EKR B1144 Bluetooth LED Name Badge User Manual
- June 6, 2024
- EKR
Table of Contents
EKR B1144 Bluetooth LED Name Badge
Operation Introduction
Download App
Install “Mini LedShow” in App Store for iOS device (picture 1) or in Google
Play for android device (picture 2)
Prepare to connect
- Press Power/bluetooth button(a) to power on
- Turn on bluetooth on your cellphone.
- Run app, click “setting” and select “Device Connection” (picture 3) to connect EKR led name badge.
Edit and synchronize messages
- Select “light” icon (picture 4) to edit message
- Pattern: 10 animations were preinstalled, Perfect for party.
- Text: Type“+” to create one or more messages. It will appear on name badge in 3 seconds. You can also adjust scrolling mode, brightness and speed.
- Graffiti: You can create your own pictures by selecting pixels.
- Rhythm: LED name badge will beat with music (picture 5) in the list or beat with surrounding music when click microphone icon on lower right.
Cautions
- After fully charged, please cut off power in time to help protecting battery life.
- Over-powered chargers (Eg: 9V/2A, 12V/2A, 5V/3A, etc) are forbidden and please maintain safe charging operation.
- Do not use the badge while it is being charged.
- Do not expose the name badge to rain or in moisture.
Product appearance and accessories
-
Power / bluetooth button
-
Charging port
-
Megnetic pin
-
Hook & loop tape
-
Badge bar pin
-
USB charging cable
Product Specifications
- Battery Capacity: 320 mAh
- Recharging Time: 5V/1A 3 h; 5V/2A 1.5 h Size: 3.6 inch x 1.2 inch x 0.28 inch Weight: 27 g
- Operating temperature: 32 °F ~ 104 °F Storage temperature: -13°F ~ 113 °F Relative humidity: 0% ~ 90%
- Package list: 1x Led name badge
- 1x USB charging cable
- 1x Megnetic pin
- 1x Hook & loop tape
- 1x Badge bar pin
- 1x Manual
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.