Shenzhen Quanmeng Technology G3 Business Bluetooth Headset User Manual
- June 6, 2024
- Shenzhen Quanmeng Technology
Table of Contents
BUSINESS BLUETOOTH HEADSET
G3
User Manual
CE Cerfificate NO. Dt.2020114591C
Report Na VS190830059A5
Package List
Features
- Built-in intelligent voice prompts
- Built-in high-definition microphone, advanced 4X noise-canceling technology.
- Ergonomics, lightweight design. 180 degree rotatable apply to both left and right ears.
- Separate power mute and volume buttons allow easy access and control.
- Pair easily with any two Bluetooth devices at one time.
- Compatible with all Bluetooth-enabled devices and high-fidelity stereo music player.
Product Specifications
- Headset battery capacity: 110mAh
- Talk time: Up to 10hours
- Music playtime: 8 hours
- Headset charging time: about LS hours
- !phone battery indication
- Standby time: 180 hours
- Bluetooth Version: V 0
- Operating Range: up to 33 feet (accessibility, empty place)
- Support HFP, HSP, A2DP, and AVRCP profiles
- Working environment
Comfortable Wear
The 270 degrees rotatable mid allows to adjust the angle and fit this headset in right or left ear
Replaceable Earplugs
Please choose the right size ear tips to ensure the comfortable wearing and
perfect using effect turn and adjust the earbuds to the most comfortable
wearing position
Key Functions
Turn On/Off
Turn On: Press “MFB” for 2S, then red and blue led light flash
alternately.
Turn Off: Press “MF13′ for 3S until the red light flashes
MFB
| Answer/End Calls | Single-click “MFB” |
|---|---|
| Reject Calls | Press “MFB” for 3s |
| Redial Last Call | Quickly tap “MFB” twice |
| Play/Pause | Single click “MFB” under music play status |
Voice Prompts
- When the headset is on, there will be the automatic voice prompt power on
- When the headset is off, there will be the automatic voice prompt power off
- When being connected successfully, there will be an automatic voice prompt your headset is connected
- When being disconnected, there will be an automatic voice prompt your headset is disconnected
Mute Control
Mute Control
| On/Off | Single click mute switch during a call |
|---|
Siri Control
| Sin for iPhone | Single click mute switch |
|---|
LED Indicator
| r Pairing status | Red and blue light flashing alternately |
|---|---|
| Pairing successfully | Blue light keeps flashing |
| Charging status | Red light keeps on |
| Charging complete | Red light change blue light,then turns off |
| ‘ Low battery | Red light turns on with indicate voice |
Music control
| Volume + | Single-click ‘V+ – |
|---|---|
| Next Track | Press “V + “ for 2S |
| Volume- | Single-click “V-“ |
| Previous Track | Press “V” for 2s |
For ios
Headset volume and ios device volume are synchronized, so you can modify
volume by headset or by the ios device
For Android
Headset volume and android phone volume are Not synchronized. Even if the
headset volume is full blast you can increase volume on an android phone
Headset Pairing
Super Easy to Pair Turn on the headset connect Bluetooth < A8
- Turn on the headset and then the headset will enter into the pairing model
- Turn on the device Bluetooth and search for -Atie to connect
Pair with 2 Device Simultaneously
- Follow Headset Pairing’ to pair the first Bluetooth device.
- Turn off the first Bluetooth device, then the headset enters the pairing mode.
- Repeat step 1 to pair the second Bluetooth device.
- Turn on the first Bluetooth device
- Turn off the headset then turn on the headset again. the headset will automatically connect to the second Bluetooth device. then click connect on the first Bluetooth device, now the headset pair with 2 devices simultaneously
Note
When the headset is used for a period of time, if the headset can not be
connected to the device, please restore the factory settings.
WAY: When the headset is charging, press the MFB button for 5 – 6 seconds, and
the blue light flash once, then the headset restores to the factory setting.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction