BIOS Medical Portable Bath Board Seat Instruction Manual
- June 3, 2024
- BIOS Medical
Table of Contents
BIOS Medical Portable Bath Board Seat
BATH BOARD ASSEMBLY
- Place plastic bolts through adjustment slots.
- Align adjustment leg with plastic bolt and turn counter clockwise until snug. Do not over tighten adjustment legs.
HANDLE ATTACHMENT
- Place handle into holes on the bath board and align slotted plastic screws.
- Tighten slotted plastic screws using a coin until snug. Do not over tighten.
BATH BOARD INSTALLATION
- Loosen adjustment legs slightly and move them outwards so they make contact with the inner walls of the bathtub. Re-tighten adjustment legs. The bath board should now fit securely in the bathtub. It should not exceed the outside wall of the bathtub by more than 2 cm.
One Year Warranty
This Bath Board has a 1-year warranty to be free of manufacturing defects in
materials and workmanship under normal applications for 1 year of the original
owner. If this product becomes inoperable due to defect and requires repair,
return the product with all component pieces and proof of purchase to the
address listed below. This warranty does not cover any shipping/transport
costs. This warranty does not apply if the product is subject to misuse,
neglect, rough handling, or damage. Ship the unit prepaid and insured (at the
owner’s option) to Thermor Ltd.
Attn: Repair Department www.biosmedical.com
Email: support@biosmedical.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>