Shenzhen Quanmeng Technology G5 Business Bluetooth Headset User Manual

Shenzhen Quanmeng Technology

Shenzhen Quanmeng Technology G5 Business Bluetooth Headset

Features

• Built-in intelligent voice prompts
• Built-in high-definition microphone, advanced 4X noise-canceling technology.
• Ergonomics, lightweight design. 180 degree rotatable apply to both leh and right ears.
• Separate power mute and volume buttons allow easy access and control.
• Pair easily with any two Bluetooth devices at one time.
• Compatible with all Bluetooth enab1ed devices and high-fidelity stereo musk player.

Product Specifications

• Headset battery capacity : SSmAh
• Talk time: l2hours
• Music playtime: 10 hours
• Headset charging time; about 1.5 hours
• Charging case battery capacity : 5OOmAh
• phone battery indication
• Standby time: 240 hours
• Bluetooth Version; VS.l
• Operating Range: up to 33 feets (accessibility, empty place)
• Support HFP, HSP, AlDP and AVRCP profiles
• Working environment: -10-50C

How to Wear?

For the optimal audio experience try each of the eargels. it should be tight and secure in your ear

Package List

Function Description

Key Functions

LED Indicator

Pairing status

Pairing successful

Charging status

| Red and blue light flashing alternate! Light turns off

The red light keeps on

---|---
Charging complete| Red light change blue light, then tums off
Low battery| Red light turns on with indicate voice

For ios
Headset volume and ios device volume are synchronized, so you can modify volume by headset or by the ios device

For Android
Headset volume and android phone volume are Not synchronized. Even if headset volume full blast, you can increase volume on android phone

Headset Pairing

NOTE

1. The phone can’t find the Bluetooth headset.
   Solutions: Please clear all old Bluetooth devices on the phone. Then repeat the above steps to match again.

2. The phone can’ t pair with the Bluetooth headset after using some time.
   Solutions: Please clear all old Bluetooth devices on the phone.Then repeat the above steps to match again.

Pair with 2 Device Simultaneously

1. Follow “Headset Pairing” to pair the first Bluetooth device.
2. Turn off the first b1uetooth device, then the headset enters the pairing model.
3. Repeat step 1 to pair the second bluetooth device.
4. Turn on the first bluetooth device
5. Turn off the headset. then turn on the headset again.the headset will automatically connect to the second bluetooth device. then click connect on the first bluetooth device, now the headset pair with 2 device simultaneously

How to charge?

1. During the charging process, the battery level of the charging box is displayed
2. After the charging is completed, if the charging is not disconnected, the battery level will always be displayed as 100%.
3. After the charging is completed, disconnect the charging, the battery display will go out after 5 seconds.

How to charge the headset?

1. Put the Bluetooth headset into the charging box.
   (picture 1)

2. During the charging of the Bluetooth headset, after the Bluetooth headset LED light turns red, the battery level of the charging box is displayed for 5 seconds and then goes out. and it enters the charging mode. After charging is complete, the LED light of the Bluetooth headset turns from red to green, and then goes out.(picture 2)

Note: When the headset is turned on •nd off, the ch•rging box can charge the headset

Smart control (the headset is turned on)

1. Power On Automatically
   The headset will power on automatically after leaving the case

2. Pick Up to Anwer,
   The headset can be activated within 3S after leaving the Case and it can be used without wearing it for a long time

3. Cut Off Automatically
   The headset will cut off automatically after being put in the case.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>