COSTWAY ES10039US 1500-Watt Garment Cloth Steamer User Manual

ES10039US 1500-Watt Garment Cloth Steamer
User Manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP IT FOR FUTURE REFERENCE.

Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
Follow Costway

Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.

Before You Start

Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
Always place the product on a flat, steady, and stable surface.
Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

PRODUCT INTRODUCTION

Thanks for choosing us! The working theory of this product is touching the fabric by hot steam at 208F to soften the fibers, to make the fabric smooth and neat by the movements of pull and press. The fabric steamer can clean, disinfect and remove the smell, it is popularly used in garment shops, hotels, restaurants, homes, etc, normally with a hanger and hook. Only 45 seconds for heat-up and steam, iron to the fabric, no need ironing board, 60 minutes continuous steam, it helps decrease many traditional ironing steps and save the time. Please use our products without worry, we have a double safety protection device: auto power-off for over-heat or shortage of water! The product is suitable for the cleanse and ironing of any fibers of the garments, curtains, carpets, bedsheets, etc, easy­ operating, portable and time-saving.

NOTICE

Danger

• Don’t wash under the tap and immerse the machine into water or any liquid;
• Be careful with the hot steam, it may burn the skin.

Caution

• Make sure the power supply accord with the power symbol on the product before connecting the power supply, don’t use it with other high voltage appliance under the same power supply
• Please stop using the machine if any part is obviously damaged: the plug, cord, air hose, water reservoir, or the machine
• Repair the machine in the designated service center, do not repair by yourself, impropriate repair may result in leakage of electricity or other accident.
• Don’t walk away when the machine is working.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• The sprinkler will get hotter and hotter, don’t touch it to avoid burning.
• Don’t twist the hose and block the steam hole to avoid accidents due to high air pressure.
• Please hold the heat insulation part when the hose head is hot.
• Don’t insert hot water into the reservoir.
• Don’t mix any cleaner in water.
• Make sure the plug is off when cleaning or adding water.

Remark

• The outlet demands to connect the ground wire.
• Must be used on the level ground
• The steam will cool down and condensate in the hose if the hose is in U status, the steam will be interrupted or water drop come out.
• Please power off and unplug after ironing, for cleaning, or leaving away for a short while.

USING GUIDANCE

• Make sure the reservoir is full of water in the relative position.
• Controlling the angle of ironing steam by the handle which is the connection between the sprinkler and hose.
• Lift and hang the sprinkler on the hook.
• The steam generator is inside the machine.
• Please raise up the sprinkler timely to stretch the hose if you hear a grunt or you see the steam is interrupted.
• Easy-to-move wheels are installed at the bottom, making the machine more convenient to use.

CLEAN AND MAINTAIN

• Please unplug before cleaning the machine.
• Don’t use abrasive cleaner or corrosive liquid(e.g.: alcohol, gas oil, or acetone) and steel cleaning material.
• Use a wet cloth or in-corrosive cleaner, to remove the impurities in the sprinkler.
• Because of the different mineral materials in water in different areas, impurities or sediment will lay at the steam generator. In that case, please unscrew the drain plug of the steam generator, clean and remove impurities and sediment.
• We suggest clearing the steam generator after using it continuously for 15 days.

PARTS AND ACCESSORIES

INSTALLATION

Step 1: Install Stainless steel, Rods. Hook or Hanger

1. Put the main machine on the level ground.
2. Flexible rods: hold rod 2 and rod 3, rotate counterclockwise way for loosing and expanding the rod to the right length, then a clockwise way for tightening (Fig. A and Fig.B)
3. Insert hook 1 into the top of rod 2 and fix it well. The hook is for 360 rotating. (Fig. Aand Fig.C)
4. Insert the rod into the bottom locknut and tighten. (Fig.D)

Step 2: Install the steam hose

1. Insert the hose into the hole, rotate and tighten it. (Fig. 1 )
2. Put the sprinkler on the hook. (Fig.2)

Step 3: Install the brush/pant hook

1. Suit the brush on the sprinkler.(Fig. 1)
2. Insert the pant hook into the prompt position of the sprinkler.(Fig. 2 )

Step 4: Install the hanger

1. Insert the hook on the top of the rod set.(Fig.1)
2. Insert the hanger on the hook.(Fig.2)
3. Hold both Arm A&Arm B to open the hanger outward, it’s open in place when a cracking sound is heard.(Fig.3)

Remark:

1. No Push to open the hanger.(Fig.3)
2. Close the hanger: Press the “PUSH” button, hold Arm A & Arm B to close the hanger inward.(Fig.3. 4)

OPERATION

Step 1 : Preparation

1. Put the machine on the ground, take out the water reservoir. (Fig. 1 )

2. Check the reservoir, if there’s deposition, clear it according to the instruction.

3. Reverse the reservoir, press the valve 2 or 3 times to make sure it works.
   Notice: Do not open the valve to avoid damage.(Fig.2)

4. Fill in the water reservoir. (Fig. 3)

5. Tighten the cover. (Fig. 4)

Step 2: Injection

• Available water types: common running water. You may mix the distilled water with the running water for better.
• Do not mix the perfume, vinegar, cleaner or other chemicals into the water.

1. Disconnect the power supply before injection.
2. Put the full storage onto the machine.

Remark: Water storage is set in the front or at the back of the main machine, as shown in pictures 1 and picture 2.

Step 3:Start

1. Make sure the machine is powered off.
2. Insert the plug into the right outlet.
3. Power on the on/off switch.
4. The machine starts when it lights.
5. Steam starts after 45 seconds.

Remarks:

• Double-temperature control model: When you switch on the button, the heat power is at OW( perfect for thin fabrics). When the two buttons are on the power is at 1500W (perfect for heavy fabrics).

Remark: The power switch or operation panel is separately set in the front or at the back of the machine, please work it according to the actual condition.

IRONING METHODS

• Leave the steam away to people.
• Don’t touch sprinkler holes when the machine works long time, keep 20cm(7.87″) away with the body.
• Hose will be getting hotter, it’s normal in ironing.
• Easier removal for the fabric with fewer wrinkles.
• Level the fabric before starting.
• Fix the hanger or hook before ironing a towel. handkerchief or other soft material.
• Ironing repeatedly for thick fabric.

1. Hang the fabric or garment. (Fig. 1 )
2. Upwards the sprinkler, move the sprinkler up and down for wrinkles removal. (Fig. 1 )
3. Level the fabric or garment by hand when moving the sprinkler for better.(Fig. 2)
4. Pants clamp: level and clip pants tightly, move the sprinkler slightly several times, a fiat straight line can be seen. (Fig. 3)
5. Using a brush to remove dust, not for soft fabrics: silk and satins. (Fig. 4)

DRAIN THE WATER RESERVOIR AND STOW THE MACHINE

1. Power off. It’s normal for steaming after power off for a short while.
2. Unplug from the outlet.
3. Cooling down the machine for 30 minutes at least
4. Open the water reservoir cover and drain the water in the tank. (Fig. 1 )
5. Loosen the down locknut, take out the rods Flexible rods length is easy for storing up.(Fig. 2 and Fig. 3)
6. Loosen the steam hose front end, take out the hose. (Fig. 2 and Fig. 3)
7. Empty the rest water in the steam generator. (Fig. 4)
8. Stow the machine in a safe and dry position.

Notice: clear and drain the water reservoir and steam generator twice a month. In order to assuring safe operation, please clean the machine and keep it dry after use.

TROUBLESHOOTS

On this page, we have concluded all problems probably happened, please check the machine according to the information below. If you can’t solve the problem by yourself, please contact our customer service.

Connect power supply Switch on Check it out and fasten it Replace components
No steam| Lack of water| Switch it off, inject water
Sprinkler drips water| Condensation in the pipe Sprinkler broken| Lift the sprinkler, let the drips flow back to the water reservoir
Replace the sprinkler
Steampipe buzzes| Pipe curls
The sprinkler is lower than the horizon| Straighten the pipe Lift the sprinkler
Light problem| Blow a fuse Poor contact| Replace fuse
Check the plug and outlet

CIRCUIT DIAGRAM

There are 3 series of fabric steamers, they are Double Temperature Control Type, Nimble Type, and Digital type. The related circuit diagrams are as below.
It’s available to refer to a similar type for the following without remarkable circuit diagrams.

1. Double Temperature Control Type:

MODELS & SPECIFICATIONS

You may find the related product specifications on the actual merchandise for the model which is not included in this user’s manual.

Packing List
Main machine……………………….. I Set
Rod………………………………………. I Set
Sprinker…………………………………I Set
Brush…………………………………….. I Set
Hook……………………………………… I Set
Instruction…………………………… Set
Pants clip……………………………… Set

Note: Special Model without Pants Clip.

Welcome to visit our website and purchase our quality products!
With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS, and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich

Reward Points
Exclusive Customer Service

• Personalized Recommendations
  Permanent Shopping Cart
  Order History
  5 Star Rating
  

We would like to extend our heartfelt thanks to all of our customers for taking the time to assemble this product and giving us valuable feedback.

http://www.costway.com/hysalesrule/qr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>