HEMA 80030039 100W Electric Heating Pad Instruction Manual

: June 6, 2024
: Hema

HEMA 80030039 100W Electric Heating Pad

HEMA-80030039-100W-Electric-Heating-Pad

Technical specifications

Supply voltage: 220-240 V ~ 50 Hz
Power consumption: 100 watt
Type: HP210
2 year full HEMA warranty
100% polyester
42 x 32 cm
Can be washed at max. 30°C

Replace an electric blanket after about 10 years or earlier if the condition of the electric blanket warrants it.

SAFETY INSTRUCTIONS

Before use make sure to read all of the below instructions in order to avoid injury or damage, and to get the best results from the appliance. Make sure to keep this manual in a safe place. If you give or transfer this appliance to someone else make sure to also include this manual. In case of damage caused by user failing to follow the instructions in this manual the warranty will be void. The manufacturer/importer accepts no liability for damages caused by failure to follow the manual, a negligent use or use not in accordance with the requirements of this manual.

Important instructions. Retain for future use.
The appliance is not to be used by young children over the age of three unless the controls have been pre-set by a parent or guardian, or unless the child has been adequately instructed on how to operate the controls safely
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
When the appliance is likely to be used for an extended period, for instance by the user falling asleep, controls should be adjusted to a setting recommended for continuous use.
If you will use it for a long period of time, please press the temperature setting button until the digital display shows “1” (the lowest temperature setting) so as to avoid overheating which may cause human body’s discomfort.
The appliance is only to be used with the detachable control unit KS6 that are marked on the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
When storing the appliance, allow it to cool down before folding.
Do not crease the appliance by placing items on top of it during storage.
Examine the appliance frequently for signs of wear or damage. If there are such signs, if the appliance has been misused or does not work, return it to the supplier before switching it on again.
This appliance is not intended for medical use in hospitals.
Do not use if wet
This appliance must not be used by persons insensitive to
heat and other very vulnerable persons who are unable to react to overheating.
Children under the age of three are not to use this appliance due to their inability to react to overheating.
Do not immerse the appliance or the mains plug in water or other liquids. There is danger to life due to electric shock!
Never leave the appliance unattended during use.
Do not use the appliance for other than intended use.
Make sure that you do not fall asleep during use. If you become very tired during use, select setting 1 for safety.
Examine the appliance frequently for signs of wear or damage. If there are such signs or if the appliance has been misused, return it to the supplier prior to any further use.
The switch or control unit must not be allowed to get wet during washing and during drying the cord must be positioned to ensure that water does not flow into the switch or control unit.
It is not suitable for use in hospitals, clinics, etc.
The heating pad is not a medical product
Do not use with a helpless person, an infant or a person insensitive to heat.
When not in use, please follow the instructions of below paragraph of the manual.

SYMBOL EXPLANATION

| Read the instructions for use
---|---
| Do not bleach
| Do not tumble dry
| Do not iron
| Do not dry clean
| Do not inset pins
| Do not use folded or rucked
| Not to be used by very young children (0-3 years)
| Maximum washing temperature 30°C, mild process.

PARTS DESCRIPTION

Heating pad
Pad cover
Controller
a. Digital display
b. On/off button
c. Temperature setting button
Connection socket of the heating pad to the power cord
Connection plug of the power cord to the heating pad

USING THE HEATING PAD

Ensure there is a mains supply nearby and that when in use, the power cord will not be in a position that could cause people to trip over it. When plugged into the mains supply, the controller must be within easy reach of the user. Make sure the connection plug of the power cord is firmly attached to the connection socket of the heating pad.

Press the on/off button for 3 seconds to start the appliance. The digital display shows the temperature setting “3”.
Press the temperature setting button to select your desired temperature setting from 1 to 6 (low to high) according to your body’s feeling.
If you will use it for a long period of time, please press the temperature setting button until the digital display shows “1” (the lowest temperature setting) so as to avoid overheating which may cause human body’s discomfort.
After use, press the on/off button for 3 seconds to shut off the appliance. Unplug the heating pad from the mains socket.

Note:

Please preheat the appliance before use by setting the temperature to “6” (the highest temperature setting) for 10 minutes.
After working 90 minutes the heating pad switches off automatically.

After use

When the heating pad is not in use please switch off the appliance and remove the plug from the power socket. Always pull on the plug, not on the mains cord. If the heating pad is not to be used for a long period of time, store the heating pad in a cool and dry place.

Note
This heating pad is supplied with a pad cover for easy cleaning. You can use the heating pad directly or cover with the pad cover while using. If the pad cover is to be used, please make sure the connection socket of the heating pad will face towards the opening side of the pad cover.

Attention

a. If display is “P”, please check whether the coupler (Fig.1) of the product has been connected firmly or not, then restart it. If the fault cannot be removed, it means the internal connection of the product has problems and it needs to ask help from after sales service. b. If display is “E”, it means the product has been broken.

WARNING – risk of burns

Prolonged use at the highest setting may lead to burns.
To avoid burn injuries to the skin, test the temperature prior to use with the back of your hand (not the palm, as this is less sensitive than other parts of the body).
Do not use the heating pad directly on your skin.

CLEANING AND STORAGE

Remove the mains plug from the wall socket and the connection plug from the connection socket on the device before cleaning the heating pad.
Neither control unit nor mains cord can come into contact with moisture, water or any other liquid. Otherwise, there is a danger of electric shock. In addition, the heating pad itself must not be moist during use. Only use it when it is dry – never when damp!
The heating pad and the pad cover can be washed in the washing machine (without the cord and controller). Set the machine to wool or delicate wash at a maximum water temperature of 30 degrees. After washing, spread them over a drying rack or clothes line to dry thoroughly.
Let the heating pad cool down before folding it up!
Do not place any heavy objects on the heating pad
The heating pad must not be creased!
Always store the heating pad in a cool, dry place where it is protected from other sources of heat!

RECYCLING

This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the environment and human heath due to the presence of hazardous substances.

QUALITY

Safety and quality is very important to HEMA. We have our own laboratory, which assesses all equipment in terms of electrical safety and ease of use, before it is included in our range. HEMA also monitors the product quality in collaboration with the manufacturer.

SECURITY

This HEMA item may be fitted with a plastic anti-theft strip. You will find the strip on the bottom of the product. This strip does not influence the quality or the operation of the product and can be removed without a problem.

FAULTS AND REPAIRS

If this device needs to be repaired, you can hand it in at a HEMA branch after packing the product securely. Do not try to repair this product yourself. For repairs that fall within the warranty period, you will need to show a proof of purchase and the warranty document. Regularly check the power cord for damage. If there is any damage to the cord set, please return the item to a HEMA branch for repair. Do not try to replace it yourself. For safety reasons we recommend that you do not carry out any repairs to an electrical device yourself.

WARRANTY

The warranty period is 2 years from the date of purchase. Always keep your receipt in a safe place. It’s handy if you take a picture of the receipt and save it somewhere. Then you will always have an easy-to-read receipt in your possession.

WARRANTY CONDITIONS

HEMA quality guarantee

HEMA guarantees that the product you have purchased meets the standards our customers are entitled to expect in terms of quality and product properties. These warranty conditions do not affect your statutory or consumer rights and apply in all countries where there are HEMA branches.

Warranty claims

If you wish to make a warranty claim, please return the product with proof of purchase to one of our stores. The store will determine whether to replace the product (with an identical or equivalent product), accept the product for repair within a reasonable period of time or refund the price of the product.

Invalidation of warranty

The warranty on this article is invalidated if the fault or defect is caused by: a) normal wear and tear b) external damage (for example, damage caused by exposure to sand or moisture or due to falling of the product, etc.) c) improper or inappropriate use d) overdue or incorrect maintenance, including repairs that were not authorised by HEMA The above list does not exclude other possible reasons for defects not being covered by the warranty.