MONOGRAM ZGU366NPSS 36 Inch Professional Gas Rangetop with 6 Burners Owner’s Manual

OWNER’S MANUAL

36″ and 48″ Professional Rangetop
MONOGRAM.COM

MODEL INFORMATION

MODEL NUMBERS
ZGU366, ZGU364, ZGU486

WRITE DOWN THE MODEL AND SERIAL NUMBERS
You’ll find them on a label located behind the left burner a knob or below the control panel.

Use these numbers in any correspondence or service calls concerning your appliance.

Please write these numbers here:
Model Number:———————————–
Serial Number;————————————

CONSUMER SUPPORT

MONOGRAM WEBSITE
Have a question or need assistance with your appliance? Try the Monogram website 24 hours a day, any day of the year! You can also shop for more great Monogram products and take advantage of all our online support services designed for your convenience.
In the US: monogram.com .
In Canada : monogram.ca

REGISTER YOUR APPLIANCE
Register your new appliance online at your convenience! Timely product registration will allow for enhanced communication and prompt service under the terms of your warranty, should the need arise. You may also mail in the pre-printed registration card included in the packing material.
In the US: monogram.com/register.
In Canada: monogram.ca

SCHEDULE SERVICE
Expert Monogram repair service is only one step away from your door.
To request service in the US, visit our website at monogram.com/contact or call 800.444.1845 In Canada: monogram.caor 888.880.3030

REMOTE CONNECTIVITY
For assistance with wireless network connectivity (for models with remote enable), visit our website at monogram.com/connect

PARTS AND ACCESSORIES
Individuals qualified to service their own appliances can have parts or accessories sent directly to their homes (VISA, MasterCard, and Discover cards are accepted). Order online today 24 hours every day.
In the US: monogram.com/ownership/parts or call 800.444.1845

Instructions contained In this manual cover procedures to be performed by any user. Other servicing generally should be referred to qualified service personnel. Caution must be exercised, since improper servicing may cause unsafe operation.

Canadian customers should check with the Mabe service center, visit our website at monogram.ca or 800.661.1616.

CONTACT US

If you are not satisfied with the service you receive from Monogram, contact us on our website with all the details including your phone number at monogram.com/contact.

IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING THE

APPLIANCE

WARNING If the information in this manual is not followed exactly, a fire or explosion may result, causing property damage, personal injury, or death.
– Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
– WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s
• If you cannot reach your gas supplier, call the fire department.

–  Installation and service must be performed by a qualified installer, service agency, or gas supplier.

WARNING Read all safety instructions before using the product. Failure to follow these instructions may result in fire, electrical shock, serious injury, or death.

WARNING

GENERAL SAFETY INSTRUCTIONS

WARNING NEVER use this appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning.

• Use this appliance for its intended purpose as described in this owners
• Have your range top installed and properly grounded by a qualified installer in accordance with the provided installation instructions.
• Any adjustment and service should be performed only by a qualified gas range top installer or service technician. Do not attempt to repair or replace any part of your range top unless it is specifically recommended in this
• Your range top is shipped from the factory set for use with natural gas or propane (LP) gas. It can be converted for use with If required, these adjustments must be made by a qualified technician in accordance with the installation instructions and local codes. The agency performing this work assumes responsibility for the conversion.
• Have the installer show you the location of the range top gas shut-off valve and how to turn it off if necessary.
• Plug your range top into a 120-volt grounded outlet Do not remove the round grounding prong from the plug. If in doubt about the grounding of the home electrical system, it is your responsibility and obligation to have an ungrounded outlet replaced with a properly grounded, three-prong outlet in accordance with the National Electrical Code. Do not use an extension cord with this appliance.
• Before performing any service, unplug the range top or disconnect the power supply at the household distribution panel by removing the fuse or switching off the circuit
• Be sure all packing materials are removed from the range top before operating to prevent the ignition of these
• Avoid scratching or impacting glass Doing so may lead to glass breakage. Do not cook on a product with broken glass. Shock, fire, or cuts may Occur.

READ AND SAVE THESE INSTRUCTIONS

• Do not leave children alone or unattended in an area where an appliance is in use They should never be allowed to climb, sit or stand on any part of the appliance.

• CAUTION   Do not store items of interest to children in cabinets above a range top – children climbing on the range top to reach items could be seriously injured.

• Never block the vents (air openings) of the range top. They provide the air inlets and outlets that are necessary for the range top to operate properly with correct combustion. Air openings are located at the rear of the range top.

• Use only dry potholders—moist or damp potholders on hot surfaces may result in burns from steam. Do not let potholders touch surface burners or burners Do not use a towel or other bulky cloth in place of potholders.

• Do not touch the heating elements. These surfaces may be hot enough to burn even though they are dark in color. Other surfaces of the appliance may become hot enough to cause burns. Potentially hot surfaces include the burners, grates, high shelf surfaces.

• Do not heat unopened food containers. Pressure could build up and the container could burst, causing an injury.

• Cook food thoroughly to help protect against foodborne illness Minimum safe food temperature recommendations can be found on the surface.

IsltDoneYet.gov and fsls.usda.gov . Use a food thermometer to take food temperatures and check several locations.

• Do not allow anyone to climb, stand or hang on the They could damage the appliance.
• Keep the ventilator hood and grease filters clean to maintain good venting and to avoid grease fires. Turn the ventilator OFF in case of a fire or when intentionally “flaming” liquor or other spirits on the blower if in operation, could spread the flames.

WARNING
KEEP FLAMMABLE MATERIALS AWAY FROM THE RANGE TOP
Failure to do so may result In a fire or personal injury.

• Do not store or use flammable materials on the range top, including paper, plastic, pot holders, linens, wall coverings, curtains, drapes, gasoline, or other flammable vapors and liquids.
• Never wear loose-fitting or hanging garments while using the appliance. These garments may ignite if they contact hot surfaces causing severe burns.
• Do not let cooking grease or other flammable materials accumulate in or near the range top Grease on the range top may ignite.

WARNING
IN THE EVENT OF A FIRE, TAKE THE FOLLOWING STEPS TO PREVENT INJURY AND FIRE FROM SPREADING

• Do not use water on grease fires. Never pick up a flaming pan. Turn the controls off. Smother a flaming pan on a surface unit by covering the pan completely with a well-fitting lid, cookie sheet, or flat tray. Use a multi-purpose dry chemical or foam-type fire extinguisher.

WARNING
RANGE TOP SAFETY INSTRUCTIONS

WARNING
NEVER Operate the Top Surface Cooking Section of this Appliance Unattended.

• Failure to follow this warning statement could result in fire, explosion, or burn hazards that could cause property damage, personal injury, or death.
• If a fire should occur, keep away from the appliance and immediately call your fire department.

DO NOT ATTEMPT TO EXTINGUISH AN OIL/GREASE FIRE WITH WATER.

• Never leave oil unattended while frying. If allowed to heat beyond its smoking point, the oil may ignite resulting in a fire that may spread to surrounding cabinets. Use a deep-fat thermometer whenever possible to monitor oil temperature.
• To avoid oil spillover and fire, use the minimum amount of oil when using a shallow pan-frying and avoid cooking frozen foods with excessive amounts of ice.
• Use proper pan size and avoid pans that are unstable or easily tipped. Select cookware that is matched to the size of the burner. Burner flames should be adjusted so that they do not extend beyond the bottom of the pan. Excessive flame may be hazardous.
• Always use the LITE position when igniting the top burners and make sure the burners have ignited.
• When using glass/ceramic cookware, make sure it is suitable for cooktop service; others may break because of a sudden change in temperature.
• To minimize the possibility of burns, ignition of flammable materials, and spillage, the handle of a container should be turned toward the center of the range without extending over nearby burners.
• Do not use a wok with a round metal support ring. The ring may trap heat and block air to the burner resulting in a carbon monoxide hazard.
• Do not attempt to lift the cooktop. Doing so may damage the gas tubing to the surface burners resulting in a gas leak and risk of fire.
• Do not use aluminum foil to cover the grates or line any part of the cooktop. Doing so may result in carbon monoxide poisoning, overheating of the cooktop surfaces, or a potential fire hazard.

How to Remove Protective Shipping Film and Packaging Tape

Carefully grasp a corner of the protective shipping film with your fingers and slowly peel it from the appliance surface. Do not use any sharp items to remove the film. Remove all of the films before using the appliance for the first time.

To assure no damage is done to the finish of the product, the safest way to remove the adhesive from packaging tape on new appliances is an application of a household liquid dishwashing detergent. Apply with a soft cloth and allow to soak.

NOTE: The adhesive must be removed from all parts. It cannot be removed if it is baked on.

USING THE RANGE TOP

FEATURES
(Not all features are on all models. Appearance may vary.)

| Feature Index| Page
---|---|---
1| Griddle Cover (on some models)|
2| Griddle Grease Trough (on some models)| 14
3| Griddle (on some models)| 10, 11, 14
4| Cooktop Burner Grates| 10, 14
5| Burner Location Indicator|
6| Accent Lighting Control| 8
7| Burner Control Knob with Lighted Bezel| 8, 9, 12

ACCENT LIGHTING CONTROL

This button controls the LED accent lighting to the control panel. Custom color options for the knob and task lighting are available through the app.

• LED Accent light ON
• LED Accent light ON and knob lights ON
• All OFF

IN CASE OF A POWER FAILURE
In the event of a power failure. The surface burners may be lit with a match. Using extreme caution, hold a lit match near the ports beneath the surface burner cap, then slowly turn the knob to the LITE position. Once lit, surface burners will continue to operate normally.

SURFACE BURNERS

Lighting a Surface Burner

WARNING
Burners should be operated only when covered by cookware. Burner flames not covered by cookware present a risk of fire or clothing ignition. Never let flames extend beyond the sides of the cookware. Failure to comply may result in serious injury.

Make sure all burners are in their correct locations and fully assembled before attempting to operate any burner.
Select a burner and find its control knob. Push the knob in and turn it to the LITE position.
You will hear a clicking noise—the sound of the electric spark igniting the burner. When one burner is turned to LITE, all burners will spark. Sparking will continue as long as the knob remains at LITE. Once the gas is ignited, turn the knob to adjust the flame size.

Automatic Reignition
The burners on this range will automatically relight if the flame goes out.

Selecting a Flame Size

Watch the flame, not the knob, as you adjust the heat. When rapid heating is desired, the flame size should match the size of the cookware you are using. Flames larger than the bottom of the cookware will not heat faster and may be hazardous.

Using the Surface Burners

NOTES:

• Do not operate the burner for an extended period of time without cookware on the grate. The finish on the grate may discolor or chip without cookware to absorb the heat.
• Do not attempt to disassemble any burner while another burner is on. Damage to the product may occur.
• Be sure the burners and grates are cool before you place your hand, a potholder, or cleaning materials on them.

Your range top has sealed gas burners that offer convenience, cleanability, and flexibility for a wide range of cooking applications.

USING THE RANGE TOP

SURFACE BURNERS (cont.)
Types of Surface Burners

Dual-Flame Stacked Burner:

Use this burner for general cooking purposes.
Size cookware appropriately to the flames.

Multi-Ring Burner:
Use this burner for large cookware or for simmering applications.
Dual-Flame Stacked Burners

Dual-Flame Stacked burners on your range have two sets of flames stacked one on top of the other; the dual-flame burners have a lower (simmer) flame and an upper (main)
flame.

When a burner is turned on, the lower flame will always light and stay on.

Simmering:
The stacked burner design provides a wide range of heat settings with which to simmer. Depending on the type and quantity of food, and pan size, the flame can be adjusted to
suit your specific need.

Cooking:
Settings from LO to MED will use both upper and lower flames. Use HI for larger diameter cookware. HI is intended to sear foods quickly and boil large quantities of water.

Dual-Stack burners are supplied with black enamel caps and brass inserts that sit in the center. The inserts may be removed depending on consumer preference.

Multi-Ring Burner

The Multi-Ring Burner has an inner and outer ring of flame. For large cookware, activate all rings by setting the burner between Hi and Med.
For small cookware or low heating applications, only activate the inner rings by setting the burner between Lo and Sim.

Multi-ring burners are supplied with both brass and black enamel caps, either can be used depending on consumer preference.

TOP-OF-RANGE COOKWARE

Aluminum: Medium-weight cookware is recommended because it heats quickly and evenly. Most foods brown evenly in an aluminum skillet. Use saucepans with tightfitting lids when cooking with minimum amounts of water.
Stainless Steel: This metal alone has poor heating properties and is usually combined with copper, aluminum, or other metals for improved heat distribution. Combination
metal skillets usually work satisfactorily if they are used with medium heat or as the manufacturer recommends.
Cast-Iron: If heated slowly, most skillets will give satisfactory results.

Enamelware: Under some conditions, the enamel of some cookware may melt. Follow the cookware manufacturer’s recommendations for cooking methods.
Glass: for oven use only and those for top-of-range cooking (saucepans, coffee, and teapots). Glass conducts heat very slowly.
Heatproof Glass Ceramic: Can be used for either surface or oven cooking. It conducts heat very slowly and cools very slowly. Check the cookware manufacturer’s directions
to be sure it can be used on gas ranges.

WOK COOKING

The burner grates are uniquely designed to cook on either side. The flat side accommodates flat bottom cookware (stockpots, saucepans, frying pans, and flat bottom woks),
while the wok side is designed to hold a wide variety of round-bottom woks from 14″ to 16″ without the need for a separate ring.
For easy access, a front-burner location is recommended for wok cooking.
The front left or right burner is recommended for wok cooking on 36″ and 48″ ranges and the left front on 30″ ranges.
WARNING Do not use a wok support ring. Placing the ring over the burner or grate may cause the burner to work improperly, resulting in carbon monoxide levels above allowable standards. This could be hazardous to your health.

WARNING Fire Hazard

• Use care when cooking greasy foods. Spilled grease may result in fire.
• Never place any items on the griddle when it is not in use. The heat from surrounding burners can heat the griddle and may result in fire.
• Place and remove the griddle only when the griddle is cool and all surface burners are turned OFF.

GRIDDLE SAFETY PRECAUTIONS, LEVELING (on some models)

Remove the metal cover before turning the griddle on. The griddle assembly should not be removed for cleaning. Once the unit is in position, the griddle can be leveled. Remove the flue cover by lifting it straight up. Be careful not to scratch the surrounding stainless steel surfaces during the removal of the flue cover.

The two inner screws are clamping screws for securing the griddle in place. Loosen these two screws before leveling. Do not remove these two screws. The two outer screws are leveling screws. Do not remove these two screws.

They can be turned to level the griddle or to provide a forward slope to help grease and oils to drain away from the food being cooked. After the first few uses, you will be able to judge the slope best suited for the foods you are cooking and your personal preference.

After leveling the griddle, tighten the clamping screws to secure the griddle in place. Hand tightens screws; do not over-tighten.

USING THE GRIDDLE

Clean the griddle thoroughly with hot soapy water before first use and after subsequent uses. The griddle surface is made of durable, highly polished Type 304 stainless steel backed by an aluminum plate for even heat distribution. Apply a light coating of cooking oil to the griddle surface to help prevent food from sticking.

To heat the griddle, push in and turn the control knob to the desired temperature setting. The light on the bezel will glow to indicate that the thermostat control is working.

The griddle is thermostatically controlled and can be set to maintain any temperature from 200°F to 450°F. Permit the griddle to preheat for 10 minutes before placing food on it.

NOTE: Unlike the surface burners which use spark igniters, the griddle uses a Glo-Bar for ignition. Gas flows to the griddle burner and ignition occur approximately 45 seconds after the control knob is turned to a set temperature.

*NOTE: Place bacon on a cold griddle. Do not preheat.

CARE AND CLEANING

Be sure electrical power is off and all surfaces are cool before cleaning any part of the range

CONTROL PANEL AND KNOBS

It’s a good idea to wipe the control panel after each use. Clean with mild soap and water or vinegar and water, rinse with clean water, and polish dry with a soft cloth. Do not use abrasive cleansers, strong liquid cleaners, plastic scouring pads, or oven cleaners on the control panel because they will damage the finish.

For easier cleaning, the control knobs may be removed by pulling them directly outwards once the knobs are in the OFF position. Do not pull knobs up or down or hang objects on them. This can damage the gas valve shaft. See the Surface Burner section for a detailed view of these knobs. The knobs can be washed by hand with soap and water.

When removing burner knobs, remember their location. The knobs are not interchangeable, these knobs must be placed in the same location after cleaning. See the Surface Burner section for a detailed view of these knobs. To replace knobs after cleaning, align the bottom of the knob with the matching clip orientation to the shaft inside the bezel. Push knob until completed seated.

Use a soft, non-abrasive cloth to clean the inside of the bezel. Do not remove diffuser film. Do not expose to moisture or it will damage lighting electronics.

RANGETOP EXTERIOR
Do not use oven cleaners, abrasive cleansers, strong liquid cleaners, steel wool, plastic scouring pads, or cleaning powders on the cooktop surface. Clean with mild soap and water or a 50/50 solution of vinegar and water. Rinse with clean water and dry with a soft cloth. When cleaning surfaces, make sure that they are at room temperature and not in direct sunlight.

Spillage of marinades, fruit juices, tomato sauces, and basting liquids containing acids may cause discoloration and should be wiped up as soon as hot surfaces cool, Then clean and rinse.

Stainless Steel
Do not use a steel wool pad; it will scratch the surface. To clean the stainless steel surface, use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface. Cleaners with oxalic acid such as Bar Keepers Friend Soft CleanserTM will remove surface rust, tarnish, and small blemishes. Use only a liquid cleanser free of grit and rub in the direction of the brush lines with a damp, soft sponge. To inquire about purchasing cleaning products including stainless steel appliance cleaner or polish, see the Consumer Support section for further information.

CARE AND CLEANING

DUAL-FLAME STACKED AND MULTI-RING BURNERS

CAUTION
DO NOT OPERATE THE BURNER WITHOUT ALL BURNER PARTS IN PLACE.

Surface burners should be cleaned routinely, especially after bad spillovers, which could clog the slots and holes in the burner heads.

The electrode is located at the rear of each burner. Do not attempt to disassemble or clean around any burner while another burner is on. An electric shock may result.

To remove the burner parts:

1. Turn all controls OFF before removing any burner parts.
2. When cool, you may lift off the burner grates, burner caps, and burner heads for easier cleaning. Do not remove the burner bases.

NOTE: Be sure to replace the burners in the same location and orientation.
Cleaning the brass burner caps
Monogram burner caps are constructed of 100% brass so that you can take advantage of the natural thermal properties of this premium quality material to elevate your cooking experience.
Real brass has a natural patina that builds up over time as it is exposed to heat and the atmosphere. This patina and deeper brass hue are formed to protect the burners from corrosion. This oxidation process is to be expected and ensures that your brass burners will withstand even the highest temperatures.
To remove burnt-on grease from the caps and restore the beautiful brass look, soak the caps in a solution of 1 cup water and 1 tbsp white vinegar for up to 18 hours or 1 cup water and 1/3 cup white vinegar for up to 1 hour. Wipe with a soft cloth. Do not clean with a metallic brush, as this can damage the brass.
If you do not like the appearance of the brass caps, you may remove the brass insert on the dual-stack burner and replace it with the optional black enamel caps for the multi-ring burner, which are included with your product.

Cleaning the Burner Heads
Lift-off burner parts only when cool. Wash in hot soapy water.
To remove burned-on food, soak the burner heads in a solution of mild liquid detergent and hot water for 20-30 minutes. For more stubborn stains, use a plastic scouring pad or toothbrush.
If the spill goes inside the burner head assembly, wash it under running water and shake to remove excess water.

After Cleaning
Before replacing the burner parts, shake out excess water and then dry them thoroughly.
To replace the burner parts for Multi-Ring:
Align the burner head as shown. Pass the igniter through the opening in the burner head while ensuring the ignitor arrow is pointing toward the ignitor. Make sure the burner lies flat. Install the burner caps taking care to check that they lie flat on the burner head. Check burner operation to ensure uniform, blue flame around the burner. If there are yellow or uneven flames, immediately turn the burner off, let it cool, and readjust the burner and burner caps.

To replace the burner parts for Dual-Flame:
Make sure that the burner parts are replaced in the correct location and orientation.

1. Replace the burner head on top of the burner base, making sure that the hole in the burner head is properly aligned with the electrode in the burner base. A small gap between the base and head is normal.
2. Place the burner cap on top of the burner head. Make sure that the burner cap is properly seated on the burner head.

SPARK IGNITER AND ELECTRODES
The electrode of the electronic ignition system is positioned at the rear of the burner base. When cleaning the cooktop, be careful not to snag the igniter with your cleaning cloth. Damage to the igniter could occur.
Be careful not to push in a control knob while cleaning. It could cause the igniter to spark.
Make sure that the white ceramic igniters on the cooktop are dry and clean. Clean the metal portion of the electrode with a soft cloth or emery board.
Do not attempt to remove the electrode from the cooktop.

BURNER GRATES
The enameled cast-iron burner grates should be cleaned regularly.
Wash them in hot soapy water, rinse, and dry thoroughly.
Although they are durable, the grates will gradually lose their shine, regardless of the best care you can give them. This is due to their continual exposure to high temperatures.
Do not operate a burner for an extended period of time without cookware on the grate. The finish on the grate may chip without cookware to absorb the heat.

For stability, the frames have rubber pads on each corner. During cleaning and use, be careful not to damage or snag rubber pads.

GREASE TROUGH (on some models)
The grease from the griddle will drain into the enameled castiron grease trough at the front of the range. Ensure the grease trough is pushed underneath the griddle lip in order to catch grease while cooking. Once the trough has cooled, it may be lifted out for easier cleaning.
To remove the cool grease trough from the griddle, slide it toward the front and lift it up.
Do not allow grease to accumulate in the grease trough as it can be a fire hazard. Clean the grease trough as soon as they are cool. The grease trough can be cleaned by hand with hot soapy water or in the dishwasher. Wipe any spillage in the trough basin with a soft cloth.

GRIDDLE (on some models)
Thoroughly clean the griddle of grease and food particles, using a square- edged metal spatula, while it is still hot.
Wipe the griddle with a dry, heavy, coarse cloth to remove any remaining residue and food particles. If the griddle is cleaned with anything other than a dry, heavy, coarse cloth, it will need to be reseasoned.

Never flood the hot griddle with cold water. This could cause the griddle to crack or warp.
NOTE: It is normal for the stainless steel griddle to discolor to a yellow-brown color after use.

TROUBLESHOOTING TIPS

Save time and money! Review the charts on the following pages first and you may not need to call for service.

properly grounded outlet.
The gas supply is not connected or turned on.| See the Installation Instructions that came with your range.
A fuse in your home may be blown or the circuit breaker tripped.| Replace the fuse or reset the circuit breaker.
Burner parts not replaced correctly.| See the Care and Cleaning of the range section.
Burner slots near the electrode may be clogged.| Remove the burners and clean them. Check the electrode area for burned-on food or grease. See the Care and Cleaning of the range section.
Food residue on the electrode| Lightly polish flat tip of electrode with a nail file or sandpaper until shiny.
Top burners do not burn evenly| Improper burner assembly.| Make sure the burner caps are seated correctly. See the Care and Cleaning of the range section.
Burner slots on the side of the burner may be clogged.| Remove the burners for cleaning. See the Care and Cleaning of the range section.
Burner flames are very large or yellow| Improper air to gas ratio.| If the range is connected to Propane gas, contact the technician who installed your range or made the conversion.

MONOGRAM LIMITED WARRANTY

Monogram.com
All warranty service is provided by our Factory Service Centers or an authorized Customer Care® technician. To schedule service online, visit us at monogram.com/contact. In Canada, visit monogram.ca.

Servicing your appliance may require the use of the onboard data port for diagnostics. This gives a Monogram Factory Service technician the ability to quickly diagnose any issues with your appliance and helps Monogram improve its products by providing Monogram with information on your appliance. If you do not want your appliance data to be sent to Monogram, please advise your technician NOT to submit the data to Monogram at the time of service.

purchase, we will provide, free of charge, parts, and service
labor in your home to repair or replace any part of the appliance that fails because of a
manufacturing defect.
Limited five-year warranty| For five years from the date of original purchase, we will provide, free of charge, replacement gas surface burners if they fail in normal household use. (The grill and griddle are not included.) You pay for the service trip to your home and all service labor charges.

What Monogram will not cover:

• Service trips to your home to teach you how to use the product.

• Discoloration of the griddle plate.

• Chipping of porcelain enamel grates.

• Replacement of house fuses or resetting of circuit breakers.

• Incidental or consequential damage caused by possible defects with this appliance.

• Damage after delivery.

• Damage to the product caused by accident, fire, floods, or acts of God.

• Product damage or failure of the product if it is abused, misused, used for other than the intended purpose, or used commercially.

• Improper installation, delivery, or maintenance.
  If you have an installation problem, contact your dealer or installer. You are responsible for providing adequate electrical, gas, exhaust, and other connecting facilities as described in the Installation Instructions provided with the product.

• Product not accessible to provide required service.

Staple your receipt here. Proof of the original purchase date is needed to obtain service under the warranty.

EXCLUSION OF IMPLIED WARRANTIES

Your sole and exclusive remedy is product repair as provided in this Limited Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law.

This limited warranty is extended to the original purchaser and any succeeding owner for products purchased for home use within the USA. If the product is located in an area where service by an Authorized Servicer is not available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized Service location. In Alaska, the limited warranty excludes the cost of shipping or service calls to your home.

Some states do not allow the exclusion or limitation of incidental or consequential damages. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are, consult your local or state consumer affairs office or your state’s Attorney General.

Warrantor: GE Appliances, a Haier company
Louisville KY,40225

Warrantor in Canada: MC Commercal Inc., Burlington, ON L7R 5B6

49-2000664 Rev. 2
11-21 GEA
Printed in Mexico

References

• Monogram Appliances
• Monogram WiFi Connected Kitchen | Monogram Smart Kitchens
• 800-626-2000 - Email, Chat or Call" class="nturl" > Contact Monogram - 1-800-626-2000 - Email, Chat or Call
• Official Monogram Appliance Parts & Accessories
• monogram.com/register
• Official Monogram Appliance Parts & Accessories
• Prodsupport.mabe.ca/crm/Products/ProductRegistration.aspx

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>