Akko 5087B V2 Multi Modes Mechanical Keyboard User Manual

September 7, 2024
AKKO

Akko 5087B V2 Multi Modes Mechanical Keyboard

Specifications:

  • Model: 5087B V2
  • Connectivity: USB, Bluetooth 1, Bluetooth 2, Bluetooth 3, 2.4G Wireless
  • Compatibility: Windows and Mac

Product Usage Instructions

Packing List: Make sure all items are included as per the packing list.

System Requirement: Ensure your system meets the compatibility requirements.

Connectivity Method: Plug the USB cable into an available USB port on your computer to start using the keyboard.

LED Indicators: Refer to the LED indicators for different modes and statuses of the keyboard.

Re-Connecting: Follow the instructions to reconnect the keyboard if needed.

Pairing: Pair the keyboard with the desired device using the appropriate method.

5087B V2 Plus HotKeys: Utilize the hotkeys for various functions including file explorer, email, media controls, and system commands.

5087B V2 System Commands (Windows/Mac): Execute specific system commands for Windows or Mac systems using the keyboard shortcuts provided.

5087B V2 Backlight Settings: Adjust the backlight settings using the specified key combinations for different effects and animations.

FAQ

  • Q: How do I switch between different connectivity modes?
    • A: Use the designated key combinations to switch between USB, Bluetooth, and 2.4G wireless modes.
  • Q: How do I reset the keyboard to factory settings?
    • A: For Windows, hold down Left Win and press Right Win Key for 5 seconds. For Mac, refer to the manual for specific instructions.
  • Q: How do I adjust the backlight brightness?
    • A: Use the Fn key in combination with other keys to adjust backlight brightness and effects.

Thank you for supporting Akko

To provide you with a better user experience, please read this manual carefully before using the product.

Packing List

System Requirement

Windows®XP / Vista / 7 / 8 / 10 or higher version

Connectivity Method

Connect the keyboard to your computer by plugging in the USB cable into an available USB port to start using it.

LED Indicators

State Indicator Re-Connecting Pairing Connected
Bluetooth device 1 LED for Key E Blue light blinks slowly Blue light blinks
fast Blue light stays on for

2 seconds and then goes out

Bluetooth device 2| LED for Key R| Blue light blinks slowly| Blue light blinks fast| Blue light stays on for

2 seconds and then goes out

Bluetooth device 3| LED for Key T| Blue light blinks slowly| Blue light blinks fast| Blue light stays on for

2 seconds and then goes out

2.4G wireless device| LED for Key Y| Green light blinks slowly| Green light blinks fast| Green light stays on for

2 seconds and then goes out

Wired mode| LED for Key U| N/A| N/A| Red light stays on for

2 seconds and then goes out

Status| Indicator| Indicating mode
Low Battery| Side LED Indicator 2| White light blinks slowly
Charge| Side LED Indicator 2| Steady white
Fully Charged| Side LED Indicator 2| LED OFF
Caps| Side LED Indicator 1| Steady white
Lock Win| Side LED Indicator 3| Steady white

5087B V2 Plus HotKeys

Fn+

| F1|  | File Explorer
---|---|---|---
F2|  | E-mail
F3| =| Windows Search
F4|  | Browser Homepage
F5|  | Media

Fn+

| F6|  | Pause/Playback
---|---|---|---
F7|  | Previous Song
F8| =| Next Song
<|  | Decrease Volume

|  | Increase Volume

Fn+

| M|  | Mute
---|---|---|---
w| =| Swap WASD with

↑↓ ← →

5087B V2 System Commands (Windows)

Lock Windows Key

  • Press Fn and
  • Left Win Key

Restore Factory Settings

  • Hold down Left Win and
  • Press Right Win Key for 5s

Revert Ctrl into Menu Key

  • Hold down Fn and
  • press right Ctrl for 3s

5087B V2 System Commands (Mac)

5087B V2 Backlight Settings

5087B V2 Connection Guide

Back Switch Indicator

  • Left: Windows(built-in power on)
  • Medium: Default Windows (built-in power off)
  • Right: Mac (built-in power on)

Bluetooth Pairing

After turning on the keyboard, press Fn+E/R/T to enter Bluetooth mode. Press and hold the Fn+E/R/T combination keyV for 3 seconds to put the keyboard in pairing mode, with the blue indicator light flashing quickly. After successful pairing, the keyboard will enter a low-power sleep mode after being idle for 2 minutes. It will enter the hibernate state 15 minutes after entering the low- power sleep mode.

2.4G Pairing

After turning on the keyboard, press Fn+Y to enter the 2.4G mode. Then press Fn+Y for 3 seconds to enter the pairing mode. Insert the receiver, and the green indicator light will blink quickly. After a successful pairing, the mode light will stay on for 2 seconds. If no paired device is found after 30 seconds, the device will exit the pairing mode, and the mode light will turn off, putting the keyboard into sleep mode. After successful pairing, the keyboard will enter a low-power sleep mode after being idle for 2 minutes. It will enter the hibernate state 10 minutes after entering the low-power sleep mode.

Battery Level Check

Press the Fn + Space combination keys to check the battery level in wireless mode. If the battery level is below 30%, the LED for number keys 1-2 will show a red light. If it’s between 30-100%, the LED for number keys 1-9 will show a green light. And when the battery is fully charged, the LED for number keys 1-0 will show a green light.

Key/Lighting Effects Customization Instruction

  1. The driver can be connected and lighting and key can be customized under the three working modes of the keyboard.
  2. The three working modes of the keyboard can be matched to drive the music rhythm
  3. Please download the Akko Cloud driver on our website
  4. Users can download the driver via en.akkogear.com

AKKO Warranty and Service Statement

Akko provides One-Year warranty for customers in mainland China. For other regions, please contact your seller (Akko distributor) for specific warranty policy. If the warranty window expires, customers need to pay for repairs. Akko will also provide instructions if users prefer to repair the keyboard by themselves. However, users shall take full responsibility for any loss happens during self-repair. Defects resulting from disassembly of our product, improper usage and incorrect installation are not covered by warranty. The return and warranty policy may vary in different platforms and are subject to the specific distributor at the time of purchase.

  • Company: Shenzhen Yinchen Technology Co., Ltd
  • Address: 33 Langbi Rd, Bitou Community 1st Industrial Zone, Bao’an District, Shenzhen, China
  • Tel: 0755-23216420
  • Website: www.akkogear.com
  • Origin: Shenzhen, China

Precautions

Man-made damage is not limited to immersion, falling off, and pulling off the wires with excessive forces, etc.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals