Axley 013759 Pop UP Tent Instruction Manual

013759
Pop UP Tent
Instruction Manual

POP-UP TENT
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions).

Jula reserves the right to make changes. For the latest version of operating instructions, see www.jula.com

JULA AB, BOX 363, SE-532 24 SKARA
2022-01-31
©Jula AB

SAFETY INSTRUCTIONS

• Do not use the product in strong wind.
• Do not use products near strong chemicals or a naked flame.

ASSEMBLY

Follow these instructions carefully — the risk of a pinch injury. At least two adults are needed for assembly.

1. Place the product in the middle of the area to be covered. Remove the storage bag and put the folded product on its feet. Before moving the product, check that none of the roof stays have fastened. FIG. 1
2. Stand on each side of the product and take hold of the two outer legs. Lift the frame a little and take one short step back. Do not pull too hard backward, this could bend the side stays. FIG. 2
3. Press the top and bottom edges of the square formed by the side to stay together. Repeat on the opposite corners and take small steps back each time, until the product is almost completely unfolded. FIG. 3
4. Hold down the top part of the leg with one hand and bring up the locking sleeve with the other hand until it engages. The button should engage in the lock hole. Repeat for the other three legs. FIG. 4 FIG. 5
5.  Place the tent fabric over the frame. Fasten the velcro straps on the underside of the roof, around the frames. FIG. 6
6. Put one foot each on the footplate at the bottom of two adjacent legs, then pull up so that the inner part of the leg is pulled out and the button engages in the lock hole. Repeat for the other two legs. FIG. 7
7. Adjust the product. FIG. 8
8. Secure the product by anchoring the guys, which sit in rings on the corners of the root with tent pegs. Alternatively, the tent pegs can be stuck in the ground through holes in the feet. FIG. 9

FOLDING

1. Release the guys and anchors and remove the velcro straps on the roof from the frame. FIG. 10
2.  Lift two adjacent legs a little on each side, press the button and lower the inner part of the leg into the outer part. Repeat for the other two legs. FIG. 11
3. Release the locking sleeves in the four corners by pressing gently up with one hand and pressing the button with the other. Lower the locking sleeve so that the button is free. FIG. 12 FIG. 13
4. Grip the square that is formed by the stays on each side and lift a little. Shake the roof of the tent a little. Move your hands apart and move towards each other until the tent is three-quarters folded. FIG. 14
5.  Grip the two outer legs, lift a little and press the product together. FIG. 15 6. Check that the tent fabric is completely dry. Fold up the product and put it in the storage bag.

MAINTENANCE AND CLEANING

• Clean the tent fabric with soapy water and rinse well.
• Allow the tent fabric to dry before putting it away.
• Wipe the legs with a damp cloth.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>