EPOS DSBT1 BTD800a Bluetooth Dongle User Manual
- June 5, 2024
- EPOS
Table of Contents
EPOS DSBT1 BTD800a Bluetooth Dongle
Specifications
- Dimensions (W x H x D): 22 x 16 x 6 mm / 0.87 x 0.63 x 0.24 in
- Weight: 2.3 g / 0.005 lbs / 0.08 oz
- Temperature range
- Operation: +10°C to +40°C / +50°F to +104°F
- Storage: -20°C to +60°C / -4°F to +140°F
- Relative humidity
- Operation: 20 to 85%
- Storage: 10 to 95%
- Bluetooth: version 5.2 / class 1
- Bluetooth Range: up to 25 m (device dependent)
- Bluetooth frequency range: 2402 – 2480 MHz
- Output power: max. 8.5 dBm (EIRP)
Statements regarding FCC and Industry Canada
This device complies with Part 15 of the FCC rules and with Industry Canada license-exempt RSS standard(s). Operation is subjected to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device of the FCC Rules, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
- Changes or modifications made to this equipment not expressly approved by the manufacturer may void FCC authorization to operate this equipment.
RF Radiation Exposure Information
The device complies with FCC and Innovation, Science and Economic Development Canada’s RF radiation exposure limits set forth for an uncontrolled environment. Use of other accessories not verified by the manufacturer may not ensure compliance with FCC/Innovation, Science and Economic Development Canada’s RF exposure guidelines. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. These transmitters must not be co-located or operated in conjunction with any other antenna or transmitter.
Responsible party
Demant Sound USA, Inc.
Little Falls Drive, Wilmington 19800, New Castle, USA
Tel: +1 800-332-7439
DSEA A/S
Kongebakken 9, DK-2765 Smørum , Denmark
www.eposaudio.com