EPOS IMPACT DW Office Phone Convertible Wireless DECT Headset Instructions
- June 6, 2024
- EPOS
Table of Contents
SENNHEISER
IMPACT DW Series
IMPACT DW Office Phone | IMPACT DW Offi ce ML | IMPACT DW Offi ce USB ML
IMPACT DW Pro 1/Pro 2 | IMPACT DW Pro 1/Pro 2 Phone | IMPACT DW Pro 1/Pro 2
USB ML
Specifications
Headset
DW Office – HS | DW Pro 1/Pro 2 – HS
Dimensions
(W x H x D)
DW Office – HS:
140 x 24 x 22 mm /
5.51 x 0.95 x 0.87 in
DW Pro 1/Pro 2 – HS:
170 x 175 x 55 mm /
6.69 x 6.89 x 2.17 in
Weight
DW Office – HS:
Weight with…
Ear hook: 22 g / 0.78 oz / 0.049 lbs
Headband: 50 g / 1.76 oz / 0.11 lbs
DW Pro 1 – HS:
65 g / 2.29 oz / 0.14 lbs
DW Pro 2 – HS
85 g / 3.00 oz / 0.19 lbs
Talk time
Narrowband: up to 12 hours
Wideband: up to 8 hours
Charging time
50%: approx. 20 min
100%: approx. 1 hour
Range (environment
dependent)
Free line of sight:
up to 180 m / 590 ft
in office buildings:
up to 55 m / 180 ft
Speaker type
Dynamic, neodymium magnet
Microphone type
Electret microphone,
noise canceling
Base station
DW BS ML | DW BS USB ML | DW BS PHONE
Dimensions
(W x H x D)
108 x 116 x 114 mm /
4.24 x 4.57 x 4.49 in
Weight
DW BS ML:
368 g / 13.62 oz / 0.81 lbs
DW BS USB ML/DW BS Phone:
322 g / 11.36 oz / 0.71 lbs
Base station and Headset
DECT frequency range
EU: 1880 MHz – 1900 MHz
USA: 1920 MHz – 1930 MHz
RF output power
EU: max. 250 mW (EIRP)
US: max. 110 mW (EIRP)
Temperature range
Operation: +5 °C to +45 °C / +41 °F to +113 °F
Storage: -20 °C to +70 °C / -4 °F to +158 °F
Power supply unit
UNI PS EU/UK/AUS/US 01
Nominal input voltage
100 – 240 V~
Nominal input current
max. 0.2 A
Mains frequency
50 – 60 Hz
Nominal output voltage
5.9 V DC
Nominal output current
max. 850 mA
Temperature range
Operation: ion: +5 °C to +45 °C / +41 °F to +113 °F
Storage: -20 °C to +70 °C / -4 °F to +158 °F
Relative humidity
operation: 20 to 85%
storage: 20 to 95%
Weight
approx. 75 g / 2.65 oz / 0.17 lbs
Statements regarding FCC and Industry Canada
This device complies with Part 15 of the FCC rules and Innovation, Science and
Economic Development Canada’s license-exempt RSS.
Operation is subject to the following two conditions:
- This device may not cause harmful interference; and
- This device must accept any interference, including interference that may
cause undesired operation of the device.
Changes or modifications made to this equipment not expressly approved by the manufacturer may void the FCC authorization to operate this equipment.
The device complies with FCC / Innovation, Science and Economic Development Canada’s RF radiation exposure limits set forth for an uncontrolled environment. Use of other accessories not verified by the manufacturer may not ensure compliance with FCC / Innovation, Science and Economic Development Canada’s RF exposure guidelines. These transmitters must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment has been tested and found to comply with the limits for a Class B digital device of the FCC Rules, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in an installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
RF Radiation Exposure Information
The device complies with FCC and Innovation, Science and Economic Development
Canada RF radiation exposure limits set forth for an uncontrolled environment.
The base station should be installed and operated with a minimum distance of
20 cm between the radiator and your body. Use of other accessories not
verified by the manufacturer may
not ensure compliance with FCC/ISED RF exposure guidelines. These transmitters
must not be co-located or operated in conjunction with any other antenna or
transmitter.
In compliance with:
Model: DW 10 HS (DW Office HS), DW 20 HS (DW Pro 1 HS),
DW 30 HS (DW Pro 2 HS)
SCDB10 (DW BS ML – EU/UK/AUS,
DW BS USB ML – EU/UK/AUS, DW BS PHONE – EU/UK/AUS)
EU|
---|---
UK|
Australia/New Zealand|
Singapore|
Russia|
Model:
DW 10 HS (DW Offi ce HS), DW 20 HS (DW Pro 1 HS),
DW 30 HS (DW Pro 2 HS), SCDB9 (DW BS ML – US)
USA| FCC ID: R3USCDB9 (base station)
FCC ID: R3UD10HS (headset)
Canada| IC: 2099D-SCDB9 (base station)
IC: 2099D-TDH1 (headset)
CAN ICES-3 (B)/NMB-3 (B)
The compliance markings can be found under the headset earpad.
Responsible party
Demant Sound USA, Inc.
Little Falls Drive, Wilmington 19800, New Castle, USA
Tel: +1 800-332-7439
DSEA A/S
Kongebakken 9, DK-2765 Smørum, Denmark, www.eposaudio.com, Printed in China,
03/21, 770-00264/A05