIRST USE Remove all protective elements and thoroughly clean the device before the first use. Assemble blades if necessary.
HOW TO ASSEMBLE BLADES Place the top set of blades (E1) on the shaft of the lower set of blades (E2). Carefully move the top set of blades (E1) clockwise until you hear the “click” sound. To disassemble move top part (E1) anti-clockwise.
ATTENTION: Blades are sharp!
USING THE DEVICE:
-
Place the bowl (D) on a flat and stable surface.
-
Place the blades (E1 and E2) on the guide pin in the bowl (D). Carefully push down the blades all the way down. Hold down and spin to check if they are mounted correctly.
-
Put ingredients into the bowl (D).
-
Place the cover (C) on the bowl.
-
Place the motor unit (B) on the tip of the blades. Move it to fit the cover (C).
-
Connect the device to the power socket.
-
Turn on the motor by pressing the speed I button (A1) or the speed II button (A2).
-
To stop the appliance remove your fingers from the chosen speed button (A1 or A2).
NOTE: To obtain a better quality of chopping, operate the appliance by using the pulse method. Press the speed button (A1 or A2) for two seconds and release. Repeat if necessary. -
When you have finished using the device, disconnect it by pulling the plug out off the power outlet. Remove the motor unit (B) and then the cover (C). Carefully take out the blades (E1 and E2) from the bowl.
- IMPORTANT: Never put blades (E1 and E2) on the motor unit (B) and then into the bowl (D)!
- IMPORTANT: Never turn on the device without the cover (C)!
- NOTE: Before adding the ingredients always place the blades (E1 and E2) first.
CLEANING
- Always disconnect the device from the power outlet before cleaning.
- Wash the bowl (D), the cover (C), and the blades (E1 and E2) in warm water with a mild detergent
- Wipe the motor unit (B) with a damp cloth. NOTE: Blades and bowl are dishwasher safe.
TECHNICAL DATA
- Power supply: 220-240V ~ 50 / 60Hz
- Power: 300W
- Maximum power: 550W
- Capacity: 1.2L
- Maximum continuous operating time: 15 seconds
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container Worn device should be returned to the appropriate point storage because it is dangerous in the device ingredients may pose a threat to the environment. The electrical device should be handed over to limit its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.