Axley 429 017 Insect Killer Instruction Manual
- June 5, 2024
- Axley
Table of Contents
429 017 Insect Killer Instruction Manual
Operating Instructions for Insect Killer
Care for the environment!
Recycle discarded products in accordance with local regulations.
Jula reserves the right to make changes.
For the latest version of operating instructions, see
www.jula.com
Jula AB, Box 363, SE-532 24 SKARA
2021-08-19
© Jula AB
SAFETY INSTRUCTIONS
Read the Operating Instructions carefully before use
Save these instructions for future reference.
WARNING:
- For indoor use only.
- Unplug the power cord before cleaning and/or repairs.
- Never insert metal objects through the protective grille on the appliance.
- Do not use the appliance in the vicinity of flammable liquids or gases.
- Check that the mains voltage corresponds to the rated voltage on the type plate.
- Keep out of the reach of children.
- A damaged power cord must be replaced by an authorized service center, or another qualified person, to ensure safe use.
- The appliance must not be used in garages, stables, barns, etc.
- Empty and clean the collection tray regularly.
- The appliance is not intended to be used by persons (children or adults) with any form of functional disorders, or by persons who do not have sufficient experience or knowledge on how to use it unless they have received instructions concerning the use of the appliance from someone who is responsible for their safety.
- Keep children under supervision to make sure they do not play with the appliance.
DANGER: High voltage
TECHNICAL DATA
| Rated voltage | 230 V ~ 50 Hz |
|---|---|
| Output | 2 x 20 W |
OPERATION
The insect killer uses ultraviolet light with a wavelength that has been proven to be most effective in attracting insects such as flies, moths, mosquitoes and other flying insects. It does not use chemicals, sprays, or odors does not contaminate and is not harmful to humans or pets. It is ideal for use in the home, factories, food processing rooms, cold-storage rooms, hospitals, etc.
Use
- Plug the power cord into a wall socket. Check that the rated voltage for the insect killer corresponds to the main supply voltage.
- Set the switch in the ON position to start the insect killer.
- Empty the collection tray from dead insects at regular intervals. To empty the collection tray, lift it up a little and pull it out to the side.