emerio FH-215060 Fan Heater PTC Instruction Manual
- June 6, 2024
- emerio
Table of Contents
FH-215060 Fan Heater PTC
Instruction Manual
Instruction
Thank you very much for purchasing our products. In order to ensure correct
operation, please read this manual and instructions carefully before use.
This product is only suitable for well-insulated spaces or occasional use.
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, burns and other injuries.
- Read and save these instructions. Attention: pictures in the IM is for reference only.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- Children of less than 3 years should be kept away unless continuously supervised.
- Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
- CAUTION – Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
- This appliance is intended to be used in households and similar applications.
- WARNING: In order to avoid overheating, do not cover the heater.
- The heater must not be located immediately below a socket outlet.
- Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
- Make sure the appliance is in good condition after removing it from the package.
- Check your mains voltage; it must match the specification of this heater.
- Check the power cord and plug carefully before use to ensure that they are not damaged.
- Be sure the power is turned off before unplugging the heater. Do not touch the plug with wet hands.
- Don’t cover the heater.
- Don’t allow moisture and dust to enter the appliance. Don’t use this heater in bathrooms or laundry. Store it in dry areas.
- Don’t put the heater on soft surfaces such as beds or sofas.
- Children must not play with or plug in the heater. Keep children away from the package. Polyethylene bags can be dangerous.
- If an extension cord is used it must be suited to the power consumption of the appliance, otherwise overheating of the extension cord and/or plug may occur. There is a potential risk of injuries from tripping over the extension cord. Be careful to avoid dangerous situations
- Indoor use only.
- Do not allow the power cord to hang (e.g over the edge of a table or counter) or place/run the power cord under rugs, carpeting, or in high-traffic areas where it may be ripped over or pulled.
- Do not plug or unplug the appliance from the electrical outlet with a wet hand.
- Do not put any stress on the power cord where it connects to the appliance, as the power cord could fray and break.
- Keep the power cord and product always away from heated surfaces.
- Do not insert any other objects into the heater, as it may cause an electric shock, fire or damage to this appliance.
- Do not use this appliance to dry or heat clothing, shoes, pipes or any other items.
- Use the appliance in a well-ventilated area, this heater is hot when in use, to avoid burns, do not let bare skin touch a hot surface, if provided, use a handle when moving this heater, keep combustible materials, such as furniture pillows, bedding, paper, clothes, and curtains at least 3 feet ( 0.9 meters) from all sides of the heater.
- Use this heater only as described in the manual, any other use not recommended by the manufacturer may cause fire, electric shock or personal injury.
- Do not operate the heater with a damaged cord or plug. After the heater malfunctions or has been dropped or damaged in any manner, return the appliance to a service facility for examination, electrical or mechanical adjustment, or repair.
- The appliance should not be operated by means of an external timer switch or by means of a separate system with remote control not originally belonging to this appliance.
- This heating device is not suitable for assembling vehicles and machines.
- This appliance is not a toy.
- Do not immerse the unit in water.
- To avoid the risk of fire or electric shock do not remove the housing.
- Any servicing other than cleaning and user maintenance should be performed by an authorized service representative only.
- Means “DO NOT COVER “.
PARTS DESCRIPTION
- Power switch
- Air outlet
- Air inlet
- LED screen
- Control panel
- Handle
Control panel and LED screen
a. LED screen
b. On/standby button
c. Temperature/timer decrease button
d. Temperature/timer increase button
e. Mode button
Remote control
-
This unit has a remote control. One piece of CR2025 battery will be provided with the remote control.
-
Before starting to use the remote control, remove the plastic protection from the battery.
-
If you want to change the battery, please make the arrow mark on the battery cover point at the logo “unlock” and take off the battery cover (You can use a suitable object such as a coin to fit the dent and turn the cover.). Take out the old battery and put in the new battery. Replace the battery cover and turn it until it’s locked as the drawing below shows (the arrow mark pointed at the short line below the logo “lock”).
-
If it is not in use for a long time, please take the battery out of the remote control.
-
The functions of buttons on the remote control are the same as that on the control panel of the appliance, except the button is used for the timer setting, while on the control panel, you need to long-press the – 6 -mode button for about 5 seconds to enter the timer setting.
OPERATION
- Plug the appliance into an appropriate electrical outlet.
- Press the power switch to the position “I” to connect the power.
- Press the on/standby button to start the appliance. The LED screen shows the room temperature. The appliance works in default setting — cool airflow (no heating). Now the mode button is displayed in blue color.
- Press the mode button once, the appliance works in low heating (in half power 750W, the mode button displayed in orange color); press the mode button again, the appliance works in high heating (in full power 1500W, the mode button displayed in red color); press the mode button the third time, the appliance will go back to the cool airflow and the mode button is displayed in blue again. These three settings are cycled with each press of the mode button.
- To set the desired temperature, press the button “+”/ “-” to select among the range 10-35. The default setting is 25. In heating mode, the appliance will automatically maintain the set temperature. It will start working when the room temperature is 2 below the setting, and stop working when the room temperature is above the setting.
- In order to set the timer, long-press the mode button on the control panel for about 5 seconds, or simply press the button on the remote control. Press the button “+”/ “-” to select a numeral (24). It means in how many hours (s) the appliance will turn into standby automatically. For example, you select a numeral as “2”, then the appliance will go into standby automatically in 2 hours. The selected numeral will flash for several seconds, and then the LED screen shows back to the room temperature. The timer is settled. To cancel the timer, just set the numeral as “0”.
- When it is in operation, press the on/standby button to turn the appliance into standby. If the appliance has worked before with the heating function, its fan keeps working for 30 seconds with a countdown on the display.
- After use, press the power switch to the position “O” to switch off the appliance.
SAFETY SYSTEM
- The appliance has a safety system that automatically switches off the unit when overheated.
- If overheating occurs, switch off the appliance, remove the plug from the socket, and let it cool down for at least 30 minutes. Put the plugin in the socket and switch on the heater.
- This heater is equipped with a tilt protection safety device. For safety reasons, the unit will automatically switch off the power if it is put on an unstable or uneven surface or if it is tilted accidentally.
MAINTENANCE
- The fan heater only needs regular cleaning on the outside.
- Before you clean the appliance, press the power switch to the position “O” to switch off the appliance. Remove the plug from the socket and wait until the fan heater cools down completely.
- Use a damp cloth to wipe the heater housing.
- Do not use detergents, abrasive cleaning liquids or chemicals (alcohol, gasoline etc.) to clean the appliance.
TECHNICAL DATA
- Operating voltage: 220-240V ~ 50/60Hz
- Power consumption: 1500W
GUARANTEE AND CUSTOMER SERVICE
Before delivery, our devices are subjected to rigorous quality control. If,
despite all care, the damage has occurred during production or transportation,
please return the device to your dealer. In addition to statutory legal
rights, the purchaser has an option to claim under the terms of the following
guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day
of sale. If you have a defective product, you can directly go back to the
point of purchase. Defects that arise due to improper handling of the device
and malfunctions due to interventions and repairs by third parties or the
fitting of non-original parts are not covered by this guarantee. Always keep
your receipt, without the receipt you can’t claim any form of warranty. Damage
caused by not following the instruction manual will lead to a void of
warranty, if this results in inconsequential damages then we will not be
liable. Neither can we hold responsible for material damage or personal injury
caused by improper use if the instruction manual is not properly executed?
Damage to accessories does not mean free replacement of the whole appliance.
In such case please contact our service department. Broken glass or breakage
of plastic parts is always subject to a charge. Defects to consumables or
parts subjected to wearing, as well as cleaning, maintenance or the
replacement of said parts are not covered by the warranty and are to be paid.
ENVIRONMENT-FRIENDLY DISPOSAL
Recycling European Directive 2012/19/EU This marking indicates that this
product should not be disposed of with other household wastes. To prevent
possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take
this product for environmentally safe recycling.
ERP information
Supplier: Emerio International AB
Smedjegatan 6
131 54 Nacka
Sweden
Declare that the product detailed below:
Information requirements for electric local space heaters
Model identifier(s):
Item| Symbol| Value| Unit| Item| Unit
Heat output| | | | Type of heat input, for electric storage local space
heaters only (select one)|
Nominal heat output| Phnom| 2.| kW| manual heat charge control, with
integrated thermostat| No
Minimum heat output
(indicative)| Pam| Loo| kW| manual heat charge control with room
and/or outdoor temperature feedback| No
Maximum continuous heat output| Pmax.c| 2.| kW| electronic heat charge control
with room and/or outdoor temperature feedback| No
Auxiliary electricity consumption| | | | fan assisted heat output| No
At nominal heat output| elm.| N/A| kW| Type of heat output/room temperature
control (select one)
At minimum heat output| eln, in| N/A| kW| single-stage heat output and no room
temperature control| No
In standby mode| else| 0.00022| kW| Two or more manual stages, no room
temperature control| No
| | | | with mechanic thermostat room temperature control| No
| | | | with electronic room temperature control| Yes
| | | | electronic room temperature control plus day timer| No
| | | | electronic room temperature control plus week timer| No
| | | | Other control options (multiple selections possible)
| | | | room temperature control, with presence detection| No
| | | | room temperature control, with open window detection| No
| | | | with distance control option| Yes
---|---|---|---|---|---
| | | | with adaptive start control| No
| | | | with working time limitation| Yes
| | | | with black bulb sensor| No
Contact details| Emerio International AB Smedjegatan 6 131 54 Nacka Sweden
Satisfies the requirement of the Council Directives:
COMMISSION REGULATION (EU) No 2015/1188 of 28 April 2015 and Amending
COMMISSION REGULATION (EU) 2016/2282 implementing Directive 2009/125/EC of the
European Parliament and of the Council with regard to ecodesign requirements
for local space heaters
Regarding information for consumers on how to install, use and maintain the
product, WEEE information, please check the instruction manual provided with
packaging.