NISBETS ESSENTIALS DA091 5kg Electronic Scales Instruction Manual
- June 6, 2024
- NISBETS ESSENTIALS
Table of Contents
- Features:
- To install or replace batteries
- LCD Screen:
- Button function
- Mode conversion
- To convert weight unit
- To start weighing
- “ZERO” or “TARE” function
- Shut off
- Warning indicators
- Cleaning, Care & Maintenance
- Compliance
- DECLARATION OF CONFORMITY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Electronic Scales
Instruction manual Model: DA091
Features:
- Indicates the volume of milk and water
- Converts between metric and imperial measurements, for both weight and volume
- Low battery power / Overload indication
- High precision strain gauge sensor
- Zero and tare function
- Auto-off
- Increment: 1g/0.1oz
- Max. load capacity: 5kg / 11lb
- Min. load capacity: 20g
To install or replace batteries
- Remove the battery compartment cover (on the bottom of the appliance).
- Insert 2 x 1.5V AAA batteries (not supplied), and ensure to follow polarity markings on the battery compartment. Re-locate the battery compartment cover.
- Position the appliance on a flat stable surface.
Note: It is important that the scales are level to ensure accuracy.
LCD Screen:
Button function
MODE Mode conversion
Turn on / Turn off / Zero / Tare
UNIT Convert unit systems between Metric and imperial
(Conversion button on the bottom of the appliance)
Mode conversion
- Press to turns on.
- Press the MODE button to select the desired mode as shown below.
To convert weight unit
If the scale is with both unit systems of metric (g, ml) and Imperial (lb:oz,
fl’oz), press MODE bottom to choose the working mode (weight, milk volume,
water volume). Then press the UNIT conversion button to convert between two
systems.
Take the conversion of weight unit for example:
- When setting “g” as weight unit, the default volume unit is “ml”.
- When setting “lb: oz” as weight unit, the default volume unit is “fl’oz”.
To start weighing
Weighing mode
- Place a bowl (if necessary) on the scale.
- Press to turns on. Wait until LCD shows “O”.
- Press the MODE button to convert to weighing mode.
- Load weighing object on the scale (or in the bowl) to start weighing. LCD will show the weight reading.
- If the weighing object is water or milk, press the MODE button to choose volume mode and view the volume of the weighing object.
Volume indication mode
-
Press to turns on. Wait until LCD shows “O”.
-
Press the MODE button to choose “Water” or “Milk” mode.
-
Put a liquid container onto the scale platform.
LCD shows the weight of the container. -
Press to zero or tare weight.
-
Pour the liquid (water or milk) into the container. LCD shows the volume of the liquid.
-
Press the MODE button to choose “Weight” mode and view the weight of the liquid.
“ZERO” or “TARE” function
To weigh different loads consecutively without removing previous loads from the scale:
- Put the first Load on the scale and get a weight reading.
- Press the button to reset the reading to “O” before adding the next load. You can repeat this operation.
Condition 1: “ZERO” function
When the total sum of all loads on the scale is ≤4% of the scale’s max. weight
capacity (4% here means 200g with this scale), LCD will show “—–” or “0g” each
time is pressed.
“—–” means reading is not stable. Please wait for a moment. “0g” and meanwhile
an icon “O” on the left side of LCD indicate ZERO function is activated. In
this case, Max. weight capacity remains unchanged.
Condition 2: “TARE” function
When the total sum of all loads on the scale is >4% of the scale’s max. weight
capacity, LCD will show “—–” or “0g” each time is pressed.
“—–” means reading is not stable. Please wait for a moment. “0g” and meanwhile
an icon “T” on the left side of LCD indicate TARE function is activated. In
this case, Max. Weight capacity is reduced by the total weight of all loads.
Under this condition:
- By pressing , you can see the total weight of all loads on the scale.
- To weigh more loads, just press to reset LCD reading to ‘0’ again.
Shut off
Auto shut-off: Auto shut-off occurs if LCD shows ‘0’ or shows the same
weight reading for 2 minutes.
Manual shut-off: To maximize battery life, press the button continuously
to turn off the scale after use.
Warning indicators
| Low battery.
Replace with new batteries.
---|---
| Scale overloaded.
Remove items to avoid damage
Cleaning, Care & Maintenance
- Clean the case with a damp cloth and warm water.
- Remove the batteries if the unit is not to be used for an extended period of time.
Compliance
Dispose of depleted batteries in accordance with local regulations, within the
EC there are nominated disposal points for batteries.
The WEEE logo on this product or its documentation indicates that the product
must not be disposed of as household waste.
To help prevent possible harm to human health and/or the environment, the
product must be disposed of in an approved and environmentally safe cycling
process. For further information on how to dispose of this product correctly,
contact the product supplier, or the local authority responsible for waste
disposal in your area.
Nisbets Essentials parts have undergone strict product testing in order to
comply with regulatory standards and specifications set by international,
independent, and federal authorities.
Nisbets Essentials products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or
transmitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of Nisbets
Essentials.
Every effort is made to ensure all details are correct at the time of going to
press, however, Nisbets Essentials reserves the right to change specifications
without notice.
DECLARATION OF CONFORMITY
Equipment Type | Model |
---|---|
Electronic Scales 5 Kg | DA091 |
Application of Territory Legislation &Council Directives(s) | Electro-Magnetic |
Compatibility (EMC) Directive 2014/30/EU – recast of 2004/108/EC
EN 55014-1: 2017
EN 55014-2: 2015
Restriction of Hazardous Substances Directive (RoHS) 2015/863 amending Annex
II to
Directive 2011/65/EU
Producer Name| Nisbets Essentials
I, the undersigned, hereby declare that the equipment specified above conforms to the above Territory Legislation, Directive(s), and Standard(s).
Date | 23rd October 2020 |
---|---|
Signature | |
Full Name | Ashley Hooper |
Position | Technical & Quality Manager |
Manager/
Responsible Supplier
Producer Address| Fourth Way,
Avonmouth,
Bristol,
BS11 8TB
United Kingdom| 2 North Point Business Park
New Mallow Road
Cork
Ireland| 15 Bagdally RoadCampbelltown
NSW 2560
+44 (0)845 146 2887
http://www.nisbets.com/
DA091_EN_A5_v2_20201030
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>