Oase 706759570107 LunAqua 3 Halogen / LED Pond Light Instruction Manual

LunaAqua 3 Halogen / LED
Operating instructions

REMINDER
CALL 1-866-627-3435
BEFORE RETURNING TO THE STORE.

Information about these operating instructions

Welcome to OASE Living Water. You made a great choice with the purchase of this product LunAqua 3 Halogen / LED.
Prior to operating the unit, please read the instructions of use carefully and fully familiarize yourself with the unit. Ensure that all work on and with this unit is only carried out in accordance with these instructions. Please strictly follow the enclosed instructions to ensure the safe and correct handling of the product. Keep these instructions in a safe place.  Please also hand over the instructions when passing the unit on to a new owner.

**** WARNINGS AND CAUTIONS SYMBOLS

Symbols used in these instructions
The symbols used in this operating manual have the following meanings:

Risk of injury to persons due to dangerous electrical voltage.
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate measures are not taken.
Risk of personal injury caused by a general source of danger.
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate measures are not taken.
Important information for trouble-free operation.

Intended use
unique 3 Halogen / LED, referred to in the following as “unit”, may only be used as specified in the following:

• For use in water fountain systems and ponds.

• For use above and underwater.

• Operation under observance of the technical data.
  The following restrictions apply to the unit:

• Do not use it in swimming pools.

• Inspect the cord for damage before installation and/or maintenance.

Use other than that intended
This unit can be dangerous and cause harm if not used in accordance with these instructions. Any use not in accordance with these instructions or modification(s) to the unit will void the limited warranty.

Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email us at customercare@oase- livingwater.com. Or visit our website at www.oase-livingwater.com

Installation

WARNING
Risk of electric shock. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type receptacle.
Attention! Do not exceed the voltage shown on the transformer.
To reduce the risk of fire or injury, keep the lamp away from materials that may burn.

Important:

• Do not lift the light or the transformer by its power cord.
• Keep the cord away from high temperatures or other heat sources.
• Use a proper power source as indicated on the transformer label.

1. Install the transformer at least 6.6 ft (2 m) from the edge
   of the pond.
   ○ Position the unit in such a way that it does not present a hazard to anyone.
   ○ Ensure safe and stable seating. Ensure the sufficient load-carrying capacity of the wall or ground for installation on the wall or on the base.

Wall or ground installation

Important:

• For installation above water: Ensure a safety distance of at least 1.7 ft (50 cm) from combustible material. Fire hazard: Do not cover the unit!

1. The base foot can either be placed on the ground or bolted to a firm base or load-bearing wall

Tilting the unit

1. Turn the holding screw counterclockwise and tilt the unit as required. To fasten in place turn the holding screw clockwise.

Connect the unit
Attention! Operate the unit at all times with the safety transformer UST 150 from OASE or a different power supply unit meeting the safety requirements.

Attention! Sensitive electrical components.
Possible consequences : The unit will be destroyed.
Protective measures: Do not connect the unit to a dimmable power supply.

Attention! Dangerous electrical voltage.
Possible consequences: Death or serious injuries.
Protective measures:

• Before reaching into the water, disconnect all units located in the water from the mains.
• Disconnect the unit from the mains before performing any work on the unit.
• Secure the unit to prevent unintentional switching on.

Important:

• The unit switches on automatically when a power connection is established.

1. Switching on: Connect the power plug to the socket.
2. Switching off: Disconnect the power plug.

Maintenance and cleaning

Attention! Dangerous electrical voltage.
Possible consequences: Death or serious injuries.
Protective measures:

• Before reaching into the water, disconnect all units located in the water from the mains.
• Disconnect the unit from the mains before performing any work on the unit.
• Secure the unit to prevent unintentional switching on.

Note:

• Ensure that no moisture can enter the unit.

Cleaning the unit

• If necessary, clean the unit with clear water using a soft brush.

Replacing the bulb

• Only use original bulbs from OASE. The unit may be damaged by the use of spare parts from other manufacturers

1. Unscrew the threaded ring.

2.  Remove the glass pane and O ring, check for damage and replace if necessary

3. Remove the defective bulb from the housing.

4. Insert the new bulb.

5. Reassemble the unit in reverse order.
   ○ Ensure that the O ring is correctly positioned.

6. Reconnect to the power supply and check the function.

Storage/Winterization

• Put the unit out of operation at water temperatures below 46 °F (8 °C) or, at the latest, when freezing temperatures are to be expected.
• Thoroughly clean the unit, check for damage.
• Ensure that the storage place is inaccessible to children.

Disposal
Do not dispose of this unit with domestic waste! Disable the unit beforehand by cutting off the cables. Further information about the recycling of this product can be obtained from your local municipal authority.

Troubleshooting

bulb
Water in the spotlight housing| Seal defective| Check sealing rings and replace, if necessary
unique| Model| Model No.| Rated
voltage| Power
consumption| Water
temperature
(operation
underwater)| Ambient
temperature
(operation outside
the water)| Immersion
depth| Cord
Length| Dimensions
---|---|---|---|---|---|---|---|---|---
Modele| Numero
de modele| Tension
nominal| Consommation
Electrique| Temperature
de l’eau (exploitation
sous l’eau)| Temperature
Ambiente
(exploitation hours
de l’eau)| Profondeur d’immersion| Longueur
du cordon| Dimension
Modelo| No. de
modelo| Tension nominal| Consumo
electric°| Temperatura
del agua
(operaci6n
subacuatica)| Temperature
ambient
(operation fuera
del agua)| Profundidad
de immersion| Longitud
de cable| Dimensions
LED| 56463| 12 V AC| 3 W| 39 … 95 °F
+4 … +35 °C| 14 … 104 °F
-10 … +40 °C| max. 13 ft
max. 4 m| 25 ft
7.5 m| 3 x 5.5 in
75 x 140 mm
Halogen| 57010| 20 W
| | |
---|---|---|---
EN| Dust-tight. Watertight to 4 m depth.| The smallest distance to the illuminated object must be 0.5 m| Replace each broken glass
| | | LED Klasse 1| | |
---|---|---|---|---|---|---
EN| Protection class 3| Safety transformer| Do not look directly into the
beam source!| Protect from direct
sun radiation.| Do not dispose of it together with household waste!| Attention! Read the operating instructions

OASE North America INC. www.oase-livingwater.com

References

• Church of Living Water - Home
• OASE Consumer

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>