HEMA 39680068 Projection Lamp Instruction Manual
- June 5, 2024
- Hema
Table of Contents
HEMA 39680068 Projection Lamp
INSTRUCTIONS
Read and follow all of the instructions and safety precautions below before
using this product. Keep the manual for future reference.
In very rare cases, a person may have an epileptic seizure in everyday life
caused by flashing lights or patterns. This lamp also causes flashing light.
Please bear this in mind when considering using this lamp. Consult your doctor
before use if you have epilepsy or have ever had an epileptic seizure. Consult
your doctor immediately if you experience any of the following while using
this lamp: changed vision, eye or muscle twitches, mental confusion or
disorientation, loss of awareness of surroundings, or involuntary movements.
Technical Specifications
- Four AAA batteries (not included)
- Input: DC5V
- Material: ABS, PVC, PC
- Article dimensions: 130x130x100mm
- Weight:248g
Package contents
- 1x projection lamp
- 1x starry sky slide
- 1x ocean slide
- 1x USB cable
- 1x manual
Precautionary measures and safety instructions
- Do not expose this product to any heat sources (including fire or direct sunlight).
- Do not expose this product to water or liquids.
- Do not disassemble or modify this product.
- Do not drop this product (and avoid other severe impacts that may damage its internal circuitry).
- Do not allow children to charge the batteries. Do not leave removed batteries lying around.
- Please note: Always use the batteries and the USB cable separately.
Instructions
- This lamp runs on four AAA batteries (not included) or by connecting the supplied USB cable to a computer or laptop, or via an adapter (max 5V) to the power supply.
- For use with batteries: Open the cover on the bottom with a crosshead screwdriver and insert the four AAA batteries correctly. Only insert four equal batteries into the battery compartment. Then switch on the lamp using the on/off button (on the right) on the side of the lamp. A small blue light will come on. When replacing batteries, always replace all batteries at the same time. Remove all batteries from the battery compartment if the LED light won’t be used for a longer period of time.
- For use with the USB cable: Plug the cable into the lamp and connect the USB output to a computer or laptop or to the power supply using an adapter (max. 5V). Then switch on the lamp using the on/off button (right) on the front of the lamp.
- To use the lamp as a projector: Remove the cover from the top and place one of the projection slides (starry sky or ocean) in the holder. To do this, first place the desired slide in the white ring. Place the slide on the lamp and tighten the ring counter-clockwise. To change the slide, unscrew the ring clockwise and remove the slide with ring from the lamp. Remove the slide from the ring by gently pressing on the tabs and remove the slide from the ring along the bottom. Replace the other slide in the same way. Make sure that the three recesses on the edge meet the tabs. Press the centre button to set the colour and light pattern. Press the left button to turn the lamp.
- To use the lamp as a normal lamp: Remove the printed covers and place the top back on the lamp. Press the left button twice. The lamp will emit a white light. A different light pattern can be selected by pressing the centre button.
Maintenance
- Keep the LED light away from water or other liquids.
- Clean the LED light with a damp cloth. Do not use any chemicals or detergents.
- Only use the LED light at normal ambient temperatures (0 to 45 °C).
Quality
Safety and quality are very important to. We have our own laboratory, which assesses all equipment in terms of electrical safety and ease of use, before it is included in our range. also monitors the product quality in collaboration with the manufacturer.
Recycling
product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances.
Faults and repairs
If this device needs to be repaired, you can hand it in at a branch after packing the product securely. Do not try to repair this product yourself. For repairs that fall within the warranty period, you will need to show a proof of purchase and the warranty document. Regularly check the power cord for damage. If there is any damage to the cord set, please return the item to a branch for repair. Do not try to replace it yourself. For safety reasons we recommend that you do not carry out any repairs to an electrical device yourself.
Warranty conditions
Quality guarantee
guarantees that the product you have purchased meets the standards our
customers are entitled to expect in terms of quality and product properties.
These warranty conditions do not affect your statutory or consumer rights and
apply in all countries where there are branches.
Warranty claims
If you wish to make a warranty claim, please return the product with proof of
purchase to one of our stores. The store will determine whether to replace the
product (with an identical or equivalent product), accept the product for
repair within a reasonable period of time or refund the price of the product.
Invalidation of warranty
The warranty on this article is invalidated if the fault or defect is caused
by:
- normal wear and tear
- external damage (for example, damage caused by exposure to sand or moisture or due to falling of the product, etc.)
- improper or inappropriate use
- overdue or incorrect maintenance, including repairs that were not authorised by.
The above list does not exclude other possible reasons for defects not being covered by the warranty.
Added confidence when choosing a product
You may swap or return the product within 30 days after purchase (provided
it is undamaged and you have proof of purchase).
PO Box 37110 – 1030 AC Amsterdam – Netherlands