Shenzhen Quanmeng Technology A6 Business Bluetooth Headset User Manual
- June 6, 2024
- Shenzhen Quanmeng Technology
Table of Contents
Business Bluetooth Headset
User Manual
Features
- Built-in intelligent voice prompts
- Built-in high definition microphone, advanced 4X noise-canceling technology_
- Ergonomics, lightweight design. 180 degree rotatable apply to both left and right ears.
- Separate power mute and volume buttons allow easy access and control.
- Pair easily with any two Bluetooth devices at the same time.
- Compatible with all Bluetooth-enabled devices and high-fidelity stereo music player.
Product Specifications
- Headset battery capacity: 85mAh
- Talk time: 14hours
- Music playtime: 12 hours
- Headset charging time: about 1.5 hours
- Charging case battery capacity:500mAh
- iPhone battery indication
- Standby time: 240 hours
- Bluetooth Version: V5.I
- Operating Range: up to 33 feet ( without obstacle)
- Support HFP.1-151″, A2DP and AVRCP profiles
- Working environment-10-50 C
Voice Prompts
- When the headset is on. there will be the automatic voice prompt: power on
- When the headset is off, there will be the automatic voice prompt: the power of
- When being connected successfully, there will be an automatic voice prompt: your headset is connected
- When being disconnected. there will be an automatic voice prompt: your headset is disconnected
How to Wear?
In-oar Design not easy to fall off even in vigorous exercises
For the optimal audio experience, try each of the eagles, It should be tight
and secure in your ear. —
- The initial state of the headset
3 Rotate the Earplugs 20- in the direction of the red arrow ®Right ear
How to Wear?
Package List
(08luetooth adapter combination
(Include” Bluetooth adapter) combination (No Include’ Bluetooth adapter)
Function Description
Key Functions
Power ON /Off
| Power ON | PullI the switch to the blue blight blinks alternately |
|---|---|
| Power off | Pull the switch to the “OW cide.red light keeps on and turns off |
MFB
| Answer/End Calls | Single-click ‘MFB |
|---|---|
| Reject Calls | Press an MFB far 3S |
| Sir I for Lphont | Quickly tap `M113′ twice |
| Play/Pause | Single-click ‘MFB as under music play slaw |
| Mute On/Off | Single click mute switch during a call, |
|---|
Music control
| Volume• | Single click V. |
|---|---|
| • Next Track | Press V. for 25 |
| Volume- | Single click *V- |
| ‘ , Previous Track | Press ‘V-* for 25 |
For Los
Headset volume and ios, device volume are synchronized, so you can modify
volume by headset or by the ios device
For Android
Headset volume and android phone volume are Not synchronized. Even if headset
volume full blast, you can increase volume on an android phone
| Charging Status. | Red light keeps on Red |
|---|---|
| Charging Complete | Red light turns of |
| Pairing Status | Red and blue liggViiicing alternately |
| Low Battery | Red light turns On with indicate Voice |
Smart control
-
Power On Automatically
The headset will power on automatically after leaving the case -
pick Up to Answer
The headset can be activated within 3S after leaving the case. and it can be used without wearing it for a long time -
Cut Off Automatically
The headset will cut off automatically after put in the case
Note : The headset must be turned on and paired with the mobile phone If the headset is turned off, there is no such function —
Headset Pairing
Super Easy to Pair Turn on the headset connect Bluetooth c A6>
- Turn on the headset and then the headset will enter into the pairing mode
- Turn on the device BlueTooth and search for -A6- to connect
NOTE 1: The phone can’t find the Bluetooth headset. Solutions: Please clear all old Bluetooth devices on the phone. Then repeat the above steps to match again. 2:The phone can t pair with the Bluetooth headset after using some time. Solutions: Please clear all old Bluetooth devices on the phone. Then repeat the above steps to match again.
Pair with 2 Device Simultaneously
- Follow ” Headset Pairing” to pair the first Bluetooth device.
- Turn off the first BlueTooth device, then the headset enters the pairing mode
- Repeat step 1 to pair the second Bluetooth device
- Turn on the Bluetooth on the first device and turn off the BlueTooth headset
- Turn on the Bluetooth headset and it will automatically connect with the two devices
Note : Step 4 is necessary to make sure the two Bluetooth devices will be connected simultaneously.
How to charge?
| Charging status | White light flash alternately |
|---|---|
| Charging complete | all white light keeps on |
WARNING! Charging voltage 4 2 SV No more than SV’ Overvoltage will damage the battery
Two Charging Models
| Charging Status | The red light keeps on |
|---|---|
| Charging Complete | Red light turns off |
1 . charging with Charging cable
2. charging with Charging case
| Charging Status | The red light keeps on |
|---|---|
| Charging Complete | Red light turns off |
WARNING! Charging voltage:4.2•5V. no more than overvoltage will damage
the battery.
Battery Warning
- Use DC-5V 1A chargers/adapters certified by a regulated manufacturer to charge the case
- Do not overcharge the battery case for too long time, which will decrease the battery service life
- Battery usage by children should be supervised
- Dispose of batteries according to local regulations and recycle when possible
- Do not dispose of household waste
- In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. In the event of a leak or a hazard seek medical help immediately
Warranty
We provide 30 days money-back warranty and 180 days warranty service, if
you encounter issues with our products, please feel welcome to contact us
through amazon.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>