Saramonic Blink800 5.8GHz Digital Wireless Microphone System User Manual

Saramonic Blink800 5.8GHz Digital Wireless Microphone System

Introduction

The Saramo111c Blrnk800 BI is an S 8 GHz durable metal w, release lavalier systen· t hat delivers de1a1led, crystal clear sound. With the 3.5mm TRS AUD output cable, compact, with DSLRs, mirrorless came ras, camcorders, , recorders, and more. The Blink800 system is designed to automat avoid interference for ha!.!le-free and liable sound performance.

Product Structure

3.5mm input transmitter Blink800 TX-35

1. Power and Pairing Indicator

   • Power Functions:
   • Flashing Red Light Low Battery
   • Pairing Function
   • Flashing Blue Ligh: (every 1 second)-Unpaired Quiel( Flashing Blue Light (every 0.5 seconds)
   • Waiting for Pairing Solid Blue Light=Pairod Succos. fully
     Note: if the transmission signal Is poor, please follow the steps below to select a different channel until you get a clear sound. Quickly press the power button of TX-35 to select the channel. Once the receiver and transmitter are paired, they will be connected automatically on the same channel, even when powered off and on. (Red light flashing once• Cl,<tnm.!1 1, Red light flashing twice• Channel 2, Red light flash ing thrH time 3, Red light flashing fou.-times• Channel 4)

2. Pair Sutton

3. Power Button

   • Long press to turn on or off the transmitter.

4.  MIC IN jack (3.5mm TRS locking input jack)

5. USB Type-C Charging Port

6. Charge Indicator

   • Solid Red L,ght=Chargmg
   • get nuns oH = Fully Charged

7. Built-in Antenna
   Note: Be canful to avoid violent collisions to the antenna

3.5mm output receiver Bllnk800 RX-35

1. Power and Pairing indicator
   • Power Functions:
   • Flashing Red Light•Low Batte,y
   • Pairing Functions:
   • Flashing Blue Ugh, (every 1 second}• Unpa red
   • Ouic< Flashing Blue Light (every 0.5 seconds), Waiting
   • Payment
   • Solid Blue L,ght=Pa red Succc1osfully
   • Once the receiver and transport are paired, they w,11 be connected with each home, automatically, even when powered off and on.
2. Pair Button
3. Power Button
   • Long press to turn on or off the receiver.
4. OUTPUT Jack (3.5mm TRS locking output 1aclt)
5. USS Type-C Charging Port
6. Charge Indicator
   • Solid Red Light- Char91n9 Battery
   • The light turns off • Fully Charged
7. Built-In lnte<nal Antenna
   Note: Be careful to avoid violent collisions to antenna. If the tr.animation signal is poor, pie/Me follow the steps below to select a different channel until you get a clear sound. Ouicld)I press the power button ofTX-35 to select the channel. Once the receiver and transmitter are paired, they will be connected automatically on the same channel, even when powered off and on. (Red lignt flashing once~Cliannel 1, Red light flashing twice=Channel 2, Red light flashing three t,mes=Channel 3, Red light flashing four time$=Channel 4)

Quick Setup Guide (Blink800 B1)

Attach the belt dip to the TX..JS

1. Press the TX-35 down fitting into the hornontal groove on the belt clip.

2. attach the TX-35,onto the place according to the shown icon of groove. Please repeat: t’1e above steps for attaching the adaptor to RX-35.

   • Pairing Functions:
     Flashing Blue light (every 1 second)• Unpaired Quick Flashing Blue light (every 0.5 second)• Waiting for Pairing Solid Blue Light=Pairod Successfully Once the receiver and transmitter are paired, they wdl be connected with each other automatically, even when powered off and on.
     Note: If the transmission signal is poor, please follow the steps below to select a different channel until you get a clear sound. Quickly press the power button of TX-35 to select the channel. Once the receiver and transmitter are paired, they will be connected automatically on the same channel, even when powered off and on. (Red fight flashing once=Channel 1, Red fight flashing twice=Channel 2, Red light flashing three times=Channel 3, Red light flashing four times•Channel 4)

3. Pair Button

4. Power Button

   • Long press to turn on or off the transmitter.

5. XLR output connector

6. USB Type-C Charging Port

7. Charge Indicator

   • Solid Red Light=Charging Batte,y
   • The light turns off = Fully Charged

8. Built-in Antenna
   Note: Be careful to avoid violent collisions to the antenna.

9. Charge Indicator

   • Solid Red light  Charging Battery
   • The light turns off  Fully Charged

10. Buil in Internal Antenna
    Note: Be careful to avoid violent collisions to the antenna.

Quick Setup Guide (Blink800 82)

XLR output receiver Blink800 RX-X.LR

1. Power and Pairing Indicator

   • Power Functions:
   • Flashing Red light•Low Battery
   • Pairing Functions:
   • Flashing Blue Light (every 1 second)• Unpaired
   • Quick Flashing Blue light (every 0.5 second)• Waiting for Pairing
   • Solid Blue Light=Paired Successfully Once the receiver and transmitter are paired, they will be connected w,th each other automatically, even when powered off and on.

2. Pair Button

3. Power Button

   • Long press to tum on or off the .-eceiver.

4. XLR output connector

5. USB Type-C Charging Port

6. Attach the 61ink800 TX-XLR transmitter to dynamic microphone, self-powered microphone, or other XLR audio output device. Pushing in the microphone or XLR male audio output into the XLR female input of Blink800 TX-XLR until it clicks into place.
   Note: Please tum off the transmitter before attaching or removing the microphone.

7. Attach the Blink800 RX-XLR receiver to the video camera, mixer, recorder, or other XLR input device.
   Note: Please make sure the transmitter and receiver pairing has been completed.

Operation Guide

For the 8link800 81 kit

1. Tum on the TX-35 transmitter and RX-35 receiver.

2. The transmitter and receiver have been paired success• fully before leaving the factory.
   Note: If the transmitter and receiver are disconnected, please follow the steps below to connect them manually. Press the pair button of receiver and transmitter simultaneously and hold for 3 seconds, the;indicators of receiver and transmitter shout be quick flash at eve,y 0.5 seconds waiting for paiting. Thi! pairing mode off wl!iin )16U have nor operate the receiver or transmiter for 20 seconds.

3. When pairing succe ss, the indicators of transmitter and receiver are solid blue.
   Note:

4. To pair a second receiver RX, just repeat the step 2. (Receivers only can receive one transmitter at a time. Transmitters can transmit to up to 4 receivers simultane ousfy.)

5. If the transmission signal is poor, please follow the steps below to select a different channel until you get a dear sound. Quickly press the power button of TX-35 to select the channel. Once the receiver and transmitter ar paired1 they will be connected automatically on the same channel, even when powered off and on. (Red light flashing once=Channe/ 1, Red light flashing twice• Channef 2, Red fight flashing three times• Channef 3, Red light flashing four times=Channel

6. Attach the Blink800 TX-635 transmitter to instrument, or any 6.35mm output device.

7. Attach the Blink800 RX-635 receiver to the mixer, recorder. pedalboard, guitar amplifier etc.

8. You are ready to record.

Specification

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>