KALEN TOOLS 29601 PowerBox1 Magnetic Mounted Power Strip Instructions

29601
PowerBox1 – Instructions

KLEIN TOOLS®
MODEL NO: 29601
POWERBOX I
RELOCATABLE POWER TAPS WITH SURGE PROTECTOR
WWW.KLEINTOOLS.COM

WARNING;
RISK OF ELECTRIC SHOCK. DRY INDOOR LOCATION USE ONLY. DO NOT EXPOSE TO LIQUID, VAPOR, RAIN. DO NOT PLUG INTO ANOTHER RELOCATABLE POWER TAP OR AN EXTENSION CORD. KEEP AWAY FROM CHILDREN.
15A 125V∼ 60Hz 1875W
USB OUTPUT TOTAL – 45W
USB-A 5V12.4A USB-C 5V/3.0A, 9V/3.0A,
12V/3.0A 15V13.0A 20V12.25A
CAN ICES-3(B)/NMB-3(B)
CLASS 2 POWER SUPPLY
TYPE 3 SPD
VPR: 600V (L-N, L-G, N-G)
(VI)
CONFORMS TO UL STD 498, 1310, 1363, 1449; CERTIFIED TO CSA STD C22.2 # 42, 223, 269.3, 308

CONTENTS

The Klein Tools PowerBox1 is a multi-port AC and USB power distributor with powerful LED work light and surge protection.

• 29601 PowerBox1
• Instruction Sheet

GENERAL SPECIFICATIONS

• AC Power Cord: 5 ft. (1.5 m), 14ga, NEMA 5-15P,
  SJTW Jacket (105C/300V)

• AC Input: Nominal 120V AC, 15A, 60Hz

• AC Output: NEMA 5-15R, 120V/15A, 60Hz, Max. output 1875W

• Surge Protection: 2160 Joules, Class 3, 600V (L-N, L-G, N-G)

• Over-current Protection: 125V, 15A

• USB Output (total 45W):
  USB-A: 5V/2.4A
  USB-C: 5V/3.0A, 9V/3.0A, 12V/3.0A, 15V/3.0A,
  20V/2.25A,
  Power Delivery (PD) compliant

• LED Work Light Output: 100 lumens

• Magnets: Neodymium, N35

• Operating Temperature: 14° to 122°F (-10° to 50°C)

• Storage Temperature: -4° to 158°F (-20° to 70°C)

• Operating Altitude: 6562 ft. (2000 m)

• Operating Humidity: 85% non-condensing

• Dimensions: 5.85″ × 1.80″ × 4.73″ (149 × 46 × 120 mm)

• Weight: 1 lb., 10.6 oz. (0.75 kg)

• Drop Protection: 6.6 ft. (2 m)

• Standards: FCC, IC

Conforms to UL STD. 498, 1310, 1363, 1449; Certified to CSA STD.C22.2 NO. 42, 223, 269.3, 308.
Specifications are subject to change.

WARNINGS
Read, understand, and follow these instructions to ensure safe operation. Failure to observe these warnings can result in a risk of fire, electric shock, serious injury, and/or property damage.

• DO NOT use the product that is damaged or modified.
• DO NOT subject to vibration, impacts, or drops. The housing may not show signs of damage, but internal components may have been compromised. It is advisable to replace the unit if any such severe events occur.
• DO NOT expose to rain or snow.
• Keep away from high voltage devices.
• DO NOT attempt to insert other USB connector types into the USB-C or USB-A ports.
• DO NOT overload surge protector (1875W maximum).
• Use indoors and in dry locations.
• DO NOT connect to an ungrounded outlet.
• DO NOT use extension cord adapters that eliminate the connection to the ground.

SYMBOLS ON PRODUCT

Warning or Caution
Strong Magnetic Field
VI Level VI Efficiency Standard
Risk of Electrical Shock
Read Instructions

FEATURE DETAILS (FIG.A)

1. 5′ (1.5 m) AC Power Cord
2. AC Power On/Off Switch
3. 120V AC Power Outlets (×4)
4. USB-C Output (PD Compliant)
5. USB-A Outputs (×2)
6. Work Lights (×2)
7. Work Light Power Button
8. Surge Protection Indicator
9. Grounded Input Indicator
10. Mounting Locations (×4)
11. Magnets (×4)
12. Mounting Location Guide (see the last page)

OPERATING INSTRUCTIONS

NOTE: Grounded Input Indicator 9 will illuminate when an active ground is present on AC supply.
NOTE: Surge Protection Indicator 8 will illuminate when the unit is surge protected.
Plug the AC Power Cord 1 into a functional standard U.S. 120V
AC receptacle to supply power to the unit.
Use the AC Power Switch 2 to supply power to the AC Outlets 3 and USB ports 4, 5.
LED Work Lights 6 are activated by pressing the Work Light Power Button 7.

MOUNTING INSTRUCTIONS

NOTE: Disconnect power when mounting the PowerBox1.
NOTE: When mounting by fastener or nail, use all four mounting locations 10.

1. Use the measurements on the Mounting Location Guide 12, or download the full-sized template at www.kleintools.com to mark the four Mounting Locations 10 of the PowerBox1, or utilize the magnets 11 to mount on a steel surface.
2. It is recommended to use a 10d nail or 8-32 machine screw with a head size less than 0.5″ (13 mm).

COMPLIANCE

FCC & IC COMPLIANCE
This device complies with part 15 of the FCC RULES and
Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

IC NOTICE TO CANADIAN USERS

IC Compliance Statement: This device complies with Industry Canada license- exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the device.

MAINTENANCE

CLEANING: Be sure the device is disconnected from all power sources and devices. Use a clean, dry, soft, lint-free cloth to wipe down the entire unit. Do not use abrasive cleaners or solvents.
STORAGE: Store in cool temperatures, mild humidity, and away from direct sunlight (See GENERAL SPECIFICATIONS). Leaving in a vehicle or other confined spaces in extremely hot temperatures can lead to a decrease in service life, overheating, or fire. Extreme cold temperatures below the specified storage range can also harm performance and service life. Keep away from corrosive chemicals and gases. After taking out of storage, inspect visually to make sure device and all accessories look satisfactory. Allow unit to return to ambient conditions before using.

WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE

Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance with
local regulations. Please see www.epa.gov or www.erecycle.org for additional information.

CUSTOMER SERVICE

KLEIN TOOLS, INC.
450 Bond Street, Lincolnshire, IL 60069
1-800-553-4676
customerservice@kleintools.com
www.kleintools.com
29601

Documents / Resources

| KALEN TOOLS 29601 PowerBox1 Magnetic Mounted Power Strip [pdf] Instructions
29601, PowerBox1 Magnetic Mounted Power Strip
---|---

References

• U.S. Environmental Protection Agency | US EPA
• Electronic Waste Management - CalRecycle Home Page

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>